What is the tire model for Hyundai Elantra?

2 Answers
DeClaire
09/06/25 4:36am
The Hyundai Elantra 1.6L uses Nexen Npriz AH8 series tires with the specification 205/55/R16. These tires prioritize comfort and grip during daily driving. The wider the tire section, the greater the friction between the tire and the ground, resulting in stronger grip. Below is relevant information about tire pressure: 1. Both over-inflation and under-inflation of tires can affect their lifespan. Winter tire pressure can be slightly higher than summer tire pressure. The recommended summer tire pressure is between 2.2-2.5 bar, while winter tire pressure should not exceed 2.8 bar. Adjust the pressure appropriately based on load conditions. 2. Insufficient tire inflation pressure can lead to excessive tire wear, poor vehicle control, reduced fuel economy, and may also cause wheel deformation. Therefore, always maintain tire inflation pressure within the specified range. 3. Over-inflation of tires can result in uncomfortable rides, excessive wear in the center of the tire tread, and increase the risk of tire damage on hazardous road surfaces.
Was this review help?
10
0
Share
DelGiselle
09/18/25 4:30am
I've been driving a Hyundai Accent for over three years, and the standard tire size for this car is generally 145/70 R13, with Bridgestone or JK Tyres being the common OEM brands. As a daily driver, I find this size particularly suitable for urban road conditions: compact for fuel efficiency, agile in turns, and providing a smooth ride. The original tires that came with the car were 145/70 R13 76T, which proved quite durable; I recommend regular checks on tire pressure and tread wear, say once a month, as too low pressure can compromise braking safety. For those who frequently drive long distances or on highways, opting for tires with better wear resistance is more cost-effective; when replacing tires, avoid arbitrarily changing sizes—going too large may lead to body mismatch, accelerated wear, and safety risks. In rainy conditions, choose tires with deeper tread patterns to enhance grip. For the Accent as a compact car, the key to tire selection lies in balancing performance and cost.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

What is the difference between parking lights and hazard warning lights?

Parking lights and hazard warning lights serve different purposes. Below are the relevant introductions about their functions: Function of hazard warning lights: Hazard warning lights flash at regular intervals, which are the turn signals we commonly use, with a yellow color; while parking lights remain constantly on, located at the widest and highest positions around the vehicle body, with white at the front and red at the rear. The full name of hazard warning lights is 'hazard warning flashers', also commonly known as 'emergency flashers'. They are signal lights on a car, mainly used to alert other vehicles and pedestrians that the car is in a special situation, prompting them to give way in time. Function of parking lights: Parking lights are warning lights that provide safety alerts to the surrounding environment, such as vehicles and pedestrians, when the car is temporarily parked and turned off, to indicate the car's position and display its outline.
4
2
Share

How to turn on the heating in an Audi A3?

Audi A3 semi-automatic air conditioning does not require turning on the AC switch. Adjust the temperature control switch to the heating mode, and with the car running, turning on the fan will blow warm air. For automatic air conditioning, simply adjust the temperature directly. Here is more information about the Audi A3 air conditioning system: 1. The Audi A3 is equipped with either manual or automatic air conditioning depending on the model configuration. The automatic air conditioning function includes automatic adjustment of interior temperature and humidity, automatic control of air recirculation and supply modes, as well as operation modes and air volume control. 2. The electronic control unit will operate the air conditioning system automatically based on the settings made by the driver or passengers via the buttons on the air conditioning display control panel. It adjusts the air supply temperature and speed in real-time according to signals from various sensors to maintain the optimal interior air environment. The electronic control unit can also change the temperature distribution inside the car by selecting different air outlets according to climate changes.
19
3
Share

What Causes Car Shaking Between 40-50 MPH?

If your car is shaking, first check the tire pressure and wheel balance. It could also be an issue with the chassis suspension. It is recommended that the owner take the car to a 4S shop for a full inspection. Below is more information about car shaking: 1. Shaking during startup: The main reason is incomplete fuel combustion, resulting in insufficient power. Low ignition energy requires more throttle input to meet power demands during startup, especially when fuel and lubricant temperatures are low. Over time, the spark plug gap gradually increases, leading to decreased ignition energy and poor fuel atomization, which causes the car body to shake. 2. Idle shaking: Causes of idle shaking include severe engine carbon buildup, ignition system problems, unstable oil pressure, and aging engine components. 3. High-speed shaking: The most common causes are tire-related issues such as incorrect tire pressure (too high or too low), abnormal tire wear, rim deformation, shock absorber failure, tire imbalance, and significant wheel alignment deviations.
16
2
Share

What engine is used in the Zotye Z300?

Zotye Z300 uses the 4A91S engine. The following are the specific details of the 4A91S engine: 4A91S engine parameters: 1.5L 4A9 series engine, with a maximum power of 86kw (117 horsepower) and a maximum torque output of 141N.m. Performance characteristics: The 4A91S all-aluminum engine is reliable and stable in performance, featuring MIVEC (continuous variable valve timing) technology, high fuel utilization, low fuel consumption, and other advantages. It was developed by Mitsubishi and manufactured by Shenyang Aerospace Mitsubishi. The Mitsubishi 4A9 series engine not only has variable valve timing technology but also uses lightweight aluminum-magnesium alloy pressure-cast cylinder blocks, equipped with reverse-mounted exhaust manifolds and independent ignition devices, significantly enhancing the engine's lightweight and performance optimization, improving the engine's efficiency.
10
1
Share

Are There Rear-Wheel Drive Mercedes-Benz Sedans?

Mercedes-Benz sedans do have rear-wheel drive models. Taking the Mercedes-Benz C200 as an example, it is a rear-wheel drive coupe. Advantages of Rear-Wheel Drive: First, under normal road conditions, rear-wheel drive cars have an inherent advantage during acceleration. Since the engine is located at the front, the vehicle's center of gravity shifts backward during startup, significantly enhancing the traction of the rear wheels as the driving wheels. A reasonable weight distribution ratio is more conducive to acceleration and improves ride comfort. Characteristics of Front-Wheel Drive: Lower manufacturing cost is a primary consideration for manufacturers when designing and producing cars. Compared to rear-wheel drive, front-wheel drive designs are less expensive in terms of both design and assembly. Front-wheel drive cars do not require a rear drive shaft or rear gearbox, and their transmission systems differ from those of rear-wheel drive vehicles, featuring fewer and more centralized components. This makes it easier to arrange other parts of the car, such as the braking system, fuel lines, and exhaust system, in the lower section of the vehicle.
20
5
Share

Where is the optimal position for the oil dipstick on the new Sagitar?

By observing the oil adhered to the dipstick, you can determine the highest oil level in the engine. The most ideal position for the oil level is midway between the MIN and MAX marks, indicating that the engine oil quantity is perfectly suitable. Method for checking the oil dipstick: After leaving the car overnight or parked for half an hour, ensure you accurately identify the correct oil level position. When checking the dipstick, do not rely on just one side; inspect both sides and use the lower reading as the accurate measurement. If uncertain, wipe it clean and recheck. Relying on only one side may create a false impression due to oil sticking to the dipstick from the tube wall. More oil is not necessarily better: A higher oil level actually increases engine resistance (since the crankshaft continuously agitates the oil in the oil pan for splash lubrication). Ideally, maintaining the oil level slightly below the middle position minimizes engine resistance and fuel consumption while ensuring stable lubrication performance.
8
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.