What is the tire model for the 2017 Lavida?

2 Answers
McMadelyn
08/26/25 6:02am
2017 Lavida uses Hankook OPTIMO-k415 brand tires with the model number 205/55R16. How to distinguish tire models: Tire models can be identified by the data on the side of the car tire. Generally, the side of the tire will indicate the tire's width, aspect ratio, tire type, and applicable size. When purchasing tires, observe your tire's data before buying. Meaning of tire model numbers: A series of numbers is marked on the side of the tire. These numbers are separated, with the first three digits usually indicating the tire's width. Typically, tire widths range between 145 and 285, and different car engine displacements may also lead to variations in tire specifications.
Was this review help?
7
2
Share
BeckettFitz
09/08/25 8:42am
As a veteran driver with twenty years of experience, I can tell you that the tire specification for the Lavida 2017 model is typically 195/65 R15. These numbers indicate a tire width of 195 millimeters, a height that is 65% of the width, and a wheel rim size of 15 inches. I've driven many long-distance trips with it myself and found it to be very stable both in the city and on the highway, offering high comfort and fuel efficiency. However, the high-end version might use 205/55 R16, so it's best to check the vehicle manual for confirmation. The importance of tires cannot be overstated; severe wear or low tire pressure can lead to longer braking distances and even the risk of a blowout. I recommend checking the tire pressure once a month and choosing reputable brands like Michelin or Goodyear when replacing tires—safety first. Check the tread depth annually, and replace them immediately if it's below 1.6 millimeters. Usually, park in the shade to avoid sun exposure and prevent aging. Small tires are the cornerstone of driving safety.
Was this review help?
5
1
Share
Expand All
More Forum Discussions

Why does the Audi EPC light come on and then disappear?

Audi EPC light coming on and then disappearing is a condition caused by a fault in the electronic throttle control system. EPC: EPC stands for Electronic-Power-Control, which translates to electronic throttle control system. This is an important controller used to manage engine air intake and engine load. When issues arise, it cannot control engine speed and load, causing the vehicle to enter an emergency state, resulting in engine shaking and, in severe cases, stalling. EPC Light On: When the car's EPC light comes on, there can be various situations, such as faults in the intake system, like leaks or blockages; dirty throttle body, excessive carbon buildup; substandard fuel usage; abnormal cylinder pressure, poor operating conditions; or occasional faults leading to false alarms.
11
0
Share

Which Generation is the 2016 Toyota Camry?

2016 Toyota Camry is the 7th generation. The 2016 Camry comes with three powertrain options: a 2.5L hybrid, a 2.0L naturally aspirated engine, and a 2.5L naturally aspirated engine. The 2.5L hybrid powertrain delivers a maximum horsepower of 160 hp, the 2.0L naturally aspirated engine produces 167 hp, and the 2.5L naturally aspirated engine generates 184 hp. The 2016 Camry 2.5 hybrid is equipped with an E-CVT continuously variable transmission, while other models feature a 6-speed automatic transmission. In terms of suspension, the 2016 Camry has a front MacPherson strut independent suspension and a rear double-wishbone independent suspension.
10
0
Share

How to Deactivate the Anti-lock Braking System?

The anti-lock braking system (ABS) in most civilian vehicles cannot be deactivated. This system is enabled by default and remains on standby at all times unless a malfunction occurs. Whenever the vehicle shows a tendency to lock up, the ABS will intervene to prevent wheel lock. Usage instructions for the anti-lock braking system: 1. Keep the brake pedal firmly pressed to allow the ABS to function effectively; 2. The minimum following distance should not be less than 50 meters. When the speed exceeds 50 km/h, the minimum following distance should match the speed value; 3. Familiarize yourself with the ABS in advance and be prepared for and adapt to the brake pedal pulsation that occurs when the ABS is active.
1
1
Share

Benefits and Functions of Throttle Cleaning

The specific introduction to the benefits and functions of throttle cleaning is as follows: 1. Remove carbon deposits. The benefit of regular throttle cleaning is to remove carbon deposits, improve the precision of air intake and fuel injection, and enhance fuel efficiency. 2. Extend the engine's service life. Not cleaning the throttle for a long time will cause throttle opening errors and allow impurities in the air to enter the engine combustion chamber. 3. Function of the throttle. The throttle is a controllable valve that regulates the air entering the engine. After the air enters the intake pipe, it mixes with gasoline to form a combustible mixture, which then burns to generate power. The throttle is connected to the air filter at the top and the engine block at the bottom, and is known as the throat of the automobile engine.
5
3
Share

How many cylinders does the Vios have?

The Vios has four cylinders, with the model number 4NR-FE, a bore of 72.5mm, and a compression ratio of 11.5. It is equipped with a 1.3-liter naturally aspirated engine and a 1.5-liter naturally aspirated engine. The 1.3-liter naturally aspirated engine produces 99 horsepower and a maximum torque of 123 Nm, with the maximum torque achieved at 4,200 rpm and the maximum power at 6,000 rpm. This engine is paired with either a 5-speed manual transmission or a CVT transmission. The Vios has a wheelbase of 2,550mm, a length of 4,420mm, a width of 1,700mm, and a height of 1,490mm.
4
1
Share

What is the Function of a Seat Belt?

The function of a seat belt is to instantly tighten and secure the loose belt when a vehicle collision occurs or emergency braking is applied, preventing secondary collisions by firmly restraining the occupant in the seat. If the tightening force of the seat belt exceeds a certain limit, the force-limiting device will appropriately release the belt to maintain stable chest pressure. Methods for using seat belts: 1. The breaking load indicators for the belt, rope, and metal fittings; 2. The waist belt must be a single piece, with a width of 40 to 50mm and a length of 1300 to 1600mm; 3. The protective waist belt should be no less than 80mm in width and 600 to 700mm in length; 4. The safety rope diameter should be no less than 13mm.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.