What is the tire model for the Mercedes-Benz E300?

2 Answers
Anthony
07/24/25 3:10am
245/45R18 is the tire specification for the Mercedes-Benz E300. The first number, 245, represents the tire width of 245MM. The number 45 indicates the aspect ratio of the tire section is 45%, meaning the section height is 45% of the width. The number 18 represents the rim diameter of 18 inches. The middle letter or symbol has a special meaning: "R" stands for radial tire. The tire brand for the Mercedes-Benz E300 is Bridgestone, featuring a five-spoke hollow design. If you want to replace the tires yourself, you can follow the steps below: Take out the spare tire and jack, place the jack under the frame of the tire to be replaced, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car. The jack should be positioned under the vehicle, and you should check to ensure the jack is at a right angle to the ground; Remove the hubcap and loosen the nuts counterclockwise. Do not fully loosen the nuts; just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts, not the tire, are turning; Turn the nuts counterclockwise until they come off. Repeat this step for all lug nuts and completely remove the nuts; Place the new tire on the wheel hub, carefully aligning the tire rim with the wheel bolts. Install the lug nuts and tighten them by hand until all nuts are concealed. At this point, the tire replacement is complete. Besides the model, tires also display the following common data: Tire carcass ply material: Indicated by Chinese pinyin, such as M for cotton ply, R for rayon ply, N for nylon ply, G for steel ply, and ZG for steel radial ply tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters from A to Z represent certified speed ratings ranging from 4.8 km/h to 300 km/h. Common speed ratings include: Q: 160 km/h; H: 210 km/h; V: 240 km/h; W: 270 km/h; Y: 300 km/h. Rim specification: Indicates the rim size compatible with the tire for practical use, such as standard rim 5.00F.
Was this review help?
10
0
Share
NevaehMarie
08/10/25 10:48pm
I have extensive experience in car repairs. The tire model for the Mercedes-Benz E300 depends on the specific year and configuration. The standard version usually uses 245/45R18 or 225/55R17, meaning the tire width is 245mm, the aspect ratio is 45%, and the wheel size is 18 inches. This design is suitable for comfort and fuel efficiency. I recommend you first check the markings on the side of the tire, where the detailed size is indicated, or look at the information sticker near the driver's side door. Don't casually switch to non-original specifications—larger wheels affect fuel consumption, and narrower tires reduce handling. Safety comes first. If the tires are severely worn, replace them promptly at an authorized dealership to match the original factory recommendations and avoid misalignment. Remember, regular tire pressure checks can extend their lifespan—inspecting them once a month is a good practice.
Was this review help?
5
3
Share
Expand All
More Forum Discussions

How to Distinguish Vehicle Emission Standards?

Cars' emission standards can be distinguished by their production year. Vehicles produced before 2011 are generally China II or China III standards. Cars produced after 2011 are mostly China IV or China V standards, while those manufactured in 2019 are typically China VI standard. Here are methods to check a vehicle's emission standard: 1. Environmental Protection Compliance Label: Check the back of the car's environmental protection compliance label sticker to easily view the emission standard. 2. Vehicle Certification: On the first page of the vehicle certification document, there is an emission standard description. It's not directly written as China X, but rather a string of characters. You can search online for the meaning of this character string. 3. Vehicle Management Office: Take the vehicle registration certificate to the local vehicle management office for inquiry. You can query using either the original or a copy.
7
2
Share

Why Was the Honda Crosstour Discontinued?

Honda Crosstour was discontinued due to poor sales. Below are the specific reasons for its discontinuation: 1. Pricing: The Crosstour's price range offered numerous luxury brand alternatives, while Honda's brand appeal couldn't match them, resulting in low sales. 2. Fuel Consumption: With a relatively large displacement, the Crosstour had high fuel consumption. The 2.4L model's owner-reported range was 9.26-12.26L/100km, averaging 10.76L/100km. The 3.5L model averaged 9.95-13.20L/100km, typically requiring 11.5L/100km. 3. Styling: As a crossover model (essentially half-SUV), its fastback design resembled BMW X6 but compromised rear-seat space. The unconventional appearance wasn't widely accepted.
9
1
Share

When does the manual self-cleaning of Great Wall Fengjun 5 activate?

Great Wall Fengjun 5's manual exhaust self-cleaning will automatically activate during normal vehicle operation. Maintaining the engine speed at 2000 RPM will enable the system to automatically clean carbon deposits from the exhaust. Below are specific details about the Fengjun 5: 1. Engine Type: The Fengjun 5 is a pickup truck under the Great Wall brand, equipped with a 2.4L naturally aspirated engine that delivers a maximum torque of 230 Nm, paired with a 5-speed manual transmission. 2. Body Dimensions: The Fengjun 5 measures 5095mm in length, 1800mm in width, and 1740mm in height, with a wheelbase of 3050mm. It features a front-engine, rear-wheel-drive configuration. 3. Suspension System: The vehicle is equipped with a double-wishbone independent front suspension and a leaf spring non-independent rear suspension, with tire specifications of 235/70R16.
10
2
Share

Can I Paint Directly Without Applying Primer Putty?

Painting directly without applying primer putty is also possible. Here are the relevant explanations: Reasons for applying primer putty: Applying primer putty serves as a base coat, ensuring uniform color for models that have undergone seamless processing, sanding, or modifications, thereby preventing color differences caused by overly thin paint application. In fact, this can be compensated by applying thicker coats of paint without primer putty. However, the MAX technique generally requires primer putty application. Benefits of primer putty: Another advantage of primer putty is enhancing paint adhesion and preventing color fading. However, this is not absolute—applying primer putty doesn't guarantee no fading, nor does skipping it necessarily cause fading. Ultimately, applying a protective topcoat provides the most assurance.
16
3
Share

Beijing Motorcycle Restricted Areas?

The motorcycle traffic restrictions in Beijing are as follows: 1. Restricted hours: On Chang'an Street (from Xinxing Bridge to Guomao Bridge), motorcycles are prohibited from 7:00 to 20:00. 2. Main road restrictions: Motorcycles are prohibited on the main roads of the 2nd, 3rd, 4th, and 5th Ring Roads at all times. 3. License plate restrictions: On roads within the 4th Ring Road (excluding auxiliary roads), motorcycles with Jing B license plates are prohibited. 4. Out-of-province restrictions: Motorcycles from other provinces, autonomous regions, or municipalities are prohibited from entering roads within the 6th Ring Road (excluding the 6th Ring Road) at all times. Additional information: For other motorcycle restrictions on specific roads, please refer to the road signs. Violations of the above restrictions will result in a fine of 100 yuan and 3 penalty points. Both riders and passengers are required to wear safety helmets.
14
4
Share

What is the reason for not feeling the car shake during semi-engagement of the test vehicle?

The reason for not feeling the car shake during semi-engagement of the test vehicle is the uneven distribution of positive pressure between the driving and driven discs. Here are the relevant explanations: 1. Clutch: When the test vehicle does not shake during semi-engagement, it causes the clutch to remain in a semi-friction state during separation. Over time, the clutch steel plate will deform. A broken clutch damping spring can also cause shaking. Many clutches often have poor sealing and heat dissipation, making them more prone to high temperatures during prolonged friction. Under high temperatures, the flywheel and pressure plate are more likely to deform. 2. Precautions: If the clutch shakes slightly during semi-engagement, it can be ignored. If the shaking is very severe, even on flat roads, it is recommended to replace the clutch disc, pressure plate, or flywheel, but this should be determined after disassembly and inspection.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.