What is the tire model of the Cadillac ATS-L?

1 Answers
MacJace
07/29/25 1:24pm
Cadillac ATS-L's tire models are 225/40R18 and 255/35R18, where 225 indicates the tire width is 225mm, 40 and 35 represent the aspect ratio of 40% and 35% respectively, R stands for radial tire, and 18 denotes the rim diameter of 18 inches. Taking the 2017 Cadillac ATS-L as an example, it belongs to the mid-size car category with body dimensions of: length 4730mm, width 1824mm, height 1426mm, wheelbase 2860mm, front track 1535mm, rear track 1578mm, minimum ground clearance 117mm, fuel tank capacity 62L, and trunk capacity 289L.
Was this review help?
16
0
Share
More Forum Discussions

Which province does the license plate with 'Ji' belong to?

Ji is the license plate of Shijiazhuang City, Hebei Province. Ji is the abbreviation for Hebei Province, hence all vehicle license plates in Hebei Province start with the character 'Ji', with license plate codes ranging from JiA to JiT. Hebei Province is a provincial-level administrative region of the People's Republic of China, with its capital in Shijiazhuang. More information about vehicle license plates is as follows: 1. License plates serve as identification and information registration for vehicles, their primary function being to identify the region to which the vehicle belongs, and to trace the owner and registration details of the vehicle based on the plate. 2. License plates, commonly known as vehicle tags, refer to the plates mounted on the front and rear of a vehicle, typically made of aluminum, sheet metal, plastic, or paper, inscribed with the vehicle's registration number, registration region, or other relevant information.
20
1
Share

Why Does the Alarm Sound When Opening the Car Door?

The reason the alarm sounds when opening the car door may be that the car lights were not turned off, or the small lights are in the on state. Simply turning on the "AUTO" automatic lights or turning off the lights can resolve this issue. Another possibility is that the car was locked using the remote control, and then the door was opened with a mechanical key, which may also trigger the alarm when opening the door. Generally, turning on the power will stop the alarm. More details are as follows: 1. The "AUTO" labeled buttons or switches on cars are not limited to automatic headlights; the air conditioning control panel or other locations may also have "AUTO" switches or buttons. 2. In German and American cars, the light control adjustment area is usually located on the lower left side of the steering wheel, while in Japanese and Korean models, as well as domestic models, the light controls are generally concentrated on the turn signal lever.
10
0
Share

How to Determine a Car's Production Date from Its Glass

The method to determine a car's production date from its glass is as follows: 1. First, the number represents the production year of the glass, indicating the last digit of the production year. If the vehicle's manufacturing date is in 2007 or 2008, then the glass year number 8 should represent 2008. The difference between the glass and the vehicle's production date will not exceed 10 years. 2. The small black dots indicate the production month of the glass. If you carefully observe the glass of other vehicles, you will notice that some glasses have the black dots in front of the number, while others have them behind the number. 3. If the black dots are in front of the number, subtract the number of dots from 7; if the black dots are behind the number, subtract the number of dots from 13. The result will be the production month of the glass.
12
3
Share

Reasons for Brake Disc Noise

Brake disc noise is generally caused by insufficient tension in the brake return spring, excessively hard brake pad material, or the brake pads being installed too close to the brake disc. Here are some introductions about brakes: 1. Currently, there are disc brakes and drum brakes. Many older vehicles often feature front disc and rear drum configurations. 2. Many modern vehicles use disc brakes on both front and rear wheels because disc brakes have better heat dissipation than drum brakes. During high-speed braking, they are less prone to thermal fade, resulting in better high-speed braking performance. 3. Disc brakes have inferior braking performance compared to drum brakes during low-speed cold braking, and they are more expensive than drum brakes.
13
1
Share

What is the name of the glass at the front of the car?

The glass at the front of the car is called the windshield, also known as the front windshield. As the name suggests, its main function is to block the wind that blows towards the driver while driving. Here is some relevant information about windshields: 1. Initially, windshields were designed to be upright. However, during use, people found that this installation method increased the car's resistance and was not aesthetically pleasing. Therefore, later car windshields were installed at an angle to reduce resistance, which in turn helps to decrease fuel consumption. 2. The windshields of large trucks still maintain an upright design because the weight of large trucks is significant, making this resistance negligible for them. Modern windshields are mostly made of tempered glass, which has high strength and is generally not easy to break.
10
5
Share

What Types of Transmissions Do Cars Have?

Automobile transmissions can be classified into Hydraulic Automatic Transmission (AT), Continuously Variable Transmission (CVT), Automated Manual Transmission (AMT), and Dual-Clutch Transmission (DSG). The details are as follows: 1. AT consists of a torque converter, planetary gears, and a hydraulic control system, achieving variable speed and torque through hydraulic transmission and gear combinations. The torque converter is the most critical component, comprising a pump wheel, turbine, and guide wheel, which functions to transmit torque and act as a clutch. 2. Compared to AT, CVT eliminates the complex and bulky gear combination transmission, instead using two sets of pulleys. Speed variation is achieved by altering the contact radius of the belt between the driving and driven pulleys. Since gear transmission is omitted, the transmission ratio can be freely adjusted, resulting in smoother shifting without sudden gear jumps. 3. AMT, like AT, is a stepped automatic transmission. Based on a conventional manual transmission, it incorporates a microprocessor-controlled electric device that replaces the manual operations of clutch engagement/disengagement, gear selection, and shifting, enabling automatic gear changes. 4. DSG transmissions are distinctly different from traditional automatic transmissions, as DSG does not use a hydraulic torque converter from the outset. This transmission is not produced based on the conventional automatic transmission concept. The engineers who designed DSG embarked on an innovative technological path, ingeniously combining the flexibility of manual transmissions with the convenience of traditional automatic transmissions.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.