What is the tire model of the Hyundai ix25?

1 Answers
DeEsther
07/30/25 1:35am
Modern ix25 is equipped with Maxxis brand tires, the Bravo-HPM3 series, which are specifically designed for urban SUV models, with a specification of 215/60R17. Introduction to tire models: The model and specifications of tires are generally marked on the sidewall of the tire, and the information displayed usually includes the tire size, aspect ratio, tread width, etc. The impact of tires on cars: The wider the tire, the larger the contact area with the ground, and the better the driving quality and stability of the car. However, wider tires have greater rolling resistance, and the corresponding fuel consumption will be higher.
Was this review help?
9
5
Share
More Forum Discussions

What Causes Blue Smoke During Cold Starts in Winter?

Reasons for blue smoke during cold starts in winter: 1. Aging, cracking, or damage to the valve stem seals, necessitating replacement; 2. Prolonged incorrect driving habits or overloading, leading to premature engine wear and aging—timely engine repair or replacement is required; 3. Use of substandard engine oil or failure to change the oil for an extended period, resulting in overly thin oil and incomplete combustion. It is recommended to use high-quality engine oil. Engine oil, also known as motor lubricant, serves multiple functions including lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption. It is often referred to as the 'blood' of a car. Engine oil consists of base oil and additives. The base oil is the primary component, determining the fundamental properties of the lubricant, while additives compensate for and enhance the base oil's performance deficiencies, providing additional beneficial properties—making them a crucial part of the lubricant.
17
0
Share

How to Deal with SAIC Maxus G10 Dual Mass Flywheel Failure?

SAIC Maxus G10 dual mass flywheel failure requires manually rotating the driven flywheel to observe the angle between it and the driving flywheel. If the angle is significantly greater than 12 degrees, it indicates an internal failure of the dual mass flywheel, necessitating replacement. The main performance characteristics of the dual mass flywheel are: Torsional vibration isolation, especially the ability to completely filter out engine imbalance in the low-speed range, transmission load reduction, thereby reducing the load and stress generated by the transmission, and crankshaft load reduction, with the flywheel having a very small moment of inertia. SAIC Maxus G10 fault light cancellation: First, press the start button to start the SAIC Maxus G10 vehicle. At this time, there will be a maintenance reminder on the dashboard of the SAIC Maxus G10 vehicle. Then, press the SET button on the steering wheel of the SAIC Maxus G10 vehicle, followed by pressing the SEL button on the right side of the steering wheel.
18
0
Share

Where are the drainage holes on the Volkswagen Lavida's doors?

Volkswagen Lavida's door drainage holes are located at the bottom of the door panel, approximately in the middle position. Generally, there are two drainage holes per door. The function of Lavida's door drainage holes: In addition to draining water, the door drainage holes also protect the electrical equipment inside the door and prevent rust inside the car door, which could damage components such as the door lock mechanism and latch. Dealing with clogged door drainage holes: Check if the door's sealing strip has failed or is damaged, as this can allow rainwater to easily enter the door interior, leading to damage of the waterproof membrane inside. Inspect whether the waterproof membrane is damaged. If it is, rainwater will flow through the gaps onto the door sill, and over time, the drainage holes may become clogged with dust. In this case, the waterproof membrane needs to be replaced. Check if the drainage holes are clogged. If they are, they need to be unclogged using a hard object like a wire to clear the blockage, or the door can be disassembled to clean the interior thoroughly.
11
1
Share

What is the reason for the inability to adjust the front seats of a Jaguar?

Jaguar front seats cannot be adjusted due to wiring issues. The following items were inspected and measured for this vehicle: 1. Inspection: Checked the fuse power supply and grounding of the right front seat, both normal; Upon removing the connector of the right front seat control unit, signs of water ingress and corrosion were observed, and visual inspection also revealed water ingress and corrosion on the right front seat control unit; Checked the air conditioning drain outlet, normal, and the sky drainage is normal; Inspected the front and rear carpets, no wetness or water accumulation found, and the right front door window lift operates normally; External gutter drainage is normal with no blockages, and a leak check at the right front door area showed no signs of water leakage. 2. Measurement: Measured the seat control unit wiring harness, no open or short circuits found, power supply and grounding are normal, CAN line is normal; Measured the right front seat adjustment switch wiring harness, no open or short circuits found, connector shows no corrosion, and pins are properly connected.
9
2
Share

What is the wading depth of the Honda Avancier?

The wading depth of the Honda Avancier is approximately 65cm. Below are specific details about the Honda Avancier: 1. Configuration: The Avancier is equipped with an ANC active noise cancellation system, a large-capacity sliding center console with dual-opening design for the front seats, and a rear central control system with audio control buttons. 2. Powertrain: It features two powertrain options - a 1.5T and a 2.0T engine. The mid-to-low trim models are equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 193Ps, maximum power of 142kW, peak torque of 243N.m, paired with a CVT continuously variable transmission. The high-end trim models come with a 2.0T direct-injection VTEC turbocharged engine, producing a maximum horsepower of 272Ps, maximum power of 200kW, peak torque of 370N.m, mated to a 9-speed automatic transmission.
18
3
Share

What type of fuel does the Mercedes-Benz B200 use?

Mercedes-Benz B200 uses 95 and 98 octane fuel. The actual fuel consumption of the 2020 Mercedes-Benz B200: The actual fuel consumption per 100 kilometers for the 2020 Mercedes-Benz B200 is 6.2 liters, which is relatively low. This engine has a small displacement and features cylinder deactivation for energy saving, making it a car with good fuel economy. Pros and cons of the Mercedes-Benz B200: The interior materials are of high quality, mainly soft and leather materials. In terms of driving quality, the steering wheel has no play, and the chassis is very stable. However, as an imported car, it offers guaranteed quality, though the suspension is on the stiff side, rear seat comfort is average, and the power is just adequate. Being a niche imported model with low ownership numbers, the maintenance costs in the long run are relatively high.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.