What is the tire model for the JAC Refine S3?

1 Answers
LaAdelyn
07/30/25 10:14am
There are two specifications for the original tires of the Refine S3: 185/65-R15 and 205/55-R16. The specific introduction of car tires is as follows: 1. Tires are one of the most important components of a car: Their main function is to support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions. 2. Tires can transmit traction and braking torque: Ensure good adhesion between the wheels and the road surface to improve the car's power performance, braking performance, and passability; Together with the car suspension, they mitigate the impact received during driving and attenuate the resulting vibrations. 3. Tires can prevent car parts from severe vibrations and early damage: Adapt to the high-speed performance of the vehicle and reduce driving noise, ensuring driving safety, handling stability, comfort, and energy-saving economy.
Was this review help?
4
4
Share
More Forum Discussions

Where is the Roewe CVT transmission produced?

The Roewe CVT transmission is produced in Nanjing and is independently developed by SAIC. The CVT transmission in the Roewe i5 can simulate 8 gears, offering lower costs and better fuel efficiency. The Roewe i5 is equipped with two types of engines: a 1.5-liter naturally aspirated engine and a 1.5-liter turbocharged engine. Below are the details of these two engines: 1. 1.5-liter turbocharged engine: Maximum power is 124 kW, maximum torque is 250 Nm, maximum power speed is 5500 rpm, and maximum torque speed ranges from 1700 to 4300 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with a 7-speed dual-clutch transmission. 2. 1.5-liter naturally aspirated engine: Maximum power is 88 kW, maximum torque is 150 Nm, maximum power speed is 6000 rpm, and maximum torque speed is 4500 rpm. This engine is equipped with DVVT technology and uses an aluminum alloy cylinder head and a cast iron cylinder block. It is paired with either a 5-speed manual transmission or a CVT transmission.
11
5
Share

How to Start the Atenza When the Key Fob Battery is Dead?

When the Atenza key fob battery is dead, press the button on the side of the remote key to eject the mechanical key, then use the mechanical key to open the car door. After entering the vehicle, place the remote key near the start button; the induction coil inside the key can communicate with the vehicle's computer to allow ignition and starting. Below is some relevant information about the Atenza: 1. Introduction: The Atenza is Mazda's new generation mid-to-high-end sports sedan flagship model, developed under the philosophy of "breaking conventions, starting from scratch." The Atenza continues the design of the imported Mazda ATENZA. 2. Configuration: As Mazda's new generation flagship model, one of the Atenza's standout features is the application of Mazda's SKYACTIV technology. Compared to traditional naturally aspirated engines, the Atenza's SKYACTIV engine boasts a high compression ratio of 13:1, improving fuel economy and torque by 15% each.
17
3
Share

What is the name of a car that looks very similar to the Accord and is also from the Honda series?

There is a model in the Honda series that closely resembles the Accord, and this car is called the Honda INSPIRE. Below is a brief introduction to the Honda INSPIRE: 1. Exterior: The Dongfeng Honda INSPIRE features Honda's family-style exterior design, with minimal differences between the high-end and low-end versions. The most noticeable distinctions between the high-end and low-end models are the halogen high beams and wheel rim styles. Even the base model boasts a front-end presence and refinement that does not lag behind other models in the series. The low-end model comes with LED low beams and halogen high beams, while the other two models are equipped with full LED headlights as standard. LED front fog lights are standard across the entire lineup. 2. Interior: The overall design of the Dongfeng Honda INSPIRE leans towards the ordinary, but the craftsmanship is relatively refined. The steering wheel, being the most frequently touched part of the interior, stands out. The base model's steering wheel lacks leather wrapping and cruise control, which significantly impacts the perceived quality and convenience inside the cabin. 3. Powertrain: The entire lineup is powered by a 1.5T turbocharged engine, delivering a maximum horsepower of 194 HP and a maximum torque of 260 Nm. The transmission is a CVT (continuously variable transmission), identical to the powertrain found in the Accord. The suspension setup consists of a front MacPherson strut and a rear multi-link independent suspension.
12
0
Share

What Octane Gasoline Should a Magotan Use?

The Magotan is recommended to use 95 octane gasoline. Under special circumstances, 92 octane gasoline can also be used, but it is important to control the speed and avoid prolonged high-speed driving or climbing steep slopes, as different gasoline grades have varying octane levels and anti-knock properties. Generally, the appropriate gasoline grade for a vehicle should be used, which is usually indicated on the inside of the fuel tank cap. Whether it's 92 or 95 octane, the number represents the gasoline's anti-knock performance. A higher octane number indicates better anti-knock performance, but it does not necessarily mean better quality, contrary to the common belief that higher octane fuel is always superior. 92 and 95 octane gasoline have different octane values and should not be mixed. Mixing these two types of fuel can lead to incomplete combustion in the engine, resulting in a buildup of combustion residues. Occasional mixing is not highly harmful, but the tank should be emptied before refueling with the correct octane. Frequent mixing can cause issues such as clogged fuel injectors, severe carbon deposits, and abnormal fuel consumption.
5
2
Share

What Time Are Private Cars Prohibited from Entering the Highway?

Highway, private cars are prohibited from driving between 2:00 AM and 5:00 AM. The following is relevant information about driving on the highway: 1. Introduction to highways: Highway refers to high speed, compared to medium speed and low speed. In an environment where low speed is mainstream, low speed is normal or regular speed, while in an environment where medium speed is mainstream, medium speed is normal or regular speed. 2. Precautions for driving on the highway: When driving on the highway, it is necessary to maintain a safe distance from the vehicle in front. When the speed is above 100km/h, keep a distance of more than 100 meters. There are distance confirmation signs on the highway, through which the distance can be confirmed. Stay away from trucks. When driving at high speed, do not drive side by side with trucks, nor follow behind trucks. Try to overtake trucks. Stay in the middle lane. The leftmost lane on the highway is the overtaking lane, while large trucks generally stay in the rightmost lane.
19
3
Share

How to Seal a Leaking Diesel Fuel Tank?

Diesel fuel tank leaks can be welded, but if you prefer to seal it, first apply soap firmly to the leak point to prevent further leakage. Then, spread AB adhesive on gauze and cover the leaking area. Below is relevant information about diesel fuel tanks: Diesel fuel tanks are used to store diesel, with the number and capacity varying by vehicle model. The expansion space above the highest liquid level line in the tank exceeds 5% of the total volume to prevent fuel expansion due to heat absorption, which could cause fuel supply system failures. The distance between the tank's return pipe fitting and the intake pipe is relatively large to avoid most of the return fuel being drawn into the intake pipe. The intake pipe's suction point is positioned 17cm above the bottom of the Cummins tank to prevent water and sediment at the bottom from being drawn into the intake pipe. The diesel tank's bottom is equipped with a drain plug for periodic removal of accumulated sediment and water. The fuel filler cap at the top of the diesel tank has a ventilation device to maintain normal working pressure inside the tank during diesel engine operation and to prevent dust and water from entering the tank.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.