What is the tire model of the Mercedes-Benz C200?

3 Answers
Viola
07/23/25 5:58pm
The tire model of the Mercedes-Benz C200 is 225/50R17, where 225 indicates the tire's cross-sectional width is 225mm; 50 represents the tire's aspect ratio is fifty percent; R stands for radial tire; 17 denotes the rim diameter is 17 inches. The Mercedes-Benz C200 is a model under the Mercedes-Benz brand, featuring a highly designed front face where the LED daytime running light strip and the lower bumper contour lines form an X-shaped design, creating a strong visual impact. The Mercedes-Benz C200 is equipped with a 1.5T turbocharged engine, delivering a maximum power of 115kW and a peak torque of 250Nm, paired with a 9-speed automatic transmission.
Was this review help?
9
2
Share
DeBeckett
08/10/25 1:33pm
I've been driving a Mercedes-Benz C200 for several years, and I remember the original tires were usually sized 225/50 R17, offering a comfortable and smooth ride. When I first bought the car, it came with this size—225mm tread width on the rear tires, a 50 aspect ratio, paired with 17-inch rims, which were durable and quiet on city roads. However, don’t blindly replace tires, as sizes can vary by model year; for example, the sport version might have 225/45 R18 tires, with larger rims looking sleeker but slightly stiffer. During checks, I always look at the sidewall markings, where the full-size numbers are clearly printed. By the way, regularly checking tire pressure during maintenance can extend their lifespan—safety first! If replacing tires, I recommend brands like Michelin or Pirelli; the original ones are decent too.
Was this review help?
11
3
Share
Expand All
EdenLee
09/22/25 8:09am
As a frequent car enthusiast, I recommend you first determine the tire model based on the wheel size. The standard Mercedes-Benz C200 typically comes with 225/50 R17 tires, where the 50% aspect ratio is well-balanced for daily commuting. However, the sports version or later facelifts often feature 225/45 R18 tires with 18-inch rims, offering a firmer ride but more direct handling. When your tires wear out, don’t just buy the same size without checking—verify the sidewall numbers before replacing to avoid improper wheel fitment. By the way, tire brands like Bridgestone or Continental are highly durable and significantly impact fuel efficiency and safety. Regular wheel alignment can prevent uneven wear, saving you money and hassle.
Was this review help?
14
4
Share
Expand All
More Forum Discussions

What Causes the Prado Key to Not Turn?

The Prado key won't turn because the steering wheel is locked. To resolve this issue and turn the key again, you must simultaneously wiggle the steering wheel while turning the key forward. Here is an introduction to the Prado: 1. The Prado is the latest model in Toyota's Land Cruiser series, featuring excellent power performance and meeting Euro III emission standards. 2. Its advanced engine delivers strong output power and torque, paired with a highly robust frame and reinforced suspension system, making even rugged journeys comfortable and smooth. 3. As a standard feature representing the Prado's spirit, the new model retains the front wide anti-scratch strip design, which is highly practical for off-road adventures. Unlike the bold front style, the Prado's hood appears relatively plain, with no prominent bulges or decorative tangent lines—just a flat surface with straight tangent lines on both sides, giving it a somewhat ordinary look. 4. With a 220mm ground clearance, the Prado offers good off-road capability. Its approach and departure angles, both at 27 degrees, are moderate for this class. The non-load-bearing frame adopts an advanced front double-wishbone independent suspension and rear four-link suspension structure, enhancing the vehicle's torsional and bending rigidity. 5. The new model also comes standard with large 265/65R17 tires, combined with Toyota's advanced four-wheel-drive system and central differential lock, balancing off-road capability with urban driving comfort.
1
2
Share

What is the Difference Between Full-Time Four-Wheel Drive and Part-Time Four-Wheel Drive?

