What is the tire model of the Great Wall M4?

1 Answers
McSimon
07/29/25 10:46am
The tire model of the Great Wall M4 is 205/60r16. 205/60r16 indicates that the tire width is 205mm, the aspect ratio is 60, 'r' represents radial tire, and 16 means the tire can be mounted on a 16-inch wheel rim. Tires are one of the important components of a vehicle, directly contacting the road surface and working together with the suspension system to cushion impacts during driving. The Great Wall M4 features MacPherson strut independent front suspension and longitudinal trailing arm semi-independent rear suspension. It is equipped with a 1.5L naturally aspirated engine delivering maximum power of 106PS (78kW) and peak torque of 138Nm, paired with a 6-speed sequential transmission.
Was this review help?
4
0
Share
More Forum Discussions

What to Do When Both Inside and Outside Door Locks of Haval H6 Won't Open?

There are many reasons why the Haval H6's door locks won't open from either inside or outside, primarily including the car being in a locked state, car key malfunction, car battery being dead, door sticking to the sealing rubber strip, or door lock deformation. Below are the corresponding solutions for each fault: 1. Car in a locked state: If the car is locked, not only the driver's door won't open, but all four doors and the trunk generally cannot be opened either. This situation is quite simple to handle; just unlock the car. 2. Car key malfunction: A faulty car key can prevent the door from unlocking. Key malfunctions include various situations, such as the car key being out of battery, buttons on the key being broken or unresponsive, or the key not being re-decoded after battery replacement. Specific situations require specific analysis. 3. Car battery dead: If the car battery is dead while the car is locked, the remote key won't open the door. In this case, charge the battery and use the mechanical key to open the door. 4. Door sticking to the sealing rubber strip: When the door sticks to the sealing rubber strip, applying more force when opening should do the trick. 5. Door lock deformation: If the car's door lock is deformed or damaged due to impact, it's necessary to visit a repair shop for professional repair or replacement.
5
1
Share

Can the car interior be decorated before license plate registration?

The interior cannot be decorated before license plate registration. The exterior appearance of the vehicle must match the photo, and the photo must be consistent with the content of the vehicle certification. The documents required for new car registration include: ID card, vehicle certification, triplicate car purchase invoice issued by the 4S store, the original and duplicate tax certificates obtained after paying the vehicle purchase tax, insurance policy, compulsory traffic insurance policy, and a temporary residence permit if the household registration is not local. Relevant information about license plates is as follows: 1. Notes for new car registration: You need to go to the vehicle management office to complete the registration, submit all required documents and pay the fees. The vehicle must also be driven to the vehicle management office for inspection. Some exempt vehicles only require an external inspection, which generally involves checking the engine number and chassis number. After the inspection, you can go to the vehicle management office hall to select a license plate. 2. The role of license plates: License plates are used for numbering and information registration of vehicles. Their main purpose is to identify the region to which the vehicle belongs, and the owner and registration information of the vehicle can also be traced based on the license plate.
3
4
Share

Why Does Car Fuel Consumption Increase in Summer?

The reasons for higher fuel consumption in summer are as follows: 1. Severe engine carbon deposits: Carbon deposits usually form on the fuel injector, spark plug, throttle valve, and combustion chamber. When carbon deposits reach a certain level, issues such as difficulty starting, stalling during neutral coasting or gear shifting, weak acceleration, and unstable idle speed (fluctuating high and low) may occur. 2. Use of inferior fuel: Inferior fuel contains more impurities and cannot be fully burned, so most of the gasoline is expelled from the vehicle. At the same time, a layer of white or reddish-brown substance forms on the surface of the oxygen sensor, leading to misjudgment of exhaust oxygen content measurement and transmission of incorrect data, ultimately resulting in poor control of the fuel injection ratio. 3. Excessive vehicle load: Some owners tend to place unnecessary items in the vehicle, which increases the weight. Others prefer to fill the fuel tank completely, which also adds to the vehicle's weight. The greater the vehicle load, the higher the pressure of the tires on the ground, and the greater the tire friction. 4. Use of high-power electrical devices in the vehicle: Especially at idle speed, since the engine speed is low, the electricity generated by the alternator is insufficient. When high-power electrical devices (such as air conditioning cooling or high-power audio systems) are used in the vehicle, they increase the burden on the engine and battery. Operating the vehicle under high load conditions also leads to increased fuel consumption.
14
3
Share

What are the differences between the V90 and V90CC?

