What is the tire model for the Tiggo 3?

1 Answers
DeDelilah
07/30/25 2:04am
Tiggo 3 comes with two tire specifications: 215/65R16 and 215/60R17. In 215/65R16, the first number 215 represents the tire width of 215MM, 65 indicates the aspect ratio of the tire section is 65%, meaning the section height is 65% of the width, and 16 denotes the rim diameter of 16 inches. The letter "R" in the middle stands for radial tire. In 215/60R17, the first number 215 represents the tire width of 215MM, 60 indicates the aspect ratio of the tire section is 60%, meaning the section height is 60% of the width, and 17 denotes the rim diameter of 17 inches. The letter "R" in the middle stands for radial tire. The brand used for Tiggo 3 tires is Giti, and the spare tire specification is non-full size. If you want to replace the tires yourself, you can follow the steps below: Take out the spare tire and jack, place the jack under the frame of the tire to be replaced, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car. The jack should be positioned under the vehicle, check and ensure the jack is perpendicular to the ground; Remove the hub cover, loosen the nuts counterclockwise. Do not completely loosen the nuts, just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts turn instead of the tire; Turn the nuts counterclockwise until they come off. Repeat this step for all lug nuts, then completely remove the nuts; Place the new tire on the hub, carefully align the tire rim with the wheel bolts, install the lug nuts, and tighten them by hand until all nuts are concealed. At this point, the tire replacement is complete. In addition to the model, the tire also has the following common data marked: Tire cord material: represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: indicates the maximum speed at which the tire can carry the specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification compatible with the tire for practical use, such as "Standard rim 5.00F".
Was this review help?
19
2
Share
More Forum Discussions

How to reset the tire pressure monitoring system on Honda CR-V?

Honda CR-V tire pressure monitoring system reset method is as follows: 1. Press the arrow button on the lower right side of the steering wheel until the central screen displays "Personalized Settings." 2. Press the SEL/RESET button, and the central screen will show "Enter/Tire Pressure Monitoring System Calibration." 3. Press the SEL/RESET button again, and the central screen will display "Set/Tire Pressure Monitoring System Calibration." 4. Press the arrow button on the lower right side of the steering wheel, and the central screen will show "Calibration 2/2." 5. Press the SEL/RESET button once more, and the central screen will display "Calibration Started." The tire pressure warning light will turn off after a few seconds. Hazards of excessive tire pressure: - Reduced tire friction and adhesion, affecting braking performance; - Causes steering wheel vibration and deviation, lowering driving comfort; - Accelerates wear on the central tread pattern, shortening tire lifespan; - Increases body vibration, indirectly affecting the lifespan of other components; - Overextends tire cords, reducing tire elasticity and increasing the load on the vehicle during driving; - Decreases puncture resistance. When encountering sharp objects like nails or glass on the road, they can easily penetrate the tire, causing internal cracks or blowouts, leading to tire bursts.
8
3
Share

How Many Liters Does a Sedan Consume per 100 Kilometers?

Generally, for a family sedan with a displacement of around 1.6 liters, the fuel consumption per 100 kilometers is approximately 6-8 liters. Here is some relevant information: 1. Calculation Method: When the fuel gauge needle of the vehicle drops to a certain position, go to a gas station to refuel, and record the amount of fuel added and the current odometer reading. After the vehicle has consumed fuel for a period and the fuel gauge needle returns to the position before the last refueling, check how many kilometers have been driven. This will give you the fuel consumption per 100 kilometers. 2. Precautions: Check whether the tire pressure meets the standard. If the tires are underinflated, fuel consumption will also increase. Inspect the degree of tire wear; if the tires are severely worn, slipping will frequently occur, increasing fuel consumption. If abnormal noises are heard from the wheels during driving or starting, promptly check whether there are faults in the bearings or braking system.
4
3
Share

What is the brand of Audi engine oil?

Audi's dedicated engine oil is produced by Castrol, originating from the UK. Detailed information is as follows: 1. Audi's dedicated engine oil includes two types of fully synthetic oils: 5W-40 and 0W-30. 2. For domestically produced models, it is recommended to use the 0W-40 type, while for imported models, the 0W-30 type is recommended. 3. Engine oil primarily serves to lubricate the engine, clean the engine, cool the engine, seal the engine, and provide rust and corrosion protection. 4. Choosing the right engine oil can reduce wear, provide protection, and extend the lifespan of the engine and its components.
7
0
Share

Where is the air conditioning filter of Venucia T70 located?

Venucia T70's air conditioning filter is located on the left side of the passenger's leg. Below is a partial introduction to the air conditioning filter: 1. The air conditioning filter, commonly known as the pollen filter, functions to filter the air entering the cabin from the outside, improving air cleanliness. 2. Air conditioning filters are generally divided into two types: ordinary air conditioning filters and activated carbon series air conditioning filters. Ordinary air conditioning filters can only inhibit the entry of dust and particles, while activated carbon series air conditioning filters can utilize the physical properties of granular activated carbon to adsorb other tiny particles and more harmful substances in the air during the short period of air resistance. 3. The replacement time and cycle for air conditioning filters are generally when the car has traveled 8,000-10,000 kilometers, but it can also be determined based on the external driving environment. If the environmental humidity contrast is large, it should be replaced in advance.
9
3
Share

How to Open the Fuel Tank Cap on a BMW 3 Series?

Simply press the fuel tank cap to open it on a BMW 3 Series. Below are specific details on cleaning the fuel tank: 1. A closed fuel tank accumulates a lot of gum, sludge, particles, and foil. Many substances in the fuel require regular cleaning to prevent excessive impurities from causing malfunctions. 2. Excessive deposits and water at the bottom of the tank can block ventilation pipes and fuel lines, creating negative pressure inside the tank and leading to poor fuel supply. This results in sluggish acceleration and reduced vehicle performance. If the fuel level is too low or insufficient at this point, it is essential to refuel immediately. Do not wait until the warning light comes on. If the fuel pump continues to operate under these conditions, it may overheat, affecting its lifespan, and in severe cases, the pump could burn out. 3. To clean the fuel tank, you can use the Aofu Fuel System Cleaning Protector. It effectively removes deposits from the tank and fuel lines, as well as cleans the injector nozzles, restoring and maintaining optimal injection performance. This improves combustion efficiency and saves fuel. In winter, it is advisable to switch to higher-octane gasoline. Due to low-temperature driving conditions, higher-octane gasoline has a higher ignition point and better ignition capability. Adjusting the fuel in the tank according to weather conditions and temperature changes enhances fuel efficiency.
16
1
Share

How to reset the tire pressure light on the Magotan?

There are two methods to reset the Magotan's tire pressure warning: 1. Operate the buttons on the multifunction steering wheel and select the "Tire Pressure" option in the multifunction menu to store the tire pressure status. 2. There is a tire pressure reset switch on the side of the gear lever. With the ignition switch turned on, press and hold this switch button until you hear a beep, indicating the reset is complete. Below is a brief introduction to the tire pressure light: If the tire pressure light comes on while driving, immediately reduce your speed, avoid sharp steering and sudden braking, and slowly drive to a safe place to stop. Then turn off the engine, wait a few minutes, and restart the vehicle. Once the vehicle is running stably, check if the tire pressure values are abnormal. If they are, adjust them immediately.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.