···
Log in / Register

What is the tire model and size for the 2016 Tiguan?

4 Answers
LaWillow
07/29/25 8:04pm

The tire model and size for the 2016 Tiguan are: 215/65r16, with a tire width of 215mm, tire thickness of 140mm, an aspect ratio of sixty-five percent, and a wheel diameter of 16 inches. The tire maintenance methods are: 1