···
Log in / Register

What is the tire model for Lincoln MKZ?

4 Answers
DelIsaac
07/29/25 7:36pm
The Lincoln MKZ has two tire models: 235/50R17 and 245/40R19. The first number, 235, represents the tire width of 235MM. The 50 indicates the aspect ratio of the tire section is 50%, meaning the section height is 50% of the width. The letter R stands for radial tire, and 17 represents the rim diameter of 17 inches. The Lincoln MKZ has a top speed of 186km/h and a fuel consumption of 4.8L per 100km. In addition to the model, the tire also displays the following common data: Tire cord material: Indicated by Chinese Pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters from A to Z represent certified speed ratings from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: Indicates the rim size compatible with the tire for practical use, such as "Standard rim 5.00F".
Was this review help?
16
4
Share
London
08/14/25 2:45pm
The tire specifications for the Lincoln MKZ are quite crucial, and I believe owners should be aware that they vary by year and trim. Common sizes include 235/50R17 or 245/45R18, especially for models from 2017 to 2020. The numerical code, such as 235, represents the tire width in millimeters, 50 is the aspect ratio indicating the sidewall height, R refers to the radial construction, and 18 is the wheel diameter in inches. I recommend not just relying on hearsay but directly checking the label on your door jamb or the owner’s manual to confirm, to avoid incorrect installation that could lead to handling imbalances. Additionally, when choosing tires, prioritize brands like Michelin or Bridgestone for durability and safety; check tire pressure monthly and maintain it around 35 psi, which can significantly extend tire life and even save a bit on fuel!
Was this review help?
19
1
Share
Expand All
DelIan
10/15/25 6:16am
When it comes to tire safety, the Lincoln MKZ's standard models like 225/55R17 or the larger 245/45R18, I must emphasize that the size must strictly match the vehicle's placard dimensions. Otherwise, it can affect braking distance and increase fuel consumption. I've seen accidents caused by owners using the wrong size, so checking the door label or manual is the first step. For winter, it's best to switch to snow tires of the same size to improve traction. In terms of maintenance, rotate the tires every 10,000 kilometers to prevent uneven wear; replace them when the tread is less than 3 millimeters—don't delay. This not only protects the suspension system but also ensures a safer and smoother drive.
Was this review help?
5
3
Share
Expand All
Gerald
11/28/25 7:06am
Finding the correct tire model for your Lincoln MKZ is straightforward: simply check the sticker on the driver's door pillar, which displays specifications like P245/45R18. Common sizes range between 17 to 18 inches. Once confirmed, purchase new tires and have them installed at a professional shop—never guess the model. I personally prefer Michelin or Goodyear brands for their stable performance and durability. Remember to maintain tire pressure around 35 psi and check it monthly to prevent issues. The whole process is quick, and handling it yourself as an owner brings peace of mind.
Was this review help?
13
0
Share
Expand All
More Forum Discussions

Can You Cross the Line in Parallel Parking?

No, crossing the line during parallel parking will result in a 10-point deduction. Below is relevant information about parallel parking: Introduction: Parallel parking is a component of the driving test's Subject 2, designed to assess a driver's ability to correctly park a vehicle on the right side of the road. The requirement is for the driver to park the vehicle in the right-side parking space without the wheels touching the lane boundary or parking space boundary. Notes: Adjust both side mirrors—lower the left mirror enough to see the left rear wheel, while the right mirror should just show the car body. Park the car 30cm-50cm away from the yellow line, remember to signal and check the mirrors, and slow down when you can see the wheels making contact with the ground.
14
3
Share

Can you stop at a traffic light in a variable lane?

You cannot stop at a traffic light in a variable lane. Below is a detailed introduction about variable lanes: Introduction to variable lanes: The liquid crystal indicator signs for variable lanes belong to traffic instruction signs. Before entering a variable lane, drivers should select the lane they need to drive in according to the instructions on these signs. They must drive according to the guiding lane, avoid left lanes where prohibited, obey prohibition signs, and must not run red lights. When the red cross-shaped light above the variable lane is on, motor vehicles are not allowed to enter the lane. When passing through the guiding lane at an intersection, drivers must follow the direction indicated by the guiding arrow. Correct driving method for variable lanes: To determine whether a variable lane is for turning or going straight, observe the sign above the lane. There will be an electronic sign above the variable lane. If it displays a straight arrow, it means the lane is currently for straight-through traffic, and left-turning vehicles are prohibited from entering. If it displays a left-turn arrow, it means the lane is for left turns, and straight-through vehicles are prohibited from entering. Variable lanes change between straight and left-turn directions during peak and off-peak hours, so always follow the signs when driving. Drivers should check the signs in advance when passing through these intersections to avoid entering the wrong lane.
9
2
Share

Is the Three-Way Catalyst Useful?

