What is the tire model of the 2014 Nissan Sunny?

Where to Add Coolant in a BMW?

Open the hood, and you will find a black reservoir on the left side of the engine. Open the cap of the reservoir to add coolant. Here is some relevant information: 1. The full name of coolant is antifreeze coolant, which has antifreeze functionality. Coolant is not only used in winter but also throughout the year. Whether it's cold or hot, a car cannot function without coolant. Proper use of coolant not only protects the engine's cooling system and improves heat dissipation but also enhances engine efficiency and extends its lifespan. 2. Be careful not to mix different types of antifreeze. Different types of antifreeze have varying freezing points due to their different compositions, so it's important to choose based on the temperature conditions of the vehicle's operating environment. Generally, the freezing point of the selected antifreeze should be 10-15°C lower than the local minimum temperature to prevent the antifreeze from losing its antifreeze function.

12

4

Share

How to Replace the Battery in a Lavida Car Key?

The method for replacing the battery in the new Lavida key is as follows: 1. There are two screws on the back cover of the car key. Use a screwdriver to remove each screw, then open the back cover to see the battery panel. Remove the old battery, install the new battery, then reattach the back cover and tighten the screws. 2. The Lavida is a sedan produced by Shanghai Volkswagen, with body dimensions of 4670 mm in length, 1806 mm in width, and 1474 mm in height, and a wheelbase of 2688 mm. The new Lavida features front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam non-independent suspension, and a body structure of unibody construction.

2

1

Share

How to Check the Tire Pressure Monitoring on Trumpchi GM8?

The tire pressure monitoring switch for the Trumpchi GM8 is located on the steering wheel. Press the page-turning button to display the tire pressure information. The tire pressure monitoring function can monitor the tire pressure and temperature of each tire in real-time and will alert the driver promptly when any abnormalities are detected, allowing timely action to prevent accidents. Tire Pressure Reset Method: First, turn on the ignition switch, then press and hold the tire pressure monitoring reset button until you hear a "beep" sound before releasing it. The tire pressure monitoring system will store the current normal tire pressure data, automatically clear the previous data, and finally, the warning light on the dashboard will turn off, indicating the tire pressure reset is complete. There are three commonly used tire pressure monitoring methods: Direct Tire Pressure Monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire pressure. The pressure information is transmitted wirelessly from inside the tire to a central receiver module, which then displays the tire pressure data for each tire. The system automatically alerts when the tire pressure is too low or if there is a leak. Indirect Tire Pressure Monitoring: When the pressure in a tire decreases, the vehicle's weight causes the rolling radius of that wheel to become smaller, resulting in a faster rotation speed compared to the other wheels. By comparing the differences in rotation speeds between the tires, the system monitors the tire pressure. Indirect tire pressure monitoring systems essentially rely on calculating the rolling radius of the tires to monitor pressure. Introduction to Tire Pressure Monitoring System (TPMS): This system combines the advantages of both the direct and indirect systems. It is equipped with direct sensors in two diagonally opposite tires and an indirect system for all four wheels. Compared to a fully direct system, this hybrid system can reduce costs and overcome the limitation of indirect systems, which cannot detect simultaneous low pressure in multiple tires. However, it still cannot provide real-time pressure data for all four tires as accurately as a direct system.

1

4

Share

What transmission does the Baojun 310 use?

Baojun 310 uses a total of three transmissions, which are a 5-speed manual transmission, a 6-speed manual transmission, and a 5-speed AMT transmission. More details about the Baojun 310 are as follows: 1. The Baojun 310 adopts a 'double U' front face design, with a three-horizontal-bar front grille, sharp headlight styling, equipped with lenses inside, and L-shaped eyebrow lights. 2. The interior of the Baojun 310 retains the design of the current model, continuing to use a rotary gearshift mechanism + paddle shifters and 2 driving mode switching functions. 3. The Baojun 310 offers two different displacement powertrains, which are a 1.2L naturally aspirated engine and a 1.5L-DVVT naturally aspirated engine.

12

3

Share

What are the dimensions of the Tayron?

The dimensions of the Volkswagen Tayron are 4589mm in length, 1860mm in width, and 1660mm in height, as per official data. The length of the Volkswagen Tayron refers to the distance between two vertical planes perpendicular to the vehicle's longitudinal symmetry plane, touching the outermost protruding points at the front and rear of the vehicle. The width refers to the distance between two parallel planes aligned with the vehicle's longitudinal symmetry plane, touching the outermost rigid fixed protruding points on both sides of the vehicle. The height refers to the distance between the highest point of the vehicle and its supporting plane. The turbocharged engine of the Volkswagen Tayron delivers maximum power outputs of 110kW, 137kW, and 162kW, with maximum torque outputs of 250Nm, 320Nm, and 350Nm. It features direct fuel injection technology and utilizes an aluminum alloy cylinder head and block. This engine is paired with a 7-speed wet dual-clutch transmission. National regulations stipulate specific dimensions for vehicles. According to the national standard 'GB1589-89,' the total width of a vehicle excludes side mirrors. The limitation on vehicle width is designed to ensure sufficient lateral clearance between adjacent lanes for overtaking. This means that under national standards, the significance of vehicle width data lies in providing adequate space during overtaking, preventing accidents due to excessive width or situations where road markings are narrower than the vehicle's width. Additionally, national regulations stipulate that the total width of a vehicle must not exceed 2.5m to comply with the requirements of public road usage.

17

1

Share

Has the Kia Forte Koup Been Discontinued?

Kia Forte Koup has been discontinued, with the last model being the 2014 version, which was launched in February 2014. More details about the Kia Forte Koup are as follows: 1. The Kia Forte Koup is positioned as a sports car, with a 2-door, 5-seat hardtop coupe structure and a front-engine, front-wheel-drive layout. 2. The dimensions of the 2014 Kia Forte Koup are 4555mm in length, 1780mm in width, and 1420mm in height, with a wheelbase of 2700mm. 3. The 2014 Kia Forte Koup was equipped with either a 1.6T or a 2.0L engine, paired with a 6-speed automatic transmission. The maximum power outputs of the 1.6T and 2.0L engines are 150 kW and 118 kW, respectively, with maximum torques of 265 Nm and 194 Nm.

11

0

Share

What is the tire model of the 2014 Nissan Sunny?

Where to Add Coolant in a BMW?

How to Replace the Battery in a Lavida Car Key?

How to Check the Tire Pressure Monitoring on Trumpchi GM8?

What transmission does the Baojun 310 use?

What are the dimensions of the Tayron?

Has the Kia Forte Koup Been Discontinued?

What Causes the Anti-Skid Light to Appear on the Car?

Is Higher Oil Viscosity Always Better?

What Causes Car Lights to Flash?

What brand is Jetta?