The difference between full-time four-wheel drive and part-time four-wheel drive is: 1. The full-time four-wheel drive system provides power to all four wheels at all times, while the part-time four-wheel drive system allows the driver to switch modes. Vehicles equipped with a part-time four-wheel drive system have three modes: high-speed four-wheel drive mode, low-speed four-wheel drive mode, and high-speed two-wheel drive mode. The structure of the part-time four-wheel drive system is more complex and occupies more space. 2. The part-time four-wheel drive system and full-time four-wheel drive system are used in different types of vehicles. Most luxury SUVs and rugged off-road vehicles use the full-time four-wheel drive system, while the part-time four-wheel drive system is only found in some rugged off-road vehicles. Vehicles equipped with a part-time four-wheel drive system have stronger off-road capabilities. Below is some additional information: Another common four-wheel drive system is the on-demand four-wheel drive system, which is often found in some urban SUVs. Vehicles equipped with an on-demand four-wheel drive system do not provide power to all four wheels at all times. Most of the time, these vehicles operate in two-wheel drive mode and only switch to four-wheel drive under special circumstances.
3
5
Share

What does TCS mean?

TCS stands for Traction Control System, also known as the Track Control System. It determines whether the drive wheels are slipping by comparing the rotation speed of the drive wheels with that of the driven wheels. 1. When the former is greater than the latter, it suppresses the rotation speed of the drive wheels. 2. Its operation mode is very similar to ABS, as both use sensors and brake regulators. Additional Information: 1. When TCS detects wheel slip, it first adjusts the engine ignition timing through the engine control computer to reduce torque output or applies brakes to the slipping wheel. In cases of severe slipping, it further controls the engine fuel supply system. 2. During TCS operation, the transmission maintains a higher gear to prevent sudden downshifts when the throttle is increased, thereby avoiding wheel slip.
18
5
Share

What are the effects of not changing engine oil in a timely manner?

Effects of prolonged non-replacement of engine oil: 1. The primary function of engine oil is to lubricate the engine. If it is not changed for a long time, the oil can become ineffective and deteriorate, which will increase engine wear. In severe cases, it may even lead to engine seizure. 2. Another important role of engine oil is cleaning. If the oil is compromised, it cannot effectively remove impurities (such as carbon deposits and metal particles) generated on the surfaces of engine components. Over time, this not only affects heat dissipation and lubrication but can also clog oil passages, leading to engine damage or even complete failure, with diesel engines being particularly vulnerable to worse operating conditions. 3. The cooling efficiency of the oil will decrease, adversely affecting certain car components. Especially for structurally weaker parts, prolonged exposure can lead to damage or even complete burnout.
7
0
Share

What car brand starts with an 'h' logo?

The car brand that starts with an 'h' logo is Honda. Here is some information about the Honda logo: 1. The 'h' is the visual trademark for both Honda automobiles and Honda motorcycles, representing the first capital letter of 'honda,' the Japanese pronunciation of 'Honda.' 2. 'Harmony between people and vehicles, and between vehicles and the environment' is the development direction of Honda; dynamic, luxurious, and smooth are the consistent styles of Honda; designing powerful, fuel-efficient, and low-emission engines is the technological goal of Honda; attracting more customers with advanced and practical designs, excellent manufacturing quality, and relatively affordable prices is the philosophy of Honda.
15
0
Share

How Long Does It Take to Replace a Car Belt?

Generally, replacing a timing belt takes about 2-3 hours. The method for replacing the timing belt is as follows: 1. Rotate the crankshaft pulley to align the pulley notch with the protrusion on the oil pump housing, adjusting the timing point. 2. Remove the crankshaft pulley bolt and the crankshaft pulley. 3. Remove the lower timing belt cover and the guide pulley. 4. Remove the timing belt tensioner, take off the belt, and then proceed with installation. 5. First, install the tensioner. Adjust it to the loosest position, with the inner angle hole adjustment position mark aligned at 180°. 6. Install the belt and adjust the tensioner. During adjustment, align the lower end of the tensioner notch with the pointer, then tighten the bolt. 7. Assemble the timing belt cover. First install the middle iron cover, then the upper and lower covers, and finally install the generator pulley, tensioner, and belt in order.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.