What is the tire model for Toyota Camry?

3 Answers
McPaige
07/29/25 4:37pm
Toyota Camry tire models include 205/65R16, 215/55R17, and 235/45R18. Relevant information about car tires is as follows: Tire Classification: Car tires can be divided into pneumatic tires and solid tires based on their carcass structure. The vast majority of modern cars use pneumatic tires. Depending on the air pressure inside the tire, pneumatic tires can be categorized into high-pressure tires, low-pressure tires, and ultra-low-pressure tires. Tire Specification Meanings: Tire specifications are often represented by a set of numbers. The first number indicates the tire section width, and the latter indicates the rim diameter, measured in inches. For example, 165/70R14 means a tire width of 165 millimeters, an aspect ratio of 70, and a rim diameter of 14 inches. The letters or symbols in the middle have special meanings: "X" denotes a high-pressure tire; "R" and "Z" denote radial tires; "—" denotes bias-ply tires. For example, 6.00—12 refers to a bias-ply tire, which is only used in some low-end off-road vehicles and heavy-duty trucks due to its poor safety, load capacity, and high-speed stability.
Was this review help?
10
0
Share
JourneyMarie
08/14/25 5:59am
As a seasoned driver with over a decade of experience, I've handled many Camrys, and tire sizes definitely aren't one-size-fits-all. Different model years and trims vary—for instance, older LE models typically use 215/55R17, while newer SE or Hybrid versions may upgrade to 225/45R18. The first number indicates width, the slash is followed by aspect ratio, and 'R' stands for radial construction. Always check the door sticker or manual when replacing tires—wrong sizes can cause unstable steering or even fender rubbing. Monitor tire pressure regularly; suburban roads cause less wear while urban potholes shorten tire life. In cold weather, consider all-season or snow tires, but they must match OEM specs—safety first. Bottom line: verifying wheel dimensions during routine maintenance saves headaches.
Was this review help?
6
2
Share
Expand All
Harry
10/13/25 2:12am
I bought a Camry SE two years ago, and the tire specifications turned out to be a fun little discovery—the base model usually comes with 215/55R17, but my SE has 225/45R18. The size is printed on the side of the wheel, and the 'R' stands for radial construction. After purchasing, I realized each trim level has different specs, so it's important to ask the salesperson during the test drive. When replacing tires, make sure they match properly; otherwise, you might feel more drift at high speeds. Fuel efficiency is also affected—larger sizes can make the car harder to roll. On rainy or snowy days, poor traction becomes more noticeable, so it's wise to choose tires with good grip. Interestingly, tire selection can be quite personalized—higher trims might have flashier options, but practicality matters most. I regularly visit professional shops for maintenance—the mechanics can handle it in no time. Don’t try to cut corners yourself to save money; it could lead to bigger issues.
Was this review help?
3
0
Share
Expand All
More Forum Discussions

How to Clean Suede Leather Seats?

You can use a vacuum cleaner, universal foam cleaner, specialized suede leather cleaner, and professional softener for cleaning. When using a specialized suede leather cleaner, it is necessary to dissolve it in warm water first. Add the cleaner for dilution. After wetting the suede leather seats, start cleaning, and finally use a suede leather grooming brush to tidy up the suede. Place them in a well-lit environment to dry.
12
1
Share

Can a Cracked Rear Bumper Be Repaired?

After a car's rear bumper is cracked, it can be repaired. First, use a plastic welding gun to fix the crack by heating and melting the plastic welding rod and the surface of the film to achieve fusion and bonding. After repairing the crack, apply touch-up paint and then dry it to complete the repair. Here is some information about car bumpers: A car bumper is a safety device designed to absorb and mitigate external impacts, protecting the front and rear of the vehicle. It acts as a buffer when the car or the driver is subjected to collision forces. Plastic bumpers consist of three parts: the outer panel, cushioning material, and crossbeam.
8
2
Share

How to Clean a Car Engine Bay?

Open the hood, cover the distributor, battery, and brake fluid reservoir with plastic sheets, then rinse the engine with a water gun. Rinse the air intake vents and remove dirt from the engine bay insulation. Use a flannel cloth dipped in water to clean the radiator, cooling fins, and condenser. Carefully wash the engine bay support bars with a water gun, and use an air gun to blow away dust particles inside the bay. Remove the plastic sheets and thoroughly dry all parts of the engine bay with a towel or flannel cloth.
3
4
Share

How to Adjust Car Audio Settings for Optimal Sound?

It is necessary to boost the bass and treble while reducing the mid-range to compensate for the weak reproduction capability of high and low frequencies by the audio equipment. Generally, increasing the mid-range and slightly lowering the treble and bass can achieve good results. Boost the bass and mid-range more, and adjust the left-right and front-rear balance according to personal preference. Set the bass to 80Hz, treble to 12.5K, subwoofer filter to 120Hz, bass Q value to 1.25, and mid-range to 1.5K or 2K.
3
2
Share

How to Reset the Maintenance Light on a Nissan Murano?

Here are the specific steps to reset the maintenance light on a Nissan Murano: 1. Insert the key, but do not turn it. 2. Press and hold the trip odometer reset button for 5-10 seconds, then turn the ignition to the "ON" position. 3. After another 5-10 seconds, start the engine. Keep holding the reset button throughout this process. 4. If the wrench indicator does not disappear, repeat the procedure several times. 5. Note that maintenance intervals vary by manufacturer and model. Refer to your vehicle's owner's manual for the correct maintenance schedule. After servicing, technicians can reset the maintenance light using the proper procedure.
1
2
Share

How to Handle Vehicle Ownership Transfer Procedures?

Fill out one copy of the Motor Vehicle Alteration, Transfer, Modification, Suspension, or Scrapping Approval Form. Affix the same seal as the original registration, and private vehicle owners must present their ID card for verification. Proceed to the Vehicle Management Section of the Traffic Police Brigade and submit the documents for review by the registration acceptance officer. Vehicles meeting the transfer conditions will be sent to the motor vehicle inspection station for examination and confirmation. After successful review, pay the taxes according to regulations.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.