···
Log in / Register

What is the tire model of the Baojun 630?

6Answers
LaElias
07/29/2025, 08:18:19 AM

The tire model of the Baojun 630 is 195/60R15. The first number, 195, represents the tire width of 195MM. The 60 indicates that the tire's aspect ratio is 60%, meaning the section height is 60% of the width. The letter R stands for radial tire, and 15 represents the rim diameter of 15 inches. The Baojun 630 has a top speed of 175km/h and a fuel consumption of 8.5L per 100 kilometers. In addition to the model, the tire also displays the following common data: Tire cord material: Represented by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Commonly used speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: Indicates the rim specification compatible with the tire for practical use, such as standard rim 5.00F.

Was this review help?
119
Share
OAlex
08/13/2025, 06:57:13 PM

I just bought a used Baojun 630, and when checking the tires, I found that most models are either 195/60 R15 or 185/65 R15, depending on the specific year and configuration. I recommend you check the numerical sequence on the tire sidewall directly for confirmation. The first digit of the tire model is the width of 195mm, the second digit is the aspect ratio of 60%, and R15 is the rim diameter. If you often drive in the city, the 195/60 R15 offers good grip, but you need to be cautious on wet roads during winter rains. When replacing, try to choose the original size to avoid affecting the suspension and fuel consumption. Regular tire pressure checks are also essential—I make it a habit to use a tire pressure gauge monthly to ensure it stays within the 2.3-2.5 bar range.

Was this review help?
1
Share
Expand All
SamuelLee
10/08/2025, 10:53:55 PM

As a long-term car repair professional, the common tire size for the Baojun 630 is mostly 195/60 R15. The 195 represents the tread width in millimeters, 60 is the aspect ratio percentage, and R15 indicates the wheel diameter in inches. This size, paired with 15-inch rims, is suitable for daily driving. When replacing tires, prioritize brands like Michelin or Goodyear for their durability and wear resistance. If the size does not match, it can affect suspension stability or increase fuel consumption. I recommend regularly checking for tire wear and cracks, and rotating the tires every 8,000 kilometers to extend their lifespan. Ensure a tread depth of at least 3mm when driving in rainy conditions to prevent hydroplaning.

Was this review help?
9
Share
Expand All
DelJake
11/21/2025, 11:09:20 PM

My Baojun 630 has been running for five years with the original tires sized at 185/65 R15. The number 185 indicates the width, 65 represents the aspect ratio height, and R15 refers to the wheel rim size. Mismatched models may cause vibrations or handling issues, so I always ask the mechanic to check tire pressure and balance during maintenance. This size performs steadily in urban commuting with quick braking response, though tire noise is slightly louder on long trips, so I recommend choosing products with noise-reduction design. Regularly clean the tires to prevent dirt buildup that leads to aging. Safety comes first when driving, so replace them promptly when the tread wears shallow.

Was this review help?
11
Share
Expand All
MacRichard
01/12/2026, 12:45:22 AM

I'm a car modification enthusiast. The Baojun 630 usually comes with 195/60 R15 tires, but if you want to upgrade, for example, to 205/55 R16, it can enhance the appearance. However, you need to ensure it doesn't affect the speedometer or the chassis load. The original tire model is easy to find in physical stores, but pay attention to the production date when purchasing to avoid old stock. If the size difference is too large, it might rub against the fender, so it's advisable to consult a professional shop first to measure feasibility. I also enjoy testing different brands, such as Bridgestone's durable models which are suitable for long-distance driving. In maintenance, regular balancing and alignment are essential to prevent uneven wear.

Was this review help?
3
Share
Expand All
MilaAnn
04/08/2026, 04:36:54 AM

As an ordinary car owner looking to save money on maintaining the Baojun 630, the first choice for tires is 195/60 R15. Using a mismatched model will increase replacement costs and risks. Simply check the numbers on your tire's sidewall to confirm. The 185/65 R15 is also common but slightly narrower. Purchasing during discount periods from well-known brands can save you dozens of yuan. It's recommended to check tire pressure quarterly and keep it at the recommended value. Incorrect tire models can lead to increased fuel consumption or unstable handling, especially during sharp turns where safety comes first. Use tools to check tread depth yourself and rotate tire positions annually to extend service life and prevent accidents.

Was this review help?
8
Share
Expand All
More Q&A

How to Adjust the Brightness of Vios Dashboard Lights?

Vios dashboard lights cannot have their brightness adjusted. Dashboard lights are functional lamps used to indicate vehicle performance, and they are divided into three main categories: general indicator lights, warning indicator lights, and fault indicator lights. The reasons why dashboard lights cannot be turned off and their solutions are as follows: 1. Automatic illumination: If the dashboard lights remain on after closing the car door, this is one of the car's functions, and they will turn off after locking the car; 2. Non-automatic illumination: The dashboard lights change with the headlight switch. When the headlights are turned off, the dashboard lights will naturally turn off; 3. Fault lights: A component inside the car, such as the engine, oil, brake system, or coolant temperature, may be faulty. These require troubleshooting and the use of a diagnostic tool to clear the fault codes before the lights will turn off; 4. Indicator lights: These remind you that the car door, front hood, or rear hood is not properly closed. Simply address the relevant components as indicated by the lights.
104
Share

How much engine oil is needed for the Magotan 1.8T?

