···
Log in / Register

What is the tire model of the Haval H2?

4 Answers
AdelineMarie
09/01/25 2:57am
Haval H2 is equipped with Giti brand tires, with the tire model being 235/55-R18. This tire is a high-performance SUV tire that balances handling, comfort, and safety. It utilizes a high-dispersion white carbon black nano-level formula material, effectively reducing rolling resistance during driving, ensuring wet road grip, and helping to lower fuel consumption. Below is an introduction to the Haval H2: 1. In terms of configuration, the Haval H2 Chuangxiang edition adds a voice control system. The vehicle also features a smart anti-pinch panoramic sunroof, 6-way adjustable driver's seat, multifunctional steering wheel, 8-inch central control screen, electronic gear shift, and electronic parking brake. 2. There are a total of 10 Haval H2 models currently on sale, all with a 1.5T engine displacement, and a choice between dual-clutch and manual transmissions. The engine has a maximum power of 110kW, maximum horsepower of 150PS, and maximum torque of 210N·m.
Was this review help?
17
4
Share
StRylee
09/13/25 5:53am
I've been driving a Haval H2 for several years, and the original tire size is 215/60 R17, which means the tire width is 215 millimeters, the aspect ratio is 60%, and the wheel diameter is 17 inches. Choosing the right size is crucial for daily driving, otherwise, the speedometer may be inaccurate, and it can also affect fuel consumption and handling. I've found that regular tire pressure checks can extend tire life, and generally, I consider replacing them after about 50,000 kilometers. When changing tires, don't skimp or take shortcuts; always go for genuine products to avoid brake system failures. In summer, slightly increase the tire pressure on hot roads to prevent blowouts, and in winter, switch to snow tires for better safety. Simple maintenance can save a lot of trouble.
Was this review help?
13
4
Share
Expand All
EdwardAnn
10/27/25 6:40am
As an ordinary car enthusiast, the standard tires on the Haval H2 are 215/60 R17, a design that balances comfort and grip. For daily driving, especially if you frequently hit the highway, I'd consider low-profile tires to enhance stability, but avoid randomly changing sizes to prevent ABS system warnings. For maintenance, rotating the tires every six months ensures even wear, saving money and improving efficiency. Opt for premium brands like Michelin or Pirelli for durability, or choose cost-effective domestic options if on a tight budget. Never overlook tire safety—replace them promptly when severely worn to avoid accidents.
Was this review help?
14
4
Share
Expand All
Mitch
12/10/25 6:56am
Checking the tire model of the Haval H2 is easy—just look at the sidewall where it's printed as 215/60 R17. This is the standard configuration, though there might be slight variations across different model years, so it's best to verify with the user manual. When replacing tires, don't skimp on quality; choose the right size to maintain handling balance, otherwise slipping may occur. I've changed tires several times, checking tread depth every 20,000 kilometers—replace them if it's below 2mm for safety and cost-effectiveness. Regular maintenance includes wheel balancing to avoid bumps, which extends tire lifespan.
Was this review help?
6
2
Share
Expand All
More Forum Discussions

What type of engine oil should be used for the Santana 1.6?

The Santana 1.6 uses 5W40 engine oil. The functions of engine oil include: lubrication and friction reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, and shock absorption. Taking the 2021 Santana as an example, it is a compact car with body dimensions of: length 4475mm, width 1706mm, height 1469mm, wheelbase of 2603mm, fuel tank capacity of 52.8 liters, and trunk capacity of 466 liters. The 2021 Santana is equipped with a 1.5L naturally aspirated engine, with a maximum horsepower of 112PS, maximum power of 82kW, maximum torque of 145Nm, and is paired with a 5-speed manual transmission.
8
2
Share

What are the methods to distinguish between good and bad batteries?

Methods to distinguish between good and bad batteries are: 1. Inspect the appearance: Check if the battery casing is bulging, leaking, has broken separators, or corroded terminals. If these signs are present, it indicates the battery is dead; 2. Test the voltage: After charging for two hours, measure the voltage of individual battery cells every 20 minutes. If the voltage is below 13, it indicates a problem. During discharge, test every 10 minutes in three intervals. If the discharge time is faster than other batteries and the voltage drops below 10V, the battery is faulty; 3. Check for water loss and blackening: After charging the battery for 36 hours, if the charger's red light remains on, it indicates severe water loss. Open the battery's top cover to reveal six round holes. Check the color of the electrolyte in each hole. If it appears black, it means the lead powder from the plates has fallen off, indicating the battery is dead.
17
3
Share

What Documents Are Required to Drive with Temporary License Plates?

Documents required to drive with temporary license plates include: the purchaser's ID card, vehicle purchase invoice, compulsory traffic insurance policy, and vehicle factory certificate. Temporary license plates can be categorized into: 1. Temporary plates for administrative jurisdiction areas; 2. Temporary plates for cross-administrative jurisdiction areas; 3. Temporary plates for testing purposes; 4. Temporary plates for special-type motor vehicles. Temporary license plates are paper motor vehicle plates that permit temporary road use, also known as temporary driving plates. Conditions for applying for temporary plates: 1. Driving the vehicle from the place of purchase to the place of use; 2. Vehicle transfer with official plates already surrendered; 3. New vehicles without official plates in the local area needing to travel elsewhere for modifications; 4. Purchasing a vehicle locally to drive elsewhere; 5. Needing temporary trial use before fixing vehicle registration.
18
5
Share

How to Use Car Air Conditioning Properly?

Car air conditioning should be used properly as follows: 1. Choose an appropriate temperature setting; 2. Do not immediately activate the internal circulation when entering the car in summer; 3. Avoid running the air conditioning for extended periods; 4. Do not adjust the air vent direction arbitrarily; 5. Use the air conditioning in a fully enclosed state; 6. Avoid resting or sleeping for long periods in a stationary car with the air conditioning on. The functions of car air conditioning are: 1. To adjust and control the temperature, humidity, air cleanliness, and airflow inside the cabin to an optimal state; 2. To provide a comfortable environment for passengers, reducing travel fatigue; 3. To create favorable working conditions for the driver, ensuring driving safety.
16
4
Share

What are the types of automotive body structures?

Automotive body structures are divided into: body-on-frame, semi-monocoque, and monocoque. Body-on-frame refers to a vehicle with a rigid frame, also known as a chassis frame, where the frame and body are flexibly connected via springs or rubber pads. The engine, part of the transmission system, and body assembly components are mounted on the frame via suspension systems. Monocoque refers to a structure where the front end, side panels, rear end, floor panel, engine, front and rear suspension, and part of the transmission system are assembled onto the body, with the body load transmitted to the wheels via the suspension system. Semi-monocoque body is where the body and frame are rigidly connected via bolts, rivets, or welding, with the body bearing part of the frame's load.
9
4
Share

Can I Install a Car License Plate Myself?

You can install a car license plate yourself. The installation method is as follows: 1. Take out the screws for the license plate and insert them into the anti-theft caps by rotating; 2. Position the license plate correctly, align the screws with the gaps on the bumper, and secure them using tools; 3. Cover the anti-theft caps and press them into place. The functions of a license plate are: 1. It serves as an identification mark for the vehicle; 2. It indicates the region to which the vehicle belongs; 3. The owner and registration information of the vehicle can be traced based on the license plate. The structure of a license plate consists of: 1. A Chinese character, which is the abbreviation of the province where the vehicle is registered; 2. An English letter, representing the prefecture-level city code of the vehicle's location; 3. A sequential number.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.