···
Log in / Register

What is the tire model and specification for the BYD G3?

4 Answers
VonLila
08/26/25 3:01am

The tire model for the BYD G3 is 195/60R15. The first number, 195, indicates the tire width is 195MM. The 60 represents the aspect ratio of the tire's cross-section, which is 60%, meaning the height of the cross-section is 60% of the width. The 15 denotes the rim diameter in inches. The letters or symbols in the middle have special meanings: "X" stands for high-pressure tires; "R" and "Z" indicate radial tires; and "-" represents low-pressure tires. In addition to the model, the following common data are also marked on the tire: Tire cord material: Represented by Chinese pinyin, such as M for cotton cord, R for rayon cord, N for nylon cord, G for steel cord, and ZG for steel radial cord tires. Speed rating: Indicates the maximum speed at which the tire can carry a specified load under defined conditions. Letters from A to Z represent certified speed ratings ranging from 4.8km/h to 300km/h. Common speed ratings include: Q: 160km/h; H: 210km/h; V: 240km/h; W: 270km/h; Y: 300km/h. Rim specification: Indicates the rim size compatible with the tire for practical use, such as standard rim 5.00F.

Was this review help?
16
1
Share
ChloeLee
09/08/25 3:13am

The original tire specification for the BYD G3 is 185/60 R15, which I recall is the standard configuration. The 185 represents the tire width in millimeters, the 60 is the aspect ratio that contributes to a more comfortable driving experience; the R indicates a radial structure, and the 15 is the wheel diameter in inches. When driving this car, I've noticed that this size offers good fuel efficiency and stable grip on city roads, making it ideal for daily commuting. When selecting new tires, it's important to match the original size and avoid altering the specifications randomly, as this can affect fuel consumption and safety. It's recommended to check the tire pressure every 5,000 kilometers, adjusting it slightly lower in summer and higher in winter to extend tire life. For tire replacements, opting for reputable brands like Michelin or Goodyear ensures greater reliability and peace of mind.

Was this review help?
7
2
Share
Expand All
Theresa
10/22/25 3:17am

My BYD G3 uses 185/60 R15 tires. Decades of driving experience tell me that the 185mm width provides excellent grip, while the 60% aspect ratio cushions bumps effectively. The 15-inch rims ensure stability without wobbling. Tire condition is crucial for braking safety, so be sure to check tread wear and air pressure quarterly. When replacing tires, maintain the original size to prevent loss of vehicle control. For more economical options, reliable domestic brands can save you unnecessary expenses. Always inspect tires before long-distance trips - this is advice from a seasoned driver.

Was this review help?
10
2
Share
Expand All
LeGabrielle
12/05/25 3:41am

As a female car owner, my BYD G3 uses tires with the model number 185/60 R15, which is simple and easy to remember. The 185 width is perfect for smooth city driving, and the 60 aspect ratio provides comfortable shock absorption, making school runs bump-free. I always stick to the original tire size to avoid modification errors. Regular tire pressure monitoring via a mobile app keeps things hassle-free. For new tires, I recommend professional shops for installation—cost-effective and safe maintenance ensures peace of mind on the road.

Was this review help?
2
5
Share
Expand All
More Forum Discussions

What documents are required for vehicle license plate transfer?

For vehicle license plate transfer, you need to provide the outbound transfer authorization letter, vehicle license, "Motor Vehicle Transfer Application Form", registration certificate, buyer's identification and copies, as well as the vehicle license plate. Below is additional information: 1. Vehicle transfer means the vehicle records are transferred from the supervision of one city's vehicle management office to another. 2. The frame number is recorded during initial registration. If the frame number is incorrect after long-term use, it cannot be arbitrarily changed. The so-called vehicle ownership transfer record relocation is vehicle management terminology. The terms 'vehicle procedure transfer', 'record migration', and 'file transfer for ownership change' all refer to the same process.
6
1
Share

What is the proper position to adjust car side mirrors?

Adjusting car side mirrors follows these standards: 1. Left side mirror: Key adjustment points - Position the horizon line at the center of the mirror, then adjust so the car body occupies 1/4 of the mirror's image. 2. Right side mirror: Since the driver sits on the left side, it's harder to monitor the right side of the vehicle. Considering roadside parking needs, when adjusting the vertical position of the right mirror, leave more ground visible - about 2/3 of the mirror surface. For horizontal adjustment, maintain the same 1/4 car body proportion. Right mirror adjustment key points: Position the horizon at 2/3 height of the mirror, then adjust the car body edge to occupy 1/4 of the mirror image.
4
2
Share

How long does it take to obtain a C2 driver's license?

If all subjects are passed successfully on the first attempt, a C2 driver's license can be obtained in approximately two months. Below is detailed information about the C2 driver's license: 1. Vehicle type: The C2 driver's license is one of the more common licenses in daily life. It stipulates that holders of this license can only drive automatic transmission vehicles with no more than 9 seats and a length not exceeding 6 meters. 2. Age requirement: 18-70 years old. Any citizen aged 18-70 can apply for a C2 driver's license. 3. Permitted vehicle models: Small automatic transmission vehicles, which refer to automatic transmission cars with a total mass not exceeding 4.5 tons, seating no more than 9 people, and a length not exceeding 6 meters.
11
2
Share

What does a negative Honda Oil Life of -590 mean?

A negative Honda Oil Life indicates that the engine oil can no longer be used, otherwise it will damage the engine. A negative Oil Life proves that the lubricating ability of the oil has decreased, and its lubrication effect on the engine has significantly weakened. When the Oil Life reaches a certain level, the engine oil should be replaced promptly to ensure sufficient lubrication for the engine. Oil Life is a result calculated by the vehicle's computer based on a series of parameters such as the vehicle's usage time, mileage, engine speed, etc. To protect the engine, the value calculated by the computer is conservative. The timing for oil change should be determined by considering the vehicle's mileage, driving habits, and the Oil Life to avoid wasting resources by changing the oil too early or damaging the engine by changing it too late. Engine oil is the lubricant for the car engine, playing major roles such as lubrication, cleaning, cooling, sealing, reducing wear, shock absorption, and rust prevention in the car engine. It is known as the 'blood' of the vehicle.
20
0
Share

What is the oil specification for the Mercedes-Benz C200?

Fully synthetic oil - Shell Helix 5W-40 is the recommended oil specification for the Mercedes-Benz C200. The newer Mercedes-Benz models have higher requirements for oil quality, and you can use engine oils from the three major brands: Shell, Castrol, and Mobil. The viscosity of engine oil changes with temperature, so it's important to pay special attention to its performance under both low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, which means smoother cold starts for the car. The second number represents the oil's kinematic viscosity at 100°C. The higher this number, the better the oil maintains its viscosity under high temperatures, which can also be understood as better lubrication performance under high-temperature conditions. The method for changing the oil in a Mercedes-Benz C200 is as follows: Wait for the engine temperature to cool down, and also allow the oil to drain back into the oil pan; Use a wrench to loosen the drain plug and place an oil pan underneath to catch the old oil until it stops flowing. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out; Use a special wrench to remove the oil filter; Apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add new oil through the oil filler cap on the engine valve cover. Generally, fill about three-quarters of a standard oil container; Start the engine and let it run for 5 minutes, then check for any leaks around the drain plug and oil filter. If there are leaks, perform necessary repairs; After stopping the engine, pull out the dipstick and check that the oil level is within the standard range.
7
3
Share

Where to Buy Honda Monkey125 in China?

Honda Monkey125 can be purchased on the domestic website NiuMo. Here is some extended information about Honda: 1. Brand Introduction: Honda started in 1948 by producing bicycle auxiliary engines. By 2012, Honda had developed into a company with innovative technologies in various fields, from small general-purpose engines and scooters to sports cars, continuously researching and producing new products. 2. Development History: Honda was founded in September 1948. The full name of Honda Motor Company is "Honda Motor Co., Ltd.", and this research institute mainly produced textile machinery.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.