···
Log in / Register

What is the tire model equipped on the Land Rover Freelander 2?

4 Answers
HadleyFitz
07/29/25 3:05pm

The Land Rover Freelander 2 is equipped with Goodyear 235/65R17 tires. Tires are one of the most important components of a vehicle, supporting the entire weight of the vehicle, bearing the load of the car, and transmitting forces and moments in other directions. They prevent severe vibrations and early damage to vehicle components, adapt to the high-speed performance of the vehicle and reduce noise during driving, ensuring driving safety, handling stability, comfort, and energy efficiency. Below is some relevant information about tires: 1. Tire lifespan: The wear life of tires is between 30,000 to 50,000 kilometers. If the tires have not reached the wear limit or mileage but have been in use for 5 years or have developed a large number of cracks on the sidewalls, they should be replaced. 2. Tire material: The main body of a tire is rubber. The maximum storage and anti-aging time for rubber, from natural latex to ethylene-propylene and nitrile, does not exceed 10 years. The average service life of various rubber products in use is 3-5 years.

Was this review help?
2
2
Share
JasonMarie
08/13/25 7:45am

The tire model for the Freelander 2 depends on the specific year and configuration, as there are differences between batches. My 2012 high-end version uses 235/55 R19 Continental tires, which provide excellent stability on highways. A friend's base model, however, has 235/65 R17 Pirelli tires, offering better off-road performance. This difference is mainly due to the wheel size—larger wheels with thinner tires look stylish but can be bumpier. To confirm your car's tire model, the most accurate method is to check the tire pressure label on the door frame, which shows the original specifications. When replacing tires, avoid changing sizes arbitrarily, as it can affect speedometer accuracy and the four-wheel-drive system. Also, note that the spare tire is typically a non-full-size T155/90 D18, suitable for emergencies but not long-term use.

Was this review help?
11
1
Share
Expand All
VonJoanna
10/11/25 6:25am

After researching many tire configurations for the Freelander 2, I found there are mainly three common types. Most base models come with 235/65 R17 tires, which have thick sidewalls suitable for rough roads. The mid-to-high trim levels most commonly use 235/60 R18 tires, striking a balance between comfort and handling. The top trim often features 235/55 R19 performance tires. When helping others replace tires, I pay special attention to the speed rating - this vehicle's factory requirement is at least V-rated (240 km/h). When getting new tires, don't just look at the size; also verify the load index. For example, my fully-loaded vehicle requires a 102 rating. It's best to have a set of winter tires ready, as the factory tires don't provide enough grip on ice. I recommend directly photographing the string of numbers on the sidewall of your old tires when going to the shop to avoid buying the wrong model.

Was this review help?
1
3
Share
Expand All
Fitzgerald
11/24/25 7:33am

Five years of experience with the Land Rover Freelander 2 has taught me that the original tire size primarily depends on the wheel rim. The 17-inch rims are paired with 235/65 R17 tires, the 18-inch with 235/60 R18, and the 19-inch with 235/55 R19. The set of 18-inch tires on my car, model 235/60 R18 103H, has run for 60,000 kilometers. When replacing tires, don't be fooled into upsizing the rims, as it can lead to inaccurate speedometer readings. Here's a lesser-known fact: the 'Extra Load' marking on the tire sidewall indicates a reinforced tire structure, suitable for the vehicle's weight. Noise levels vary significantly among different brands in the same tire category, with Michelin being the quietest but slightly less durable. It's advisable to keep the tire valve cap covers; losing them can allow water ingress, leading to valve core corrosion.

Was this review help?
2
1
Share
Expand All
More Forum Discussions

Can Secondary Ignition Be Detected?

Secondary ignition can be detected. If the vehicle stalls after driving through water and someone manually uses the starter to ignite and operate the engine, this is considered a secondary start. Precautions for driving through water are as follows: When encountering standing water on the road, slow down and assess the water level. If the water reaches two-thirds of the tire height, driving through it poses a certain risk, and it is advised not to force passage. Maintain a low speed when driving through water, as higher speeds can raise the water level, increasing the actual depth of the water. Additionally, ensure you do not stop, shift gears, or reduce throttle, maintaining medium-to-high throttle at low speed to pass through. If the engine stalls while driving through water, do not attempt to restart it. In such cases, it is likely that water has entered the engine, and restarting will only cause more severe damage.
10
1
Share

Why is Secondary Ignition Not Covered by Insurance?