The differences between the Volvo V90 and V90CC are as follows: 1. Appearance: The Volvo V90CC is essentially an updated version of the XC90, featuring all the iconic design elements, making it highly recognizable. The distinction between the V90 and V90CC lies in the fact that the V90CC has even higher recognizability, with a taller body that might seem bulky, but the V90CC manages to avoid this impression. 2. Configuration: The V90CC features leather wrapping on both the dashboard and doors, giving the interior a luxurious feel. Particularly noteworthy is Volvo's audio system. Equipping a station wagon with B&W speakers makes you feel like stepping into the car is like embarking on a poetic journey. The difference between the V90 and V90CC also includes the addition of a new air suspension system and active LED headlights. These configurations are indeed eye-catching. 3. Power: Another difference between the Volvo V90 and V90CC lies in their power systems. They are equipped with the Drive-ET5 turbocharged gasoline engine, a 2.0T four-cylinder engine delivering 254 horsepower and 350 Nm of torque, paired with an 8-speed automatic transmission. Additionally, they come with a full-time four-wheel-drive system, which is particularly beneficial during rainy and snowy conditions.
13
1
Share

How Often Should Sedans Undergo Inspection?

After the implementation of the new vehicle inspection regulations, sedans aged between 6 and 10 years must undergo inspection every 2 years. Specifically, vehicles are required to go through the inspection line at the 6th and 8th year marks. For private vehicles older than 10 years, the original inspection cycle still applies: vehicles aged between 10 and 15 years must be inspected once a year, while those over 15 years old require inspection every 6 months. Below is the process for vehicle inspection: 1. Exterior Inspection: The first step is the exterior inspection. Place the triangular warning sign on the roof, then sit in the car and turn on all the lights, step on the brake, and confirm everything is in order. After taking photos and signing, you can pass this step. 2. Emission Test: A tube is connected to the exhaust pipe, and the vehicle is driven to the specified speed. A tail gas analyzer is used to check if the emissions meet the standards. 3. Chassis, Brake, and Light Inspection: The brake inspection checks the effectiveness of the braking system and ensures balanced braking on both sides. The light inspection checks the height and intensity of the high beam. 4. Payment and Documentation: After paying the fee and waiting for the inspection report to be printed, submit the documents to the counter staff for review. If everything is in order, the inspection sticker is usually issued on the spot.
19
2
Share

Why was the 14th-generation Sylphy discontinued?

The reason for the discontinuation of the 14th-generation Sylphy is due to model updates and generational changes. As time progresses, people's preferences evolve, and the exterior design of the 14th-generation Sylphy no longer aligns with current consumer tastes, leading to its discontinuation. More details about the 14th-generation Sylphy are as follows: 1. The 14th-generation Sylphy adopts the brand's new V-Motion 2.0 design language; benefiting from Nissan's global CMF platform with a longer and wider chassis structure, it boasts a 1.254 luxury car width-to-height ratio, achieving an ultra-low drag coefficient of 0.26Cd. Additionally, its 1.5Gpa-UHSS high-rigidity body structure enhances driving safety. 2. Continuing the core comfort advantages of the Sylphy series, the 14th-generation Sylphy offers spacious seating for five and a high-quality, lightly luxurious interior, providing a delightful riding experience for the whole family. High-performance acoustic insulation technology and the Nissan Connect infotainment system deliver a relaxed and enjoyable driving environment. 3. The new 3rd-generation HR16 intelligent engine, equipped with four cutting-edge technologies, works in synergy with the active grille shutter system to reduce the 14th-generation Sylphy's combined fuel consumption to 4.9L per 100 kilometers.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.