What is the tire model for the Mercedes-Benz E-Class?

1 Answers
Annie
07/30/25 3:56am
Mercedes-Benz E-Class tires come in the following specifications: 1. 245/45R18; 2. 245/40R19; 3. 275/35R19. Among these, most 2017 Mercedes-Benz E-Class models use the 245/45R18 specification, while the other two are less common. Here is additional information: 1. Taking 245/45R18 as an example, the specifications mean: 245 indicates the section width (mm), 45 represents the aspect ratio, R stands for radial tire, and 18 denotes the diameter (in). 2. Most Mercedes-Benz E-Class tires are from the Pirelli brand, which is more wear-resistant, quieter, and more durable compared to other tire brands.
Was this review help?
19
4
Share
More Forum Discussions

What are the wheel specifications for the Volkswagen Golf?

The original factory wheels for the Golf 6 are 16-inch aluminum alloy rims with a bolt pattern of 5X112 and a center bore of 57.1. If replacing, pay close attention to the model specifications. Wheel and tire compatibility: Do not blindly increase wheel size. Some people upgrade wheels to enhance vehicle performance, but with the same tire outer diameter, larger wheels require wider and flatter tires. Consider the three key measurements: This means you can't simply choose a wheel design based on personal preference—you must also consult a technician to ensure these three measurements are suitable. Select the shape based on needs: Complex, intricate wheel designs may look aesthetically pleasing and high-end, while simpler rims can appear sporty and clean.
13
1
Share

Can hybrid vehicles get blue license plates?

Hybrid vehicles can get blue license plates. If it is a plug-in hybrid electric vehicle, then a green new energy license plate is required. More information about hybrid vehicles is as follows: Hybrid electric vehicles: a combination of fuel (gasoline, diesel) and electric energy, using an electric motor as an auxiliary power source to drive the vehicle. This is a complementary technology that can also be considered as integrated innovation. Taking mainstream hybrid technology as an example, the main power source is the engine, supplemented by a second power source - the battery. The combination of these two achieves energy savings. The electric motor assisting the engine can provide strong and smooth power during normal driving. During starting and acceleration: with the assistance of the electric motor, fuel consumption can be reduced. Simply put, compared to a vehicle of the same size, the fuel cost is lower. Therefore, owners can enjoy stronger starting and acceleration while achieving a higher level of fuel economy.
11
0
Share

Why does an electric car show power but not move?

Electric car showing power but not moving may be a controller issue. Below is relevant information about electric vehicles: Introduction: Electric vehicles (BEV) refer to vehicles that use on-board power sources as their driving force, with electric motors driving the wheels to meet all requirements of road traffic and safety regulations. Types: There are mainly three categories of electric vehicles: pure electric vehicles, hybrid electric vehicles, and fuel cell electric vehicles. Power source: Provides electrical energy to the driving motor of electric vehicles, and the motor converts the electrical energy from the power source into mechanical energy. The most widely used power source is lead-acid batteries, but with the development of electric vehicle technology, lead-acid batteries are gradually being replaced by other batteries due to their low energy density, slow charging speed, and short lifespan.
11
4
Share

Where is the washer motor fuse located in the Santa Fe?

The fuse box of the Hyundai Santa Fe is located under the cover panel at the lower left side of the driver's seat. Open the cover to access it. Fuse replacement procedure: Turn off the vehicle and disconnect all power sources. If equipped with a mechanical key, remove it. Locate the corresponding position and use a small pry tool to open the protective cover. Component information can be found on the inner side of the fuse box. Use a test light to check whether the fuse is blown. If damaged, remove it with tweezers and replace it. The new fuse must match the old one in size, color, and all specifications. If the component still doesn't function after replacement, seek professional repair immediately. Important fuse precautions: Installing fuses of different specifications in the same position may cause fire. Never replace with a fuse exceeding rated current as it may burn out components. Never attempt to repair damaged fuses. Never use metal strips as fuse substitutes.
7
5
Share

What does SVC mean in car audio?

Car audio SVC stands for Speed-sensitive Volume Control, which is a button for adjusting the audio system. Here are the specific details about car audio systems: Audio Source: Cars provide Bluetooth, WIFI, and AUX interfaces as connection methods for audio sources such as mobile phones or players. Among these, the AUX interface offers higher quality or even lossless connection, so it is recommended to use the AUX interface when playing music. Speakers: A car's speakers include tweeters and woofers, and the sound quality and effects depend on the number and level of the speakers. Lower-end cars may have only two speakers, while high-end cars can feature over a dozen speakers for surround sound. Speaker brands vary widely, with premium options including Burmester and Harman Kardon. Amplifier: Different tones have different frequencies. The amplifier's role is to reproduce these frequency ranges, and the more powerful the amplifier, the wider the frequency range it can reproduce. Therefore, the quality of music playback is partly determined by the amplifier.
7
2
Share

Why can't the headlights of Mercedes-Benz A160 be turned off?

The headlights remain on and cannot be turned off because the automatic mode is activated. How to turn it off: "Auto" represents the automatic mode. Turn the switch to "0" or "off" to deactivate it. Function of automatic headlights: When the light dims during driving, the headlights automatically turn on, and they turn off when the light becomes brighter. The working principle of automatic headlights relies on a photosensitive sensor, which is usually located on the car's front dashboard or the top of the windshield. When the photosensitive sensor detects sufficient light, it remains in an open circuit state, keeping the headlights off. If the sensor detects insufficient light, the photosensitive material emits an electrical signal, automatically turning on the headlights without manual intervention.
11
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.