What is the tire model for Chery A3?

1 Answers
MacCassidy
07/29/25 5:31pm
The tire model for Chery A3 is 205/55R16. The first number 205 represents the tire width of 205MM, 55 indicates the aspect ratio of the tire section is 55%, meaning the section height is 55% of the width, and 16 stands for the rim diameter of 16 inches. The letter "R" in the middle denotes a radial tire. The tires used on Chery A3 are Maxxis, manufactured by Cheng Shin Rubber (China) Co., Ltd., a Taiwanese-funded enterprise. The spare tire is a non-full-size one. If you want to replace the tire yourself, you can follow the steps below: Take out the spare tire and jack, place the jack under the frame of the tire to be replaced, ensuring the jack touches the metal part of the frame; Raise the jack until it supports the car. The jack should be positioned under the vehicle, check and ensure the jack is at a right angle to the ground; Remove the hubcap, loosen the nuts counterclockwise. Do not completely loosen the nuts, just enough to eliminate resistance. When loosening the nuts for the first time, keeping the tire on the ground ensures that the nuts rotate instead of the tire; Turn the nuts counterclockwise until they come off. Repeat this step for all lug nuts, then completely remove the nuts; Place the new tire on the hub, carefully align the tire rim with the wheel bolts, install the lug nuts, and hand-tighten them until all nuts are concealed. At this point, the tire replacement is complete. In addition to the model, the tire also displays the following common data: Tire cord material: represented by Chinese pinyin, such as M-cotton cord, R-rayon cord, N-nylon cord, G-steel cord, ZG-steel radial cord tire. Speed rating: indicates the maximum speed at which the tire can carry a specified load under specified conditions. Letters A to Z represent the certified speed ratings of tires from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h; Rim specification: indicates the rim specification compatible with the tire for practical use, such as standard rim 5.00F.
Was this review help?
12
0
Share
More Forum Discussions

What Causes the Malibu to Display Reduced Engine Power?

The Malibu displays reduced engine power due to the following reasons: 1. Excessive carbon buildup in the engine, leading to insufficient air intake and affecting power output; 2. Blocked intake system; 3. Obstructed fuel supply system; 4. Decreased spark plug efficiency; 5. Overheating coolant temperature; 6. Engine knocking occurring in the cylinders; 7. Excessive oil temperature in the engine. Taking the 2021 Malibu as an example, its front suspension is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 169ps, a maximum power of 124kW, and a maximum torque of 250Nm, paired with a 9-speed automatic transmission.
9
0
Share

What Does the Automotive Transmission System Consist Of?

Automotive transmission system consists of clutch, gearbox, universal transmission device, final drive, differential, and half-shafts. The functions of the transmission system are: 1. To ensure the vehicle has the necessary traction and speed under various driving conditions, and to coordinate the changes between traction and speed; 2. To provide the vehicle with good power performance and fuel economy; 3. To enable the vehicle to reverse and allow the left and right drive wheels to adapt to differential requirements; 4. To smoothly engage or completely and quickly disengage power transmission as needed. The composition and layout of the automotive transmission system vary depending on the type of engine, its installation position, and the intended use of the vehicle.
16
3
Share

How to Fold Down the Rear Seats in a Car?

To fold down the rear seats in a car, follow these steps: 1. Open the car door and locate the latch for the back seat. 2. Pull the handle and recline the rear seat at the appropriate angle. 3. Some seats can be folded; pull the black strap under the trunk seat backward, then lift the seat upward. The rear seats can be folded in the following proportions: 1. One-third fold-down. 2. Two-thirds fold-down. 3. Full rear seat fold-down. Proportional fold-down of the rear seats means that two or one of the three rear seats can be folded, meeting both the needs of rear passengers and cargo storage. This not only expands the trunk space but also enhances the flexibility of usage.
14
3
Share

What Causes Brake Vibration When Braking at High Speeds?

Car brake vibration when braking at high speeds is caused by: 1. Uneven brake disc surface with excessive radial runout; 2. Significant deviation in wheel alignment data; 3. Excessive or insufficient tire pressure; 4. Abnormal tire wear; 5. Rim deformation. The maintenance methods for brakes include: 1. High-temperature protection to prevent brake system corrosion, avoid brake pad seizure due to high temperatures, and eliminate brake squeal; 2. Regular replacement of brake fluid; 3. Cleaning oil stains, dirt, and friction dust from brake discs, brake drums, and any components to ensure good heat dissipation of the brake discs; 4. Regularly checking the thickness of brake pads or brake shoes.
16
3
Share

How Many Liters of Engine Oil Does a Land Rover Range Rover 5.0 Require?

Land Rover Range Rover 5.0 requires approximately 9 liters of engine oil. The functions of engine oil are: 1. To alleviate friction and high temperatures; 2. To reduce gas leakage and prevent external pollutants; 3. To prevent contact between water, air, acidic harmful gases, and parts; 4. To buffer the pressure rise in the engine cylinder port; 5. To flush away dirt generated on the working surfaces of parts. Taking the 2021 Land Rover Range Rover 5.0 as an example, its body structure is a 5-door, 5-seat SUV, with body dimensions of: length 5000mm, width 2073mm, height 1869mm, a wheelbase of 2922mm, a fuel tank capacity of 104 liters, and a trunk capacity ranging from 707 to 1694 liters.
1
3
Share

Where is the engine number of Mazda CX4 located?

Mazda CX4's engine number is located on the cylinder block on the intake side of the engine. The function of the engine is to convert the thermal energy of gasoline or diesel into mechanical energy by burning and expanding the gas in the sealed cylinder, thereby pushing the piston to perform work. Engine maintenance items include: 1. Regularly change the engine oil and oil filter; 2. Keep the crankcase well ventilated; 3. Regularly clean the crankcase; 4. Regularly clean the fuel system; 5. Regularly maintain the radiator; 6. Maintain and clean the fuel system. Taking the 2021 Mazda CX4 as an example, its body structure is a 5-door, 5-seat SUV with body dimensions of: length 4637mm, width 1855mm, height 1524mm, a wheelbase of 2700mm, a fuel tank capacity of 45 liters, and a curb weight of 1493kg.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.