What is the tire model of BYD Qin Hybrid?

1 Answers
LeIsabel
07/29/25 5:32pm
The tire model of BYD Qin Hybrid is 205/55R16. The first number 205 indicates the tire width is 205MM, 60 represents the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width. The letter R stands for radial tire, and 16 denotes the rim diameter is 16 inches. The BYD Qin Hybrid has a top speed of 185km/h, accelerates from 0-100km/h in 15.3 seconds, and has a fuel consumption of 6.4L per 100km. In addition to the model, the tire also displays the following common data: Tire cord material: Represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed the tire can carry a specified load under specified conditions. Letters from A to Z represent certified speed ratings ranging from 4.8km/h to 300km/h. Commonly used speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Shows the rim specification compatible with the tire for practical use, such as "Standard Rim 5.00F".
Was this review help?
19
0
Share
More Forum Discussions

Can the Mercedes-Benz GLE Hybrid be registered with an energy-saving license plate?

The Mercedes-Benz GLE Hybrid is a new energy vehicle that can be registered with a green license plate. Performance of the Mercedes-Benz GLE Hybrid: It is equipped with a 2.0T engine and a drive motor with a maximum power of 100kW. The combined system power reaches 245kW, with a combined torque of 785N.m, equivalent to a 3.0T V6 engine. Paired with a 9AT transmission, it achieves a 0-100km/h acceleration time of 7.4 seconds, delivering solid overall performance. As a plug-in hybrid, the GLE features a 31.2kWh battery, offering a pure electric range of 103km. With a full tank of fuel and a full charge, the hybrid mode delivers very low fuel consumption, and the overall range performance is quite impressive. Introduction to Green License Plates: New energy vehicle license plates are primarily green, divided into small and large new energy vehicle-specific plates, measuring 48cm × 14cm. The number of digits has increased from 5 to 6. Small new energy vehicle-specific plates are gradient green, with the first digit being the letter D or F. Large new energy vehicle-specific plates are a combination of yellow and green, with the sixth digit being the letter D or F. Here, D represents pure electric new energy vehicles, while F represents non-pure electric new energy vehicles. Vehicles eligible for green license plates include pure electric vehicles (exempt from tail number restrictions), plug-in hybrid vehicles, and fuel cell vehicles (subject to the same tail number restrictions as fuel-powered and hybrid vehicles).
10
2
Share

Is the new Jetta SUV VS5 a joint venture car?

It is a joint venture car. The VS5 comes from the Jetta brand, which is a joint venture established by the German Volkswagen Group in China. It belongs to FAW-Volkswagen Automotive Co., Ltd. Before the brand was established, Jetta was sold as a standalone model in the domestic market. The vehicle has a body length of 4419 mm, a width of 1841 mm, a height of 1616 mm, and a wheelbase of 2630 mm. It is a five-door, five-seater SUV with a fuel tank capacity of 51 liters and a luggage compartment capacity of 482 liters. The vehicle is positioned as a compact SUV, equipped with a 1.4L turbocharged engine, paired with either a five-speed manual transmission or a six-speed automatic transmission.
14
4
Share

What is the actual fuel consumption of the Beijing 40?

BJ40 is a mid-size SUV under Beijing Automotive, positioned as a hardcore off-road vehicle. The diesel version of Beijing Automotive BJ40 has a combined fuel consumption of 8.5L per 100km, compared to 9.1L per 100km for gasoline models of the same displacement. The following is a related introduction to the Beijing 40: 1. Exterior: The front face adopts a split-type upper and lower grille design, with a five-hole shape inside connected to the headlight groups on both sides. The side profile of the body is square and features integrated turn signal mirrors and five-spoke wheels. The rear continues the square design of the front, with a two-stage tailgate opening and an externally mounted full-size spare tire, further emphasizing its identity as a hardcore off-road vehicle. 2. Interior: The overall design is symmetrical, using an all-black color scheme with chrome accents added to many details. The dashboard is equipped with round air vents and a level gauge, the three-spoke multifunction steering wheel is centered with the BAIC logo, and the instrument cluster adopts a dual-barrel design. 3. Powertrain: The BJ40 is equipped with a 2.0T diesel engine model YC4Y20-15058, with a maximum power of 110kW, paired with a manual transmission. The new vehicle's fuel consumption is significantly reduced compared to gasoline models of the same displacement, and it features a part-time four-wheel-drive system.
10
1
Share

What is the fault when the Jetta EPC light is on?

The first reason is that the brake lights are not working. When all the brake lights of the vehicle are not working, the EPC fault light will appear. The second reason is a throttle fault. If there is an issue with the engine's throttle or its wiring, the EPC light will also illuminate. The fourth reason is a faulty clutch switch. Similar to the brake switch, if the clutch switch is faulty, the EPC light will appear. In the past, drivers controlled the throttle opening based on the engine's power demand by operating the accelerator pedal, which was connected via a cable to the throttle. In the EPC system, the traditional throttle cable is replaced by a sensor in the pedal assembly.
2
0
Share

What is the purpose of front wheel toe-in?

The purpose of front wheel toe-in is to eliminate the adverse effects caused by wheel camber, ensure the wheels do not roll outward, prevent wheel sideslip, and reduce tire wear. The toe-in value can be adjusted by changing the length of the tie rod, typically ranging from 0 to 12mm. Front wheel toe-in refers to the distance difference between the front and rear edges of the front wheels in the lateral direction of the vehicle, or it can refer to the angle between the direction of the vehicle's movement and the plane of the front wheels, in which case it is also called the toe-in angle. Proper selection of the toe-in angle can allow the lateral forces caused by toe-in to counteract the thrust caused by wheel camber, thereby avoiding additional tire wear and power consumption.
18
5
Share

What is the 0-100 km/h acceleration time of the Genesis G80?

Genesis G80 accelerates from 0 to 100 km/h in just 4.9 seconds. Here is a detailed introduction about the Genesis G80: 1. Interior: Primarily dark-toned, reflecting the premium brand's texture. The overall design features horizontal lines as the main element. The 14.5-inch central control screen on the dashboard is quite prominent, and the instrument panel uses a 12.3-inch LCD screen. 2. Powertrain: Equipped with a 2.5T turbocharged four-cylinder and a 3.5T V6 turbocharged gasoline engine, with maximum power outputs of 304 horsepower and 380 horsepower respectively, and peak torques of 421 Nm and 530 Nm respectively. In markets such as South Korea and Europe, the new car also offers a 2.2T diesel engine with a maximum power of 210 horsepower.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.