···
Log in / Register

What is the tire model of the MG GS?

4 Answers
JuneLynn
09/02/25 6:12am
The MG GS has two tire models: 235/50R18 and 215/60R17. The first number, 235, represents the tire width of 235MM. The number 60 indicates the tire's aspect ratio is 60%, meaning the section height is 60% of the width. The letter R stands for radial tire, and 16 represents the rim diameter of 16 inches. The MG GS has a top speed of 208km/h and a fuel consumption of 8.3L per 100km. In addition to the model, tires also display the following common data: Tire cord material: Represented by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters from A to Z represent certified speed ratings ranging from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: Indicates the rim size compatible with the tire for practical use, such as standard rim 5.00F.
Was this review help?
17
2
Share
GeorgeDella
09/14/25 8:12am
The original tire model for the MG GS is typically 215/60 R17, which is suitable for most road conditions and city driving. I've been driving this car for several years, and checking the tires is quite simple—just look at the small label on the sidewall of the tire for the specifications. When replacing tires, make sure to go to an authorized store to avoid counterfeit products that could affect grip. Over time, tire wear is inevitable. I check the tire pressure monthly, keeping it around 2.3 bar, as too high or too low can make driving unstable. During maintenance, mechanics often remind me to rotate the tires regularly to extend their lifespan—it's a small cost for peace of mind. If you experience bumps on the highway, check the tires first; don't wait until they're worn out to cause trouble.
Was this review help?
18
0
Share
Expand All
McJeffrey
10/29/25 2:05am
The tire model for the MG GS is generally 215/60 R17, which is a pretty reliable specification. Having worked in a repair shop, I recommend checking the most accurate information yourself by looking at the nameplate on the driver's door frame or flipping through the manual. Most models of this car use this size, but choosing the wrong specification can lead to higher fuel consumption and damage to the suspension. Before changing tires, measure the tread depth; if it's below 1.6mm, it's dangerous and should be replaced immediately. Choose tires based on the season: wear-resistant types for summer and ice-gripping ones for winter. Keeping a spare tire is also a good idea. When buying from a shop, choose within your means—don't go for cheap, unknown brands. Safety comes first.
Was this review help?
12
2
Share
Expand All
VincentLynn
12/12/25 2:17am
The MG GS comes with standard 215/60 R17 tires. My old car uses the same size, making checks super easy: just read the numbers printed on the tire sidewall – it's straightforward. For regular city driving without much highway use, maintaining normal tire pressure is sufficient, no need to overthink it. When replacing tires, consult authorized shops to avoid wrong specifications. For older vehicles, regularly inspect tread wear – if you hear squeaking over bumps, it's a maintenance reminder. Driving safety always comes first.
Was this review help?
10
1
Share
Expand All
More Forum Discussions

Is it allowed to modify the appearance of the exhaust pipe?

No, it is not allowed to modify the appearance of the exhaust pipe, as this constitutes illegal modification and will result in failure to pass the annual inspection. Requirements for vehicle annual inspection: Do not make large-scale alterations to the vehicle's appearance. Do not illegally modify the vehicle, ensure all window glass is intact and free of reflective sunshade film, ensure all lights and instruments are complete and functional, ensure the braking performance is good, ensure the vehicle is equipped with a fire extinguisher and reflective warning triangle, and maintain consistent tire tread patterns. Any changes to the vehicle's appearance must be reported to the traffic police department and the vehicle management office of the public security bureau. Modified vehicles must obtain a new vehicle license. Reasons why modifying the exhaust pipe appearance is not allowed: Modifications such as altering the intake and exhaust systems, widening the body, lowering the chassis, changing brake components, or blindly upgrading high-beam headlights, which change the vehicle's technical parameters, are illegal and will not pass the annual inspection according to regulations. No individual or organization is permitted to engage in the following activities: assembling a motor vehicle or altering its registered structure, construction, or features without authorization; changing the motor vehicle model, engine number, chassis number, or vehicle identification number; forging, altering, or using forged or altered motor vehicle registration certificates, license plates, driving licenses, inspection compliance marks, or insurance marks; or using another motor vehicle's registration certificates, license plates, driving licenses, inspection compliance marks, or insurance marks.
18
0
Share

What does 'beihu' mean in the context of used cars?

