What is the tire model of Jianghuai Refine?

2 Answers
LaEmery
08/28/25 6:26am
There are two types of Jianghuai Refine tires, which are 205/70R15 and 215/70R15. In 205/70R15, the first number 205 represents the tire width of 205MM, 70 indicates the aspect ratio of the tire section is 70%, meaning the section height is 70% of the width, and 15 represents the rim diameter of 15 inches. The letter "R" in the middle stands for radial tire. In 215/70R15, the first number 215 represents the tire width of 215MM, 70 indicates the aspect ratio of the tire section is 70%, meaning the section height is 70% of the width, and 15 represents the rim diameter of 15 inches. The letter "R" in the middle stands for radial tire. The tire brand of Jianghuai Refine is GitiWingro series, and the spare tire specification is full-size. If you want to replace the tire by yourself, you can follow the steps below: Take out the spare tire and jack, place the jack under the frame of the tire to be replaced, and ensure that the jack touches the metal part of the frame; Raise the jack until it supports the car. The jack should be under the vehicle, check and ensure that the jack is at a right angle to the ground; Remove the hub cover, loosen the nuts counterclockwise. Do not completely loosen the nuts, just enough to eliminate the resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that it is the nut that turns, not the tire; Turn the nuts counterclockwise until they are loose, repeat this step for all lug nuts, and completely remove the nuts; Place the new tire on the hub, carefully align the tire rim and wheel bolts, install the lug nuts, and tighten the nuts by hand until all nuts are hidden. At this point, the tire replacement is completed. In addition to the model, the following common data are also marked on the tire: Tire cord material: represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: indicates the maximum speed at which the tire can carry the specified load under specified conditions. Letters A to Z represent the certified speed rating of the tire from 4.8km/h to 300km/h. Commonly used speed ratings are: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification that matches the tire. It is convenient for practical use, such as: standard rim 5.00F.
Was this review help?
2
1
Share
OColin
09/10/25 4:45am
I am the owner of a JAC Refine S3 and have driven it for several years, so I am very familiar with its details. The original tire size is 205/55R16, which provides good stability both in the city and on highways, while also maintaining fuel efficiency. I've replaced the tires a few times and found that Michelin tires offer excellent noise reduction, while Bridgestone tires are more durable. Regularly checking tire pressure is crucial. In summer, it's recommended to inflate them to around 2.5 bar, while in winter, you can lower it slightly to 2.3 bar to avoid slipping or blowouts. If the tires show uneven wear, it might be an alignment issue, so I suggest getting a wheel alignment check every 10,000 kilometers. Additionally, when choosing tires, pay attention to the tread depth—new tires usually have about 8 millimeters, and they should be replaced once the depth falls below 3 millimeters. With proper maintenance, the tires can last five to six years.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

Is a tire pressure of 250 kPa too high?

A tire pressure of 250 kPa is not too high, as this value falls within the normal range. A tire pressure of 250 kPa is equivalent to 2.5 bar. According to the international GBT2978-2008 standard, the recommended tire pressures for different types of tires are as follows: standard tires should be inflated to 2.4-2.5 bar; reinforced tires should be inflated to 2.8-2.9 bar; and the maximum tire pressure should not exceed 3.5 bar. Tire pressure is critical for tire performance. Both overinflation and underinflation can shorten the lifespan of a tire. Underinflation increases tire deformation, leading to cracks on the sidewalls and excessive flexing, which generates heat and accelerates rubber aging. Overinflation causes excessive tension on the tire cords, reducing elasticity and increasing the load on the tire during driving. This can lead to internal cracks, blowouts, accelerated tread wear, and reduced resistance to punctures.
18
0
Share

What Causes Frequent Bluetooth Disconnections in Cars?

The reasons for frequent Bluetooth disconnections in cars include poor Bluetooth compatibility, magnetic field interference, too many connection records, etc. Specific causes and solutions are as follows: Causes of car Bluetooth disconnections: Poor compatibility between the car's infotainment system and the phone's Bluetooth, leading to unstable connections; frequent exposure to areas with strong magnetic field interference, such as communication base stations or substations; interference from electronic devices inside the car causing intermittent disconnections; too many connection records stored in the car's system, leading to confusion when selecting connections. Solutions for car Bluetooth disconnections: Update the navigation system or phone's operating system to ensure compatibility; try turning off unnecessary electronic devices in the car; clear connection records or reset the car's system to factory settings; switch music apps; restart the phone or charge it, as low battery levels may also cause unstable Bluetooth connections.
19
0
Share

What are the tips and rhymes for gear shifting in Subject 2?

Here are the tips and rhymes for gear shifting in Subject 2: 1. Online: Drive the car straight forward, align the front of the car with the 7-meter line ahead, and slowly turn the steering wheel to the right until it's fully locked. When the left edge of the car aligns with the 7-meter line, turn the wheel one full turn to the left, prepare the brake, then turn another full turn to align the car with the 7-meter line and stop. 2. Close to the garage: Shift into reverse, release the brake, slowly lift the clutch to start the car moving slowly, and keep the clutch pressed. Look at the right rear window point aligning with the middle pole, turn the wheel to the right, and when the middle pole aligns with the left rear pole of the garage, turn the wheel fully to the right. When the right point of the rear windshield aligns with the middle pole, turn the wheel back two full turns to the right, hold the wheel at the 12 o'clock position, and look toward the middle to adjust the rear midpoint. Then, naturally look back at the lower right corner of the rear windshield, and when it aligns with the middle pole, press the clutch and brake to stop. 3. First up: As the car moves, quickly turn the wheel two full turns to the right, and when the left edge of the car aligns with the middle pole, turn the wheel fully to the left (left turn four full turns). When the right edge aligns with the middle pole (car straightens), turn the wheel back two full turns to the right, prepare to brake, and stop. 4. First down: As the car moves, turn the wheel two full turns to the right, and when the left edge aligns with the side pole, turn the wheel fully to the left. When the car straightens, turn the wheel back two full turns, stop without touching the rear pole, and the car should be halfway into the garage.
2
2
Share

What is the battery model for the Geely Emgrand key?

Geely Emgrand GL key uses a 3V CR2025 coin cell battery. The method and precautions for replacing the battery are as follows: Method to replace the car key battery: Press the smart key switch to remove the mechanical key; After removing the mechanical key, you can see an "OPEN" mark on the shell of the remote key; Insert a flat-head screwdriver into the larger groove below the OPEN mark; Twist the screwdriver to pry open the shell of the remote key; Remove the old battery and replace it with a new one. Precautions for battery replacement: When replacing the battery, pay attention to the positive and negative poles to avoid incorrect installation. If the car has a spare key and it is not used for a long time, you can remove the battery from the spare key to prevent battery drain.
9
3
Share

How many kilometers can a fully charged Porsche Taycan travel?

Porsche Taycan can travel 414 kilometers when fully charged. The Porsche Taycan is a mid-to-large-sized 4-door, 4-seater sedan with body dimensions of 4963mm in length, 1966mm in width, and 1395mm in height, with a wheelbase of 2900mm. The Porsche Taycan features a rear-wheel drive system, with a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. The Porsche Taycan is equipped with a 409-horsepower permanent magnet or synchronous electric motor and a 2-speed automatic transmission. The rear motor has a maximum power of 300 kW and a maximum torque of 345 Nm.
6
3
Share

Does the Tiguan L have a four-wheel drive model?

The Tiguan L does have a four-wheel drive model. The Tiguan L is a mid-size 5-door 7-seat SUV with body dimensions of 4716mm in length, 1859mm in width, 1677mm in height, and a wheelbase of 2791mm. The Tiguan L features a front-engine four-wheel drive system, with a front MacPherson strut independent suspension and a rear multi-link independent suspension. It is equipped with a 2.0L turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 162 kW at 4500-6200 rpm and a maximum torque of 350 N·m at 1500-4400 rpm.
19
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.