The three-way catalyst is useful. The main function of the three-way catalyst is to heat the catalytic converter using the exhaust gases emitted by the engine, then undergo a chemical reaction with the exhaust gases to convert toxic and harmful gases into harmless emissions such as water or carbon dioxide. How to determine the condition of the three-way catalytic converter: Visual inspection. Check the exterior of the three-way catalytic converter for any damage or discoloration. If there are scratches, cracks, etc., it is likely that the catalytic converter has been damaged. If there are noticeable gray spots in the center of the protective cover, severe discoloration, or purple marks on the shell, the catalytic converter may have suffered from overheating issues. Observe the engine's exhaust condition. Place your hand near the tailpipe outlet to feel the exhaust flow and check if the catalytic converter is clogged or if there are issues with poor exhaust flow. Another method is to open the air filter, remove the filter element, and observe if there is exhaust backflow during rapid acceleration, indicating poor exhaust flow. To test the condition of the TWC (Three-Way Catalyst), check if the secondary air injection pump is functioning properly. Use an infrared thermometer to assess. Compare the temperature difference before and after the TWC using an infrared thermometer. If the temperature difference between the inlet and outlet of the catalytic converter is less than 10°C, the TWC is likely damaged.
18
2
Share

How Heavy is a Tricycle?

Motorized tricycles have an approximate self-weight of 800 kilograms, while electric tricycles weigh around 50 kilograms. Below is a detailed introduction to tricycles: Overview: A tricycle is a combination of a rickshaw and a bicycle. Tricycles can be categorized into manual tricycles, electric tricycles, children's tricycles, and battery-powered tricycles. Electric Tricycle: Electric tricycles use high-capacity traction lead-acid batteries for strong power; they are equipped with high-quality DC motors that operate quietly and have a long service life; the speed control system employs stepless speed regulation, featuring a simple structure and easy operation. Motorized Tricycle: Motorized tricycles are powered by either gasoline or diesel engines. Compared to electric tricycles, they significantly increase power, enhance cargo capacity, and improve transportation efficiency. The downside is that fuel emissions can cause some environmental pollution, and operation requires relevant procedures from traffic authorities.
8
2
Share

Should You Turn on the Internal Air Recirculation When Using the Car Air Conditioner?

Whether to turn on the internal air recirculation when using the car air conditioner depends on the specific conditions inside your vehicle. Below are the differences between internal and external air recirculation in cars: External Recirculation: The function of external recirculation is to replenish fresh air. When external recirculation is activated, the air intake located at the firewall is opened by the air conditioning computer, and the vehicle's blower draws outside air through the micro-dust filter into the two heat exchangers (cooling and heating) inside the evaporator. The air processed by the heat exchangers is then blown out through the air vents. Internal Recirculation: In the internal recirculation mode, the airflow channel between the inside and outside of the vehicle is closed. Without the blower, there is no airflow circulation. When the blower is on, the air drawn in comes solely from inside the vehicle, creating an internal airflow cycle. Internal recirculation primarily serves to promptly and effectively block external dust and harmful gases from entering the vehicle, such as when driving through areas with smoke, dust, strong odors, or in dense traffic, preventing harmful exhaust emissions from preceding vehicles from entering the cabin.
19
3
Share

Why doesn't the electric car move after braking when power is applied?

Here are the reasons why an electric car doesn't move after braking when power is applied: Damaged electronic components: The Hall sensor inside the accelerator (throttle) is damaged. The accelerator is crucial for electric cars, and the Hall sensor is vital for the accelerator. Therefore, damage to the Hall sensor will directly cause the vehicle to have no response when stepping on the accelerator, even if there is power. To check if the Hall sensor is damaged, you can start from the sensor's rated voltage and current, verifying whether these two factors are within the specified range. Values greater or smaller than this range will cause the Hall sensor to malfunction. Brake system failure: The brake power-off system is stuck or not reset, causing the brake system to keep working. In this case, the accelerator may appear "unresponsive." Alternatively, the control circuit may be open, or the controller may have a fault. The controller starts working after receiving the signal from the accelerator. If the controller is short-circuited or faulty, the accelerator naturally won't respond. Motor failure: Motor failure directly causes the vehicle to stop working, and stepping on the accelerator is useless. Identifying motor failure is simple. When the motor fails, it is usually accompanied by smoke, sparks, overheating, etc. Observing any of these signs indicates motor failure. In this case, you should take the car to a repair shop for servicing.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.