'Beihu' in used cars refers to vehicles that cannot be transferred to a new owner. A beihu car is completely normal in all aspects, with all possible documentation complete, annual inspections and insurance up to date, but it simply cannot be transferred. Below is an introduction to beihu cars: Reasons why vehicle ownership is not transferred after a transaction: The license plate's registered location is too far away, making the transfer process too costly; vehicles used as debt repayment; possible cases where the owner has passed away and the vehicle has not been deregistered; transfer of both the license plate and the vehicle in areas with purchase restrictions; out-of-town vehicles that cannot be registered locally due to migration restrictions; commercial vehicles converted to non-commercial use being sold cheaply as beihu cars. Impact of beihu: The beihu has the right to sell the vehicle or report it as lost, which could turn the vehicle into an unregistered one, and traffic police can legally impound it. Moreover, in the event of a traffic accident, the perpetrator is primarily held responsible. If the perpetrator flees, the vehicle owner must compensate first, so being a beihu also carries significant risks. Models of beihu cars: There are two models of beihu cars. The first model is individual beihu, where the original vehicle is registered under an individual's name. The second model is corporate beihu, where the original vehicle is registered under a company's name.
6
3
Share

What is the plastic panel under the car's front windshield called?

The plastic panel under the car's front windshield is called the windshield lower trim panel or the windshield rain tray. Its main function is to drain the water wiped by the wipers through the drainage holes at the bottom to the underside of the car, preventing accumulation. The windshield rain tray is mainly made of rubber and plastic. Over time, exposure to sunlight and rain can cause it to age, leading to gaps between the rain tray and the windshield, as well as clogged drainage holes, resulting in water accumulation. Accumulated water can leak into the engine compartment and transmission area, causing water ingress or rust in related components, which may affect the normal operation of the vehicle. In severe cases, water may even flow into the car through the air conditioning intake, causing floor flooding. Therefore, during daily use, it is important to avoid exposing the rain tray to direct sunlight and to promptly clean any debris accumulated in the gaps to maintain cleanliness. If the drainage holes of the rain tray become clogged, the owner can use a wire or other hard object to unclog them. Special care should be taken when cleaning the drainage holes hidden under the rubber sealing strips to avoid damaging the seals. Alternatively, a syringe and catheter injection method can be used for cleaning. Fill the syringe with clean water, insert the catheter into the drainage hole, and quickly inject the water into the hose. Repeat this process several times to complete the cleaning.
16
3
Share

What is the tire size of a Toyota Corolla?

Toyota Corolla's tire size model is 195/60R15. In 195/60R15, the first number 195 represents the tire width of 195MM, 60 indicates the tire's aspect ratio is 60%, meaning the section height is 60% of the width, and 15 stands for the rim diameter of 15 inches. The middle letter R signifies a radial tire. Toyota Corolla uses Bridgestone tires, and the spare tire specification is full-size. If you want to replace the tire yourself, you can follow the steps below: Take out the spare tire and jack, place the jack under the vehicle frame of the tire to be replaced, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car, the jack should be positioned under the vehicle, check and ensure the jack is at a right angle to the ground; Remove the hubcap, loosen the nuts counterclockwise, do not completely loosen the nuts, just enough to eliminate resistance, when loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts turn rather than the tire; Turn the nuts counterclockwise until they come off, repeat this step for all lug nuts, completely remove the nuts; Place the new tire on the hub, carefully align the tire rim with the wheel bolts, install the lug nuts, tighten the nuts by hand until all nuts are concealed, at this point the tire replacement is completed. Besides the model, the tire also has the following common data marked: Tire cord material: indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed rating of the tire from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification compatible with the tire. For practical use, such as: standard rim 5.00F.
15
1
Share

Can You Still Drive When a Triangle with an Exclamation Mark Appears on the Car?

A triangle with an exclamation mark indicates a malfunction in the car's regular performance, components, or functions. It is advisable to inspect the issue first to avoid potential safety hazards. Common causes include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: Visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault warning in cars. Besides the triangle with an exclamation mark, there are four other forms of exclamation mark warnings: a yellow gear with an exclamation mark, a red circle with parentheses and an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four scenarios: Automatic Transmission Fault: A yellow gear with an exclamation mark indicates an automatic transmission fault warning light, signaling a transmission malfunction or transmission lubricant level below the normal range. The transmission oil should be replaced promptly. Brake System Fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, mainly indicating brake system failure or low brake fluid level. Immediate inspection of the brake system is required to prevent accidents. Tire Pressure Anomaly: A bracket with a horizontal line and an exclamation mark in the middle represents the tire pressure monitoring warning light. This light turns on when the car's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark indicates a lighting fault warning light, signaling a malfunction in one of the car's lights. Solution: Visit a 4S shop for inspection as soon as possible. Alternatively, you can perform a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lights to identify the issue.
6
0
Share

Head-First Parallel Parking Techniques

The head-first parallel parking technique involves keeping the steering wheel turned fully to the right while reversing slowly. Here are the detailed steps: 1. Keep the steering wheel fully turned to the right and reverse slowly: When you can see the front of the car behind you completely in the left side mirror, quickly turn the steering wheel from full right to full left and continue reversing. 2. Use the adjusted right side mirror: Pay attention to the distance between the right rear wheel and the curb. Adjust the car's reversing path by steering to get as close to the curb as possible while maintaining enough distance to straighten the car body. The distance between the wheel and the curb.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.