···
Log in / Register

What is the tire model of the BAIC Huansu S3?

4 Answers
AdelineFitz
07/29/25 4:34pm

The tire model of the BAIC Huansu S3 is 205/65R16, equipped with 16-inch double five-spoke aluminum alloy wheels. The vehicle is powered by a BJ415C engine with a maximum power of 83kW and a maximum torque of 150Nm, paired with a 5-speed manual transmission. The BAIC Huansu S3 is a 7-seater compact SUV under BAIC Yinxiang Automobile Co., Ltd. Its body dimensions are 4380mm in length, 1730mm in width, and 1760mm in height, with a wheelbase of 2685mm. The top speed is 160km/h, and the minimum ground clearance is 200mm.

Was this review help?
17
0
Share
RuthFitz
08/14/25 5:47am

The tire model of my BAIC Huansu S3 is 205/65 R16, which is the original factory configuration of this car. It's quite suitable for daily driving, providing a smooth and fuel-efficient ride. When I used to drive in the city, the tire grip was pretty good, but on bumpy rural roads, it occasionally felt a bit rough. I recommend checking the tire pressure regularly. I usually maintain it between 2.3 to 2.5 bar—too high and it's prone to blowouts, too low and fuel consumption increases. Also, keep an eye on tire wear. Check the tread depth every six months or so; if it's below 1.6 mm, it's time for a replacement. Last time I changed my tires, it cost me less than 1,000 yuan, and sticking to the same model ensures safety and peace of mind. Remember, small tire issues can lead to major accidents, so don’t slack on maintenance.

Was this review help?
12
4
Share
Expand All
OscarDella
10/12/25 8:32am

The original tire model for the BAIC Huansu S3 is generally 205/65 R16, a size I've seen quite often, and it's quite reliable to drive. Let me briefly explain: 205 refers to the tire width in millimeters, 65 is the aspect ratio indicating the height proportion, and R16 is the wheel diameter in inches. This design offers a balanced performance in urban road conditions, with stable acceleration and fuel efficiency, though its handling is slightly weaker on mountain roads. I usually pay attention to tire pressure maintenance, keeping it around the recommended value of 2.3 bar—too high reduces comfort, while too low wastes fuel. Tire aging is an issue that shouldn't be overlooked; it's advisable to have a professional inspection every 10,000 kilometers to ensure safety and peace of mind.

Was this review help?
11
4
Share
Expand All
CooperLynn
11/26/25 2:46am

Based on the information I know, the tire specification for the BAIC Huansu S3 is 205/65 R16. This parameter can be simply understood as a width of 205 millimeters, an aspect ratio of 65%, and a 16-inch wheel rim. Choosing matching tires is crucial as it affects handling and fuel consumption. For maintenance, it's important to regularly check tire pressure and wear conditions. I recommend a visual inspection every month, and if there are any cracks or foreign objects, they should be addressed promptly. Safe driving relies on these small details, so don't wait until a tire blows out to regret it.

Was this review help?
6
3
Share
Expand All
More Forum Discussions

Why is there ghosting on the car's front windshield film?

Ghosting on the car's front windshield film may be caused by poor film quality or improper installation. Here are some precautions for car window tinting: 1. Avoid washing the car: Try to avoid washing the car within three days after tinting to prevent the film from peeling off due to moisture. Also, refrain from using the rear window defroster for a week, as moisture can adversely affect the defroster lines. After installation, you can gently wipe the film surface with a wet towel, sponge, or soft cloth. Additionally, you may notice a hazy appearance caused by water vapor inside the film during the drying process, which is normal and will gradually disappear. 2. Avoid rolling windows up and down: For the first week after tinting, try to avoid rolling the windows up and down (especially for newly tinted cars). It takes 5-7 days for the film to firmly adhere to the window. During this period, the edges of the film can easily curl or shift when the windows are operated. 3. Be careful when cleaning: If stains appear on the film, avoid using chemical solvents. Instead, use a damp cleaning towel, water-soaked paper towels, a cloth with mild detergent, or a rubber squeegee for cleaning. Avoid using abrasive materials or tools that could scratch or damage the film to protect the window tint.
3
4
Share

Can you introduce the interior functions of the 2021 Sagitar?

2021 Sagitar interior functions brief introduction: 1. Central control buttons: (1) sync: Dual-zone air conditioning switch. Models equipped with this feature allow separate temperature control for driver and front passenger. (2) Electronic Stability Program (ESP): Enabled by default. Manual deactivation is generally not recommended. This system effectively prevents loss of vehicle control during extreme driving conditions. (3) Hazard warning lights (commonly known as emergency flashers): Serve as warning signals for emergency or special situations. (4) Volume control buttons: In addition to normal knob adjustment, left/right tilting can switch tracks. (5) Parking radar/camera: Alerts drivers to surrounding obstacles through visual display and warning sounds. (7) Auto Hold: At traffic lights, the vehicle won't roll away after releasing the brake pedal. The wheels unlock when the accelerator is pressed, allowing the vehicle to proceed. 2. Door buttons: On the driver's door of the Volkswagen T-Cross: Rear window lock button, one-touch up/down window controls for all four doors, and exterior mirror adjustment switches (for angle adjustment, heating function, etc.). 3. Roof buttons: Mainly lighting controls: Welcome lights, driver reading light, front passenger reading light, interior light switch, and sunroof switch.
15
5
Share

What lights to use when turning at an intersection without traffic signals?

At intersections without traffic signals, use the following lighting: Use high and low beams: When passing through an intersection without traffic signals, alternate between high and low beams at least twice. Pay attention to traffic: Slow down in advance and alternately use high and low beams to signal, while closely monitoring the traffic situation ahead. Information about traffic signals is as follows: Road traffic signals: They are a category of traffic safety products, serving as an important tool to strengthen road traffic management, reduce traffic accidents, improve road efficiency, and enhance traffic conditions. Applicable to: Crossroads, T-junctions, and other intersections, controlled by road traffic signal controllers to guide vehicles and pedestrians to pass safely and orderly.
8
1
Share

Is the stationary vehicle at fault in a side-swipe collision on a narrow road?

Determining whether a stationary vehicle is at fault in a side-swipe collision on a narrow road is as follows: No fault: If the vehicle had already stopped during the encounter and was still sideswiped, the other party bears full or primary responsibility when one party is not at fault. Illegal parking: If the vehicle was parked in the wrong direction (against traffic) and was sideswiped during the encounter, then the owner of the wrong-way vehicle is at fault. Information about oncoming traffic is as follows: Oncoming traffic: A traffic term referring to vehicles or trains traveling in opposite directions passing each other at a certain point. Note: Prepare in advance when encountering oncoming traffic to avoid psychological panic and operational confusion.
12
0
Share

At what water depth will the engine be flooded?

When the water depth reaches the following conditions, the engine may be flooded: Sedans: For most sedans, when the water level exceeds 20 centimeters, there is a risk of engine flooding. SUVs: For SUVs with higher ground clearance, the risk of engine flooding occurs when the water depth exceeds 30 centimeters. The consequences of engine flooding are as follows: Engine connecting rod deformation: This leads to shortened piston stroke, preventing gases from being fully compressed. Piston leakage: The piston rings lose elasticity or fail to seal properly, causing gas leakage and compressed gases to enter the crankcase. Poor sealing: When the intake and exhaust valves do not close tightly, compressed gases leak into the intake manifold and exhaust manifold.
16
4
Share

Which Mercedes-Benz model has the cheapest frameless doors?

Mercedes-Benz's most affordable model with frameless doors is the CLA-Class. Here's an extended introduction about the Mercedes-Benz CLA-Class: 1. Origin: The Mercedes-Benz CLA is the brand's first four-door coupe developed based on a compact car chassis. Recognizing the market demand for four-door coupe models, Mercedes-Benz extended its smooth and elegant roofline further downward, launching the all-new CLA to tap into the potential market of young consumers. 2. Performance: The Mercedes-Benz CLA is built on the same MFA platform as the new A-Class, featuring a stylish and dynamic exterior design. The front end largely mirrors the A-Class, but the enlarged lower air intake gives it a visually striking appearance. Additionally, the streamlined body combined with the rounded rear creates a harmonious look, achieving an impressive drag coefficient of 0.23. 3. Exterior: The front fascia adopts a sporty and aggressive design, with a vertical-slat grille, sharp and fierce headlights, distinctive LED daytime running lights, dynamic air intakes on both sides, and a sporty front bumper. The low-slung profile gives it an impactful stance, with smooth and flowing roofline and window lines, sleek black mirrors, sharply contoured door panels, and stylish alloy wheels. The rear features a youthful and sporty design, with a sporty spoiler, refined and unique taillights, and a quad-exhaust setup.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.