The Magotan 1.8T requires approximately 4.5 liters of engine oil. Below are the specific functions of engine oil: 1. Shock absorption and buffering: When the pressure in the engine cylinder rises sharply, it suddenly increases the load on the piston, piston pin, connecting rod, and crankshaft bearings. This load is transmitted and lubricated through the bearings, providing a cushioning effect against the impact load. 2. Rust and corrosion prevention: The lubricating oil adheres to the surface of parts, preventing contact with water, air, acidic substances, and harmful gases. 3. Lubrication and wear reduction: There is rapid relative sliding between the piston and cylinder, as well as between the main shaft and bearing shells. To prevent excessive wear, an oil film of sufficient thickness must be established between the two sliding surfaces, separating the relatively sliding parts to reduce wear. 4. Cooling: The engine oil carries heat back to the oil tank, which is then dissipated into the air, assisting the radiator in cooling the engine.
115
Share

What to Do When a BMW Burns Engine Oil?

BMW burning engine oil is a common issue, and there are many reasons for it. However, given BMW's quality, the likelihood of engine oil burning due to engine quality problems is extremely low. The main causes are the corrosion and aging of valve seals, crankshaft seals, and the seals between the turbocharger and intake duct. Below are the reasons and solutions: 1. Since seals are rubber products, they tend to age over time. Combined with the high temperature and pressure inside the engine, seals age even faster, reducing their sealing ability. This makes it easy for engine oil to seep into the cylinders and participate in combustion. However, if the issue is with the valve seals, the problem is not severe. Blue smoke will only appear during cold starts and disappear once the engine warms up. In this case, it is necessary to visit a professional repair shop or a 4S store to replace the seals with new ones. 2. In addition to replacing the seals, using engine oil with better high-temperature performance and heat dissipation capabilities can provide better heat dissipation and lubrication for the engine internals, helping to prevent premature aging of the seals. Furthermore, all cases of engine oil burning are related to wear and tear, which is natural consumption. Regular and proper maintenance can minimize this consumption.
108
Share

What causes the clicking sound when starting with auto hold?

When starting with auto hold, the change in the vehicle's pitch attitude causes the friction pads and brake discs to creep or have a tendency to creep, resulting in a "creaking" sound, rather than the sound produced by the engagement of the internal clutch in the transmission. Here is the relevant information: 1. Auto Hold: When auto hold is activated and encountering a traffic light intersection, the driver steps on the brake pedal to stop, and the transmission is in the N (neutral) state (clutch disengaged). The driver lightly presses the accelerator, and the transmission shifts from N to D (drive), with the clutch engaging to provide power output before automatically releasing. This sound has no impact on the vehicle's functionality or lifespan, nor does it affect performance, so please use it with confidence. 2. Function: Auto Hold (AUTO-HOLD) is an extension of the Electronic Stability Program (ESP) functionality, which controls the braking of all four wheels through the ESP system.
113
Share

Why can the Lynk & Co 06 use 92-octane gasoline?

The octane rating of gasoline required is related to the engine's compression ratio. The 06 model uses a lower-end engine, so it naturally uses 92-octane gasoline. Below is some relevant information about the Lynk & Co 06: 1. Exterior: The front grille features a blackened mesh design with split-type headlights. The daytime running lights and turn signals are positioned above the engine, while the main lighting headlights are distributed on both sides of the grille, paired with a prominent black front lip and air deflector slots on both sides, giving the front face a highly sporty appearance. 2. Interior: The steering wheel adopts a flat-bottom sporty design, and the T-shaped center console area resembles the style of the Lynk & Co 05. The top section features a large LCD screen, below which are the air vents, followed by the air conditioning control area with two knobs for adjusting temperature and airflow, while other modes are touch-controlled. 3. Powertrain: The engine is a three-cylinder 1.5T with a maximum power output of 130 kW and a peak torque of 265 Nm.
120
Share

How to Read the Oil Dipstick in a Volkswagen?

How to read the oil dipstick in a Volkswagen: When checking the oil dipstick, the car should be parked on a level surface. Generally, as long as the oil level is between the upper and lower limits, it is considered normal. If the oil level exceeds the upper limit, it can increase the resistance of the engine crankshaft and lead to more carbon deposits. Conversely, if the oil level is below the lower limit, it can cause engine cylinder scuffing or bearing damage. Below are some relevant details: 1. The oil dipstick is usually located near the engine. Open the front hood, and you will find a yellow pull ring on the left side of the engine—that is the oil dipstick. Essentially, it is a common measuring tool used to check the static oil level height, indicating whether the engine oil level is within the reasonable range (between the upper and lower limits). 2. The oil dipstick is typically located near the engine and has a distinctive feature—a pull ring. You can pull it out by firmly tugging the ring. However, you cannot check the oil level immediately because the dipstick may have oil residue on it. Use a clean tissue to wipe it off, then reinsert it. After pulling it out a second time, you can check the oil level on the dipstick.
104
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.