···
Log in / Register

What is the tire model of Haval H2?

6Answers
DeLena
09/07/2025, 12:16:30 AM

The tire model of Haval H2 is 235/55R18. The first number 235 represents the tire width of 235MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, and 18 represents the rim diameter of 18 inches. The middle letters or symbols have special meanings: "X" denotes high-pressure tires; "R" and "Z" denote radial tires; "—" denotes low-pressure tires. The fuel consumption of Haval H2 is 7.1L per 100 kilometers. In addition to the model, the tire also carries the following common data: Tire cord material: represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord. Speed rating: indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Commonly used speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification compatible with the tire, facilitating practical use, such as "Standard rim 5.00F".

Was this review help?
105
Share
DelWalter
09/18/2025, 11:39:31 PM

I've seen many friends who drive the Haval H2 mention that the common tire size for this car is 225/55R18, which means a width of 225 millimeters, an aspect ratio of 55%, 18-inch rims, and radial construction tires. This is just right for an SUV, providing stability and a smooth ride without being too bumpy. The specifications may vary with different configurations; for example, the entry-level version might have smaller 225/60R17 rims for better economy. Tire specifications have a significant impact—too wide increases fuel consumption, and too high affects handling. It's essential to match the original specifications to avoid triggering the ABS system alarm. I recommend checking the sticker on the side of the door to confirm your tire size or referring to the manual's maintenance table. Don't change sizes arbitrarily. When replacing tires, consider brands like Hankook or Goodyear for durability and easy cleaning. Maintain tire pressure at 2.3-2.5 bar for highway driving, and don't overlook regular wear checks to avoid the risk of blowouts.

Was this review help?
2
Share
Expand All
GavinRose
11/02/2025, 12:01:47 AM

As a Haval H2 owner, I've experienced several tire changes. The original tire models are mostly 225/55R18 or 225/60R17, depending on the model year you purchased. Larger tires provide better grip on city roads and more stability during high-speed cornering, but smaller tires are more practical and fuel-efficient for off-road conditions. I check the tread depth every 10,000 kilometers and consider replacement if it's below 1.6mm. I've used Michelin for comfort (though more expensive) and found Bridgestone to be quite wear-resistant. During maintenance, remember not to exceed 2.5 bar tire pressure to prevent premature wear. Rotating tires every 15,000 kilometers helps balance wear and extend lifespan, while avoiding sudden braking reduces tread loss and maintains safety.

Was this review help?
10
Share
Expand All
MacSebastian
12/15/2025, 11:05:22 PM

The Haval H2 typically uses 225/55R18 tires, which are safe and reliable, matching the vehicle's design to prevent rollovers. When driving on mountain roads or in rainy conditions, the correct tire size ensures grip and prevents skidding. I often remind beginners to check the door label to ensure consistency, as incorrect tires can lead to loss of control or increased fuel consumption. When replacing tires, choose compatible brands like Kumho for good value, and it's important to check the tire pressure monitoring system monthly.

Was this review help?
3
Share
Expand All
MacBryce
02/04/2026, 11:56:50 PM

After years of driving, I've noticed that the Haval H2 mostly uses 225/55R18 tire size. During maintenance, regularly check the tire pressure set between 2.3-2.5 bar, as overinflation or underinflation accelerates wear and affects balance. Perform tire rotation every 20,000 kilometers to extend lifespan, and clean wheel rim mud to prevent sidewall corrosion. When replacing tires, remember to stick to the original 225/55R18 specification or variants like 225/60R17 without modification. Goodyear is recommended for durability. Replace tires immediately when tread depth falls below 1.6mm to prevent accidents.

Was this review help?
2
Share
Expand All
VanDominic
04/30/2026, 04:04:44 PM

The tire model of the Haval H2, such as 225/55R18, is relatively common among other SUVs, being more robust than sedans to ensure off-road capability. Having driven comparable vehicles, I found the similar size offers stable handling and reasonable fuel consumption. When replacing tires, stick to the original specifications to avoid interfering with the system. Brands like Yokohama or Dunlop are good choices. Pay attention to tire aging, as they degrade quickly after 6 years and need replacement. Avoid sudden acceleration to protect the tread in daily use.

Was this review help?
9
Share
Expand All
More Q&A

What is the Difference Between Direct Injection and Electronic Fuel Injection in Cars?

The differences between direct injection and electronic fuel injection in cars are as follows: 1. Fuel injection method: Electronic fuel injection sprays fuel into the engine's intake manifold, while direct injection sprays fuel directly into the engine's cylinder. 2. Different installation positions of the fuel injector: In multi-point electronic fuel injection, the injector is installed at the end of the intake manifold, and the fuel spray is directed into the intake ports of each cylinder; the air-fuel mixture is formed outside the cylinder. In direct injection, the injector is installed on the cylinder head, spraying fuel directly into the cylinder; the air-fuel mixture is formed inside the cylinder. 3. Different fuel injection pressures: Multi-point electronic fuel injection operates at pressures between 2.5bar and 4bar, while direct injection operates at pressures between 40bar and 400bar. 4. Different fuel supply system compositions: Multi-point electronic fuel injection does not have a high-pressure fuel pump, whereas direct injection includes one. 5. Different fuel injection start angles and durations: Due to lower injection pressures, multi-point electronic fuel injection requires a longer injection time under heavy loads, and the next injection cycle may need to start after the intake valve closes. However, direct injection occurs after the intake valve opens and can take place during both the intake and compression strokes. Direct injection lowers the cylinder temperature at the moment of compression, aiding in the cooling of the piston and cylinder liner, thereby reducing the engine's tendency to knock. As a result, direct injection engines can achieve a higher compression ratio, leading to improved thermal efficiency.
115
Share

What is the fuel consumption of the CR-V 2.4L 4WD Luxury Edition?

CR-V 2.4L 4WD Luxury Edition has a fuel consumption of 11.2L/100KM. Below are the detailed specifications of the Honda CR-V: 1. Drivetrain: The Honda CR-V comes in two versions: a two-wheel-drive model and a four-wheel-drive model. The four-wheel-drive version features a front-engine, four-wheel-drive system with an on-demand all-wheel-drive configuration. 2. Powertrain: The Honda CR-V is equipped with two i-VTEC engines: a 2.0L and a 2.4L. The 2.0L engine delivers a maximum power of 114kW and a peak torque of 190N·m, while the 2.4L engine produces a maximum power of 140kW and a peak torque of 222N·m. 3. VTEC Technology: The Honda CR-V features VTEC engine technology, which stands for Variable Valve Timing and Lift Electronic Control System. Unlike conventional engines, VTEC engines differ in the number and control method of camshafts and rocker arms, featuring two distinct sets of valve drive cams for low-to-medium and high-speed operations, with automatic switching via electronic control. The VTEC system allows the engine to automatically adjust valve opening timing and lift based on driving conditions, thereby altering intake and exhaust volumes. This results in increased power output, reduced fuel consumption, and lower emissions.
108
Share

Will I Get Penalized for Driving with the Trunk Open While Carrying Items?

Driving with the trunk unclosed and in an open state is considered a traffic violation. Typically, traffic cameras do not capture this type of violation. However, if spotted by traffic police, the vehicle may be stopped, and a ticket will be issued for violating road traffic safety laws and regulations regarding road usage. Below are some precautions regarding the trunk: 1. Avoid storing flammable and explosive items: As the trunk is an enclosed space, temperatures can rise rapidly. Storing lighters, hairspray, or other flammable and explosive items in the trunk, especially during summer heat and long-distance travel, can lead to explosions with unimaginable consequences. 2. Avoid storing valuables: Keeping valuables, premium cigarettes, or fine liquor in the trunk is highly unsafe. Thieves are cunning, and it is absolutely inadvisable to leave valuables in the car trunk.
110
Share

Is Half Engagement Stepping on the Clutch Halfway?

Half engagement is stepping on the clutch halfway. Here is an introduction to half engagement: 1. Introduction: Clutch half engagement refers to the unstable connection state of the clutch, where the driver presses the clutch pedal, gradually reducing the pressure of the clutch pressure plate, causing the driving plate and the driven plate to be in a state of both rotating and slipping. During the field driving test, drivers who are not yet proficient in operation and cannot complete the required actions within the specified time often use half engagement to reduce the vehicle speed, thereby extending the operation time. However, the rules for off-field driving tests do not allow the use of half engagement. 2. Half Engagement: Half engagement is when the clutch is between disengaged and engaged, and the transmission system is between connected and disconnected, providing a flexible power source. It is frequently used in complex road conditions, as well as during starting, turning, and short-distance following. When the clutch is in the half engagement state, the friction between the pressure plate and the friction disc is minimal.
103
Share

How to Turn on the Cold Air in the 7th Generation Accord?

The cold air in the 7th generation Accord can be turned on by pressing the A/C button. AUTO means to turn on, press it once, and the fan will start working. Here are more related introductions: 1. Air Conditioning Cooling Principle: After the air conditioner is powered on, the low-pressure steam of the refrigerant in the refrigeration system is sucked in by the compressor and compressed into high-pressure steam, which is then discharged to the condenser. At the same time, the outdoor air sucked in by the axial fan flows through the condenser, taking away the heat released by the refrigerant, causing the high-pressure refrigerant steam to condense into high-pressure liquid. It exchanges heat with the outdoor air to become medium-temperature and medium-pressure refrigerant liquid, which then enters the evaporator after being throttled and depressurized by the capillary tube, evaporating under the corresponding low pressure and absorbing the surrounding heat. 2. Air Conditioning Buttons: The left and right sides respectively adjust the cold and hot air for the driver and passenger. Blue represents cold air, and red represents hot air. Adjust both sides to the lowest blue area, which means pressing the blue button to the lowest state, and then press the A/C air conditioning switch button once.
109
Share

What Should You Ask the Dealer for When Buying a New Car?

When purchasing a new car, you should request complimentary items from the dealer such as window tinting, floor mats, small gifts like cakes and perfumes, full-coverage floor mats, and reflective vests for the vehicle. Below is an introduction to related automotive content: 1. Determining Factors: The quality of a vehicle's handling is primarily determined by three factors: power, suspension, and steering system. 2. Detailed Introduction: Power is the foundation of handling. Only with strong and smooth power output can a vehicle qualify to discuss handling; Suspension is the key to handling. Generally speaking, for two cars with similar power, the difference in handling depends on the suspension. A solid and resilient suspension ensures stable and reliable handling.
105
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.