What is the tire model of the Adventurer?

1 Answers
TimothyMarie
07/30/25 3:50am
The Adventurer has three tire sizes: 225/60R18, 225/55R19, and 245/45R20. The first number 225 represents the tire width of 225MM, 60 indicates the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width. The letter R stands for radial tire, and 18 denotes the rim diameter of 18 inches. The Adventurer has a top speed of 215km/h and a fuel consumption of 7.5L per 100km. In addition to the model, tires are also marked with the following common data: Tire cord material: Represented by Chinese Pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire for practical use, such as 'Standard Rim 5.00F'.
Was this review help?
14
1
Share
More Forum Discussions

What to Do If Your Car Gets Flooded?

If the engine is damaged, you should contact a towing company to have the car transported to an auto repair shop for handling. After the car has been flooded, the computer board and wiring harness must be thoroughly cleaned. The floor mats must be removed, and all water inside the car body must be dealt with. In fact, it's best to file an insurance claim in such situations. For instance, if the engine is damaged due to flooding or secondary startup, you will need flood insurance coverage.
15
2
Share

How to Remove the Volkswagen Jetta Power Window Switch?

Open the car door where the switch needs to be replaced, and observe the seam between the trim panel and the door panel to locate the gap. Insert a pry tool or a flat tool into the gap to lift the trim panel, then slowly remove the trim panel along the seam. Lift the trim panel and unplug the connector of the power window switch. Unscrew the screws to remove the power window switch.
1
0
Share

What to Do When a Ford Fiesta Won't Shift Gears?

For manual transmission cars, the inability to shift gears is because the clutch is not fully depressed. Simply press the clutch pedal down. For automatic transmission cars, the inability to shift gears occurs when the vehicle is not completely stopped before shifting into the P (Park) position. In this case, try shifting gears again.
20
3
Share

How to Steer When Reversing into a Parking Space Exceeds 30 Centimeters?

The distance between the car body and the left parking line should be approximately 1.5-1.8 meters, and the car body should remain parallel to the left parking line. When observing that the lower edge of the left rearview mirror aligns with the yellow line, quickly turn the steering wheel fully to the right. When both front wheels cross the starting line, press the clutch and brake to stop.
5
4
Share

Is the Santana from SAIC Volkswagen or FAW-Volkswagen?

The Santana is from SAIC Volkswagen. Taking the 2021 Santana as an example, it is a compact car with body dimensions of: length 4475mm, width 1706mm, height 1469mm, wheelbase 2603mm, fuel tank capacity 52.8L, and curb weight 1120kg. The 2021 Santana features a front McPherson independent suspension and a rear compound torsion beam non-independent suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 112PS, maximum power of 82kW, and maximum torque of 145Nm, paired with a 5-speed manual transmission.
14
5
Share

How does vehicle insurance claims work?

Inspectors complete on-site investigation and inspection within 1 working day after receiving notification from the insurance company's back-office staff. The back-office staff of the business department and various insurance branch companies review the claim documents submitted by customers. The claims processor in the claims verification department reviews the materials submitted by the back-office staff and signs for receipt in the handover log if all document procedures are complete. The claims processor assigns a number to the claim case that has completed the approval process and submits the payment receipt and calculation sheet to the finance department for fund transfer.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.