Secondary ignition is considered a human-caused factor, and vehicle damages resulting from human causes are not covered by the insurance policy. Below is relevant information about secondary ignition: Introduction: During water wading, if water blocks the air intake and causes the vehicle to stall, attempting to restart the engine is referred to as secondary ignition. Precautions: It is important to note that even if the water on the road has receded, you should avoid attempting to restart the engine, as there may still be water in the intake pipe, and electrical systems may malfunction after being submerged. The best course of action is to contact a towing company. Do not try to save on towing fees at the risk of causing greater damage. When arranging for a tow, clearly communicate to the staff that the vehicle stalled during water wading. For easier towing, the towing company may shift the gear to neutral. Without understanding the situation, they might attempt to start the engine, so it is crucial to explain the circumstances clearly.
20
3
Share

What is the sequence for rotating car tires front to back?

Here is the introduction to the sequence for rotating car tires front to back: 1. Move the left front tire to the left rear position. 2. Move the right front tire to the right rear position. 3. Move the left rear tire to the right front position. 4. Move the right rear tire to the left front position. 5. Regular tire rotation ensures more even wear across all four tires. Tires are one of the most important components of a car, and their functions are as follows: 1. Support the entire weight of the vehicle, bear the load of the car, and transmit forces and moments in other directions. 2. Transmit traction and braking torque, ensuring good adhesion between the wheels and the road surface to improve the car's power, braking, and off-road performance. 3. Work with the car's suspension to cushion impacts during driving and dampen resulting vibrations. 4. Protect car components from severe vibrations and early damage, adapt to the vehicle's high-speed performance, reduce driving noise, and ensure driving safety, handling stability, comfort, and fuel economy.
9
0
Share

What are the differences between Junling and Kangling?

There are three main differences between Kangling (i.e., Jianghuai Kangling) and Junling (i.e., Jianghuai Junling). The specific differences between Kangling and Junling are as follows: 1. Different characteristics: (1) Features of Jianghuai Kangling: Jianghuai Kangling integrates sedan-like design concepts and manufacturing processes into economical light trucks, ensuring that domestic economical light trucks not only have good economic performance but also offer comfort, safety, and environmental friendliness, thereby elevating the quality and grade of domestic economical light trucks. (2) Features of Jianghuai Junling: As a cost-effective economical light truck, Jianghuai Junling Good Luck adopts the Isuzu 100P high-roof cab and large-curved windshield, providing an attractive appearance and broad visibility for safer driving. 2. Different tonnage: (1) Tonnage of Jianghuai Kangling: Kangling is a 1-1.5-ton grade product of Jianghuai light trucks. (2) Tonnage of Jianghuai Junling: The tonnage of Jianghuai Good Luck ranges from 0.7 tons to 2 tons. 3. Different uses: (1) Use of Jianghuai Kangling: Suitable for mid-range light trucks in short-distance and economically developed regions, with different power segments tailored to meet various transportation needs in rural markets. (2) Use of Jianghuai Junling: To adapt to the development of the individual economy, Jianghuai Junling light trucks timely launched the Junling mid-size light truck, mainly targeting the medium and short-distance intercity logistics market.
20
5
Share

What are the causes of brake light failure?

The causes of brake light failure include the following: 1. Brake system failure: Damage to the brake fluid pipe causing severe oil shortage in the brake system; low oil level in the brake fluid reservoir leading to failure of the float-type sensor, resulting in the brake warning light not illuminating or lighting up to indicate a brake system fault; severe wear of brake pads, pre-buried wire breakage causing brake system failure; the brake warning system itself failing; simple circuit faults such as short circuits and the generation of steam in the brake fluid pipes causing brake system failure. The solution to such brake system failures causing the brake light not to illuminate is to seek professional repair at a maintenance shop. 2. Brake bulb failure: Mainly refers to the brake bulb exceeding its service life, with current halogen brake bulbs having a lifespan of 1 2 years. To solve this type of problem, LED lights can be used instead, with a lifespan of 5 10 years, low power consumption, fast response speed, no delay in lighting up, and being environmentally friendly without pollution. 3. Brake switch failure: Mainly refers to poor contact of the switch behind the brake pedal. The solution for this type of brake light not illuminating is relatively simple—just replace the brake switch.
11
0
Share

What is the minimum speed for second gear?

The speed in second gear should not be lower than 10 km/h. A manual transmission car uses a manual shift mechanical transmission (also called manual transmission, MT) to adjust the vehicle speed. This means you need to manually move the gear lever to change the gear engagement position inside the transmission, altering the gear ratio to achieve speed variation. The gear-speed matching requirements during the driving test (Subject 3) are as follows: first gear allows 0-20 km/h, shift to second gear at 15-20 km/h; second gear allows 10-30 km/h, shift to third gear at 25-30 km/h; third gear allows 20-40 km/h, shift to fourth gear at 35-40 km/h; fourth gear allows 30-50 km/h, shift to fifth gear at 45-50 km/h.
16
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.