···
Log in / Register

What is the tire model of Leopard?

3 Answers
OwenAnn
08/26/25 4:45am
The tire model of Leopard is 225/60R18. The first number 225 represents the tire width of 225MM, 60 indicates the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width, the letter R stands for radial tire, and 18 represents the rim diameter of 18 inches. The maximum speed of Leopard is 170km/h, with a 0-100km/h acceleration time of 14 seconds and a fuel consumption of 7.3L per 100km. In addition to the model, the following common data are also marked on the tire: Tire cord material: Represented by Chinese Pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Commonly used speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Indicates the rim specification compatible with the tire. For practical use, such as standard rim 5.00F.
Was this review help?
10
1
Share
StZachary
09/08/25 6:21am
As a car enthusiast who often tinkers with my own vehicle, I've noticed significant variations in tire specifications across different Leopaard models. For instance, the base version of the Leopaard CS10 typically uses 215/65 R16 98H tires - where 215 indicates the tread width in millimeters, 65 represents the aspect ratio (height percentage), and R16 denotes 16-inch rims. This specification strikes a balance between fuel efficiency and road grip. Sportier models like the CS9 or Q6 may use larger 225/60 R17 tires for enhanced handling, though with slightly increased fuel consumption. The exact specifications depend on the vehicle's production year and configuration, with original tires usually being GT Radial or Michelin. Never arbitrarily switch to smaller sizes as this may compromise safety and suspension systems. The factory specifications are labeled on the door jamb sticker or in the manual - never skip checking these. For frequent off-road driving, I recommend durable tread patterns, with regular pressure checks and tread wear monitoring to prevent blowouts and extend tire life. Always purchase replacement tires from authorized dealers to ensure original specifications are maintained, as improper matches may cause excessive noise and brake wear.
Was this review help?
15
2
Share
Expand All
Laila
10/22/25 6:25am
As a long-time owner who drove a Leopaard CS10 for several years, I originally had the factory-fitted 215/65 R16 wide tires. After driving on some rough roads, I switched to a more durable size—check your vehicle manual for specifics. Tires aren't set in stone; early models might have smaller ones like 205/65 R15, while newer Q6 versions upgrade to 225/65 R17 for better high-speed stability. When choosing tires, don’t just focus on the size—brand matters too. Giti offers good value but is a bit noisier, while Michelin delivers quiet comfort at a higher price. I make it a habit to check tread depth and tire pressure every six months, replacing them if below 2mm—safety first! For off-road driving on gravel roads, upsizing helps, though fuel consumption may rise slightly. Before swapping tires, snap a photo of your door label for reference, and don’t blindly trust random online quotes. Simple maintenance like regular tire rotation also extends even wear, saving money and hassle.
Was this review help?
11
5
Share
Expand All
More Forum Discussions

How early can the vehicle annual inspection sticker be obtained?

Vehicle annual inspection stickers can be obtained 3 months in advance. Below is relevant information about vehicle annual inspections: Introduction to vehicle annual inspection: The timing of vehicle annual inspections is not calculated based on specific dates, but rather by month. If a vehicle's annual inspection is due on September 10th, the inspection can be conducted in advance during July, August, or September. Important notes: Vehicles that fail to undergo annual inspection on time and continue to be driven will be subject to fines and 3 penalty points, and the vehicle may be impounded. If the annual inspection is overdue, previously purchased vehicle insurance will not be valid. In case of any traffic accidents during this period, the insurance company will not provide compensation.
13
3
Share

How to Reset the Tire Pressure Monitoring Light on the Outlander?

The method to reset the Outlander's tire pressure light is as follows: When the warning light comes on, locate the tire pressure reset button below the left side of the steering wheel. Press and hold it for a few seconds until the tire pressure warning light turns off, indicating a successful reset. If manual reset fails, professional technicians should be consulted to clear the fault code. The steps to reset the Outlander's tire pressure warning light are detailed below: 1. Drive slowly to a safe location and park. Turn off the engine, wait for 1-2 minutes, and then restart the vehicle. After the vehicle stabilizes, check the tire pressure values displayed on the dashboard. 2. Both underinflation and overinflation can trigger the tire pressure light. Drive slowly to a car repair shop or auto beauty shop to adjust the tire pressure. If you have a personal inflation device, you can adjust the tire pressure on the spot. 3. While inflating or deflating the tires, observe the tire pressure light on the dashboard. Stop inflating once the light turns off. If overinflated, release the excess air. 4. If the tire pressure light remains on after adjustment, a manual reset may be required. Locate the settings button on the vehicle's central console, typically labeled 'SET,' to reset the tire pressure. 5. If the vehicle does not support manual operation, ensure the tire pressure is normal and have a technician use a specialized diagnostic tool to clear the fault code.
14
0
Share

Is Power Steering Fluid the Same as Transmission Fluid?

Power steering fluid and transmission fluid are not the same. Transmission fluid can be used as power steering fluid in cars, but power steering fluid cannot be used as transmission fluid. The main component of transmission fluid is lubricating oil, and the additives used in transmission fluid and power steering fluid are different. Transmission fluid and power steering fluid are absolutely not interchangeable. The main function of transmission fluid is to keep the gear system clean, lubricate the car's transmission device, and extend its service life. Power steering fluid is mainly used to increase driving comfort, automatically providing steering force when the driver is operating the vehicle, making the driving process easier and reducing steering fatigue for the driver.
5
1
Share

What are the symptoms of a broken transmission mount pad?

Transmission mount pad failure symptoms: The car will vibrate when starting, and the stability of the car will be reduced during driving. After the transmission mount pad is damaged, it needs to be replaced immediately. If the transmission mount completely breaks during driving, the support force of the transmission will lose balance. Whether it's an automatic or manual transmission model, the gear shifting will become abnormal during operation. A damaged transmission mount can also cause jerking during transmission operation. The reason for this phenomenon is that the transmission oil temperature is too high, and impurities have appeared inside the transmission oil, leading to jerking during operation.
6
4
Share

Will there be any impact after resetting the transmission?

Resetting the transmission may have some impact, such as increased fuel consumption and gear shifting jerks, but these issues will resolve after some time because the transmission's computer has a learning function. There are three common types of automatic transmissions in vehicles: dual-clutch transmission (DCT), automatic transmission (AT), and continuously variable transmission (CVT). The dual-clutch transmission simply adds an extra set of clutch and shift control mechanism compared to a manual transmission. One set of clutches controls the odd-numbered gears, while the other controls the even-numbered gears. The CVT transmission offers relatively smoother gear shifting. The AT transmission is an automatic transmission with a complex structure and mature technology.
11
5
Share

Where is the OBD interface of Peugeot 3008?

The OBD interface of Peugeot 3008 is located under the steering wheel, specifically at the place where the driver's left knee touches. Inside is the OBD interface. The OBD interface is also called the computer interface, which is translated into Chinese as the on-board diagnostic system. This system constantly monitors the operating conditions of the engine and the working status of the exhaust after-treatment system. Once a problem is detected, it will record and store the issue. The Peugeot 3008 features a rounded front end, with the engine hood, full front bumper, fenders, and A-pillar all exhibiting a plump and smooth design. This car also offers eight color options for consumers to choose from: Pearl Black, Deep Sea Blue, Neptune Gray, Rainforest Brown, Babylon Red, Mist Gray, Crystal Silver, and Ivory White.
6
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.