···
Log in / Register

What is the tire model of the 2016 Roewe RX5?

3 Answers
MacHannah
07/29/25 11:03pm
2016 Roewe RX5 model is 205/55R16. The first number 205 represents the tire width of 205MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, the letter R stands for radial tire, and 16 denotes the rim diameter of 16 inches. The 2016 Roewe RX5 has a fuel consumption of 5.9L per 100 kilometers. In addition to the model, the tire also displays the following common data: Tire cord material: Represented by Chinese Pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Shows the rim specification compatible with the tire for practical use, such as 'Standard Rim 5.00F'.
Was this review help?
20
3
Share
Gomez
08/16/25 12:59am
I remember the 2016 Roewe RX5 originally came with tires sized 215/60 R17 as standard for the base model, while some higher trim versions used 235/50 R18. I found this information on the label inside the driver's door frame of my same model car—that label usually lists the full specifications. The number 215 represents the width in millimeters, 60 is the aspect ratio, and R17 indicates the rim diameter. After driving this car for over a year, the tire durability has been decent, but it's important to check them regularly because faster wear can affect braking distance. Especially in rainy conditions when roads are slippery, if the tread is worn down by more than half, they should be replaced; otherwise, the car may feel unstable or skid at high speeds. I recommend taking a photo of the label information after buying the car to avoid confusion about the model later. When replacing tires, don’t go for the cheapest option—choose an authorized shop to match the original size, ensuring driving safety and stable fuel consumption. Otherwise, a significant size mismatch may cause misalignment or sluggish acceleration.
Was this review help?
10
2
Share
Expand All
DelBenjamin
10/18/25 6:30am
When it comes to the tires of the 2016 Roewe RX5, the common factory specifications are 215/60 R17. Simply put, the size means 215mm width, 60% aspect ratio, and 17-inch rims. This configuration balances comfort and fuel efficiency, providing a relatively smooth ride on urban roads. When replacing tires, don’t overlook the load index and speed rating, typically 91H or 92V, which match the original design for safe handling. In my work, I frequently deal with automotive parts and have noticed significant performance differences between brands. For example, Michelin offers strong grip but is more expensive, while domestic brands like Linglong are more affordable and wear-resistant. Tire maintenance is crucial—check the pressure weekly against the standard value, with 220-240 kPa recommended for cold tires. Avoid arbitrary size modifications, as changing the rims can affect instrument accuracy and insurance claims. Drive steadily to minimize the risk of blowouts.
Was this review help?
10
5
Share
Expand All
More Forum Discussions

Is Wheel Alignment Necessary After Changing Tires?

Wheel alignment is not necessary after changing tires; only wheel balancing is required. Situations that do require wheel alignment include: 1. When the vehicle's steering wheel feels heavy, shakes, pulls to one side, is off-center, or doesn't return to position while driving; 2. Uneven tire pressure and tread wear; 3. Wheel vibration or wobbling; 4. The vehicle pulling to one side. The benefits of wheel alignment are: 1. Enhanced driving comfort; 2. Extended tire lifespan; 3. Improved straight-line stability; 4. Reduced wear on chassis suspension components; 5. Increased driving safety. The principle behind wheel alignment is to adjust the vehicle's four-wheel parameters to ensure optimal driving performance and reliability.
3
5
Share

What are the handling methods for a tire blowout on the highway?

Highway tire blowout handling methods are: 1. Maintain control of the steering wheel and gradually reduce speed; 2. Gradually move the vehicle to the right and stop; 3. Quickly place a warning triangle 100 meters behind the vehicle; 4. Replace with the spare tire and promptly exit the highway. Causes of tire blowouts include: 1. Tire leakage; 2. Excessive tire pressure; 3. Insufficient tire pressure; 4. Severe tire wear. Tire maintenance methods include: 1. Regularly remove debris from tire treads; 2. Periodically check tire pressure; 3. Inspect tire wear and replace when necessary; 4. Promptly repair punctures; 5. Immediately stop and check tire condition if abnormal tire conditions occur while driving.
14
0
Share

What causes abnormal engine noise after an oil change?

The reasons for abnormal engine noise after an oil change are: 1. Overfilling of engine oil; 2. Using oil with inappropriate viscosity. The procedure for changing engine oil is: 1. Start the engine to warm up and bring the transmission to operating temperature; 2. Remove the drain bolt to collect the old oil from the transmission; 3. After draining the old oil completely, remove the oil pan to replace the transmission filter; 4. Reinstall the oil pan and tighten the drain plug; 5. Add new transmission oil; 6. Start the vehicle and shift through all gears; 7. Check the automatic transmission fluid level and adjust if necessary. Precautions for oil change include: 1. Perform the change when the engine is warm to ensure complete drainage of old oil; 2. Add the correct amount of new oil; 3. After adding oil, start the engine to check for leaks, then run the engine for 3 minutes to confirm the oil level reaches the normal mark.
3
5
Share

What is the car depreciation rate?

Car depreciation rates are typically 11% for the first 3 years, 10% from the 4th year onward, and 9% for the subsequent 3 years. Below are the specific details about car depreciation rates: 1. Regulations: The depreciation rate is 11% for the first 3 years, 10% from the 4th year onward, and 9% for the subsequent 3 years. For the first 3 years, the annual depreciation rate is 11%, resulting in a total depreciation of 33% over 3 years. From the 4th year onward, the annual depreciation rate is 10%, leading to a total depreciation of 40%. For the subsequent 3 years, the annual depreciation rate is 9%, resulting in a total depreciation of 27%. According to tax regulations, the depreciation period for passenger cars is 5 years, with a residual value rate of 5%. 2. Impact: The higher the depreciation rate, the worse the vehicle's condition and the lower its residual value.
17
5
Share

What is Section Speed Measurement?

Section speed measurement refers to a method of detecting the average speed of motor vehicles passing through a road section (speed measurement section) between two adjacent speed monitoring points. Functions of the section speed measurement system: By setting up two cameras at two adjacent monitoring points on the same road section, a monitoring and snapshot system is established. This system conducts real-time monitoring and snapshots of vehicles passing through the checkpoint area twice to obtain information such as vehicle speed, traffic flow, license plate number, color, approximate physical dimensions, and driver characteristics. The collected information is then transmitted through a network to the database of the public security traffic command center and traffic control sub-center for data storage, query, comparison, and other processing. Advantages of section speed measurement: High measurement accuracy, stable and reliable speed detection, more comprehensive recorded data. Due to detector limitations, single-point checkpoint devices cannot guarantee 100% image capture of passing vehicles. It offers high measurement efficiency and diverse speed measurement capabilities.
4
1
Share

What is the real reputation of the Haval M6 Plus?

Haval M6 Plus is a car with strong overall performance and balanced capabilities, without any obvious shortcomings. Here is a detailed introduction to the Haval M6 Plus: 1. Largest in-class space: If comparable models are like one-bedroom apartments, then the Haval M6 is a two-bedroom apartment. This analogy is not an exaggeration. Due to adopting the chassis of the first-generation H6, the M6 has a body length of 4664 mm, which is generally more than 12 cm longer than comparable models. 2. Luxurious configurations: Equipped with a wet dual-clutch transmission and double-wishbone independent suspension. It also features practical configurations such as tire pressure display, 360-degree panoramic imaging, auto hold, hill start assist, hill descent control, keyless entry, steering wheel-mounted paddle shifters, and OTA upgrades.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.