What is the tire model for the Atenza 2.0 version?

1 Answers
AndersonAnn
07/30/25 4:07am
The tire specification for the Atenza 2.0 version is 225/55R17. The first number 225 indicates the tire width is 225MM, 55 represents the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width. The letter R stands for radial tire, and 17 denotes the rim diameter is 17 inches. The Toyota Yaris L has a top speed of 226km/h and a fuel consumption of 7.1L per 100km. In addition to the model, the following common data is also marked on the tire: Tire cord material: Represented by Chinese Pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: Shows the rim size compatible with the tire for practical use, such as 'Standard rim 5.00F'.
Was this review help?
18
4
Share
More Forum Discussions

What is the purpose of the L gear?

The L gear in a car stands for L—Low, which is the low gear. It mainly serves the following purposes: 1. When the car is going downhill, it uses the engine's power for braking, preventing the driver from having to press the brakes for a long time, which could overheat the brake pads and cause danger. 2. This gear keeps the transmission in 1st gear without shifting up, making it useful for situations like driving on slopes. Generally, automatic transmission cars have six gear positions, arranged from top to bottom as: P, R, N, D, 2, L. P: Parking gear. When the car is parked and not in use, the gear is in this position, locking the wheels mechanically to prevent rolling. R: Reverse gear, used for reversing. N: Neutral gear. Used for temporary stops (e.g., at a red light). D: Drive gear, also known as the forward gear. As the name suggests, it is used when moving forward.
14
2
Share

What does the flashing of Land Cruiser 4lo mean?

Land Cruiser 4lo flashing indicates that the vehicle has entered the low-speed cruise system, which is the automatic climbing function. Press the brake and shift into N gear, then move the first of the four levers in front of the central armrest from left to right upwards, and the flashing will stop after three seconds. Here is more information about the Land Cruiser: 1. In terms of comfort features, the Land Cruiser is equipped with new features such as 4-zone independent automatic air conditioning, smart key, and an 8-inch multi-function information display. 2. The front suspension has been changed from a torsion bar type to a coil spring type suspension. 3. In terms of power, the Land Cruiser is equipped with a 4.6L-V8-1UR engine, with increased power, where the maximum power has been raised to 310 horsepower (228 kW), and the maximum torque has been increased to 460 Nm. The new engine shows significant improvements in both power and torque. 4. It features an active headrest design where the headrest can be moved to the neck to effectively reduce the impact force on the neck.
4
4
Share

What does the torque of a car refer to?

Automotive torque refers to the rotational force output from the crankshaft end of the engine. Here is more information about automotive torque: 1. Under fixed power conditions, automotive torque is inversely proportional to engine speed. The faster the speed, the smaller the torque, and vice versa, reflecting the car's load capacity within a certain range. 2. The greater the torque output, the greater the car's carrying capacity. The better the acceleration performance, the stronger the climbing ability. This means the car requires fewer gear shifts, and the wear on the transmission will be relatively reduced. When starting, the advantages of high torque are even more evident.
8
2
Share

What is the minimum ground clearance for a typical sedan?

The minimum ground clearance for a typical sedan ranges between 100mm and 150mm. Below are specific details about ground clearance: 1. The greater the ground clearance of a sedan, the better its off-road performance, but the worse its high-speed stability. 2. For ordinary family sedans, as long as there are no high slopes, deep pits, or obstacles on the road, a large ground clearance is generally not required. It is sufficient to ensure the comfort and stability of the vehicle. 3. Sports cars usually have a ground clearance of around 100mm. The low ground clearance in sports cars is designed to improve tire grip and enhance the car's speed and stability during high-speed cornering.
6
3
Share

Should the AC be turned on when using the car heater in winter?

In winter, the car's air conditioning does not need to have the AC turned on because the heater, which provides warm air, is required during this season. More information about the car is as follows: 1. The heater operates by converting the heat from the engine's coolant to produce warm air; 2. The AC button is for the air conditioning cooling function. Pressing this button activates the air conditioning compressor, with some models illuminating an indicator light on the button, while others display a prompt on the central control screen. If this switch is turned off, the car's air conditioning can only blow natural or warm air. During winter use of the air conditioning, since most vehicles now come with automatic air conditioning, turning on the air conditioning may automatically activate the AC function. The reason for this is: if the driver sets the air outlet direction to the front windshield, the defrost function will be activated, and the automatic air conditioning system will automatically turn on the AC switch. This is a normal phenomenon, as this design allows for the quickest removal of fog using cold air.
13
2
Share

How to Deal with Paint Stains on Car Paint?

Here are the methods to deal with paint stains on car paint: 1. Banana Oil: Also known as thinner, soak a towel with banana oil and gently wipe the paint spots to dilute the paint. It works well for cleaning paint stains, and finally rinse with clean water. However, banana oil is toxic, volatile, and somewhat corrosive, which may damage the car paint, so extra caution is needed when using it. 2. Gasoline: Gasoline can dissolve paint effectively with minimal corrosion. The steps are the same as with banana oil. 3. Alcohol: Paint can be removed by wiping with alcohol (industrial alcohol). Dip a soft cotton cloth in alcohol and gently wipe the paint stains. 4. Essential Balm: Essential balm can dissolve paint and can also be used to clean paint spots, with the same method as alcohol. 5. Asphalt Remover/Paint Thinner: Asphalt remover can also dissolve paint. Spray it evenly on the paint spots, wait for a while to let the paint soften and dissolve, then wipe with a towel and rinse with clean water.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.