What is the tire model of Audi Q7?

1 Answers
LilaAnn
07/30/25 5:13am
The tire model of Audi Q7 is 285/40r21. The first number 285 represents the tire width of 285MM, 40 indicates that the aspect ratio of the tire section is 40%, meaning the section height is 40% of the width, the letter R stands for radial tire, and 21 represents the rim diameter of 21 inches. The Audi Q7 has a top speed of 220km/h, accelerates from 0 to 100km/h in 5.6 seconds, and has a fuel consumption of 3.8L per 100km. In addition to the model, the tire also displays the following commonly used data: Tire cord material: indicated by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord. Speed rating: indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters from A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Commonly used speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification compatible with the tire for practical use, such as "Standard Rim 5.00F".
Was this review help?
19
5
Share
More Forum Discussions

How to Identify a Car Model?

Methods for identifying a car model: Identify through the Vehicle Identification Number (VIN), which is a 17-digit code composed of letters and numbers. The 1st to 3rd digits represent the country of production, manufacturer, and vehicle type code respectively; the 4th to 8th digits indicate vehicle characteristics, with meanings defined by each manufacturer; the 9th digit is a check digit, which can be represented by a letter or number. The 10th digit of the VIN represents the production year code, denoted by a letter or number; the 11th digit indicates the assembly plant and location code; the 12th to 17th digits represent the production sequence number. The combination of the Vehicle Identification Number ensures that no two vehicles of the same model will have the same number within 30 years, providing a unique identifier for each vehicle, hence it can be referred to as the car's ID card.
14
1
Share

What is the maximum speed allowed on highways?

Running on the highway can reach a maximum speed of 120 kilometers per hour. The speed standards for highway driving are as follows: 1. Highways should indicate the speed of the vehicle lanes, with the maximum speed not exceeding 120 kilometers per hour and the minimum speed not lower than 60 kilometers per hour; 2. The maximum speed for small passenger vehicles on highways should not exceed 120 kilometers per hour, while other motor vehicles should not exceed 100 kilometers per hour; 3. If there are 2 lanes in the same direction, the minimum speed for the left lane is 100 kilometers per hour; if there are 3 or more lanes in the same direction, the minimum speed for the leftmost lane is 110 kilometers per hour, and the minimum speed for the middle lane is 90 kilometers per hour. If the speed indicated by road speed limit signs is inconsistent with the above lane speed regulations, the speed indicated by the road speed limit signs should be followed.
17
2
Share

What is the ground clearance of the Buick GL6?

The minimum ground clearance of the Buick GL6 is 14.5cm. Below is the relevant content: Introduction to Minimum Ground Clearance: Ground clearance refers to the distance between the ground and the rigid object at the bottom of the vehicle. Ground clearance is related to the vehicle's load—the heavier the load, the smaller the ground clearance. Since professional equipment and absolutely identical objective conditions are not used, the measured values may deviate slightly from the official data (objective factors include ground flatness, tire pressure, fuel level, etc.). Introduction to the Buick GL6: The Buick GL6 is a model under SAIC General Motors. Its body dimensions are 4692mm in length, 1794mm in width, and 1626mm in height, with a wheelbase of 2796mm. In terms of exterior design, the Buick GL6 features a winged chrome grille that extends through the headlights, forming a double-layer combination of LED headlights. It also has a floating roof, hidden D-pillars, and a unique streamlined window design that extends from the A-pillar to the rear, creating a smooth overall appearance.
17
0
Share

What Causes Air Brake Rollaway?

Air brake rollaway indicates that the parking brake is not fully engaged or there is a malfunction with the parking brake. Here are the solutions for air brake rollaway: 1. Engage the parking brake firmly. If the parking brake cable is damaged, it is usually due to misalignment or deformation of the parking brake shoe bracket, resulting in reduced contact of the brake shoe. A detailed inspection is required, and it is advisable to visit a 4S shop for repairs as soon as possible. 2. The air brake system is commonly used in the parking brake systems of medium and large-sized vehicles. In such systems, a powerful spring maintains a constant braking state. When the vehicle needs to move, the driver releases the parking brake by performing an inflation action. A certain level of air pressure must be reached to push the spring open, thereby releasing the parking brake and allowing the vehicle to move.
1
1
Share

Can I Buy Normal Insurance for a Used Accident Car?

It is not advisable to purchase a used car that has been involved in a serious accident. Accident-damaged vehicles are structurally compromised, meaning that once structural components are damaged, even if they are repaired through stretching, hammering, or other methods, the overall body rigidity cannot be fully restored. In the event of another collision, the car is likely to "fall apart." Below is additional information: 1. When a car is involved in a collision, the first parts to be damaged are usually the exterior panels, such as the engine hood, bumper, and fenders. However, if the collision is severe, it can affect various structural components within the engine compartment. Due to the high impact force, the mounting points of these components can become displaced. 2. If the damage is minor, dealers often do not repair it. If the damage is severe, the parts may be replaced. By examining the paint near the mounting screws, one can determine whether the area has endured significant impact. Additionally, if the screws have been replaced, the paint color and application pattern will noticeably differ from those of the original factory parts.
19
1
Share

Is it mandatory to install ETC equipment?

ETC requires the installation of equipment. According to Article 19 of the "Notice on Vigorously Promoting the Development and Application of Highway ETC" issued by the State Council, vehicles that have not applied for or are not using ETC by 2020 will not enjoy toll discounts. In the future, only one manual lane will be retained at highway toll stations, and tolls can only be paid through manual channels. ETC Working Principle: Through dedicated short-range communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, computer networking technology is used to conduct background settlement processing with banks. This achieves the purpose of vehicles passing through highway or bridge toll stations without stopping to pay tolls. ETC Deduction Principle: There will be one or more ETC lanes on highways. Through dedicated short-range microwave communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station, computer networking technology is used for background settlement with banks. This allows vehicles to pay tolls without stopping at highway or bridge toll stations, all based on the principle of passing first and deducting fees later. Benefits of Installing ETC: Time-saving: Eliminates the hassle of waiting in line; Green and eco-friendly: Green and low-carbon, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions and minimizing pollution; Reduced wear and tear: Saves costs, reduces the frequency of vehicle starts and brakes, and lowers wear and fuel consumption; Improved efficiency: The efficiency of ETC lanes can theoretically increase by 2-3 times, making traditional ETC more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation smart cards in key city clusters will be basically achieved, and the proportion of vehicles equipped with ETC will significantly increase." It also explicitly set the goal of "achieving a 50% ETC usage rate for road passenger vehicles by 2020" in the main indicators of comprehensive transportation development during the 13th Five-Year Plan. More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the ETC passenger vehicle usage rate, the future will also promote the use of ETC for trucks and explore the deep integration of the ETC system with smart transportation development directions such as vehicle-to-vehicle communication and vehicle-road coordination. This will provide comprehensive travel services for vehicle owners, meaning more application scenarios will support ETC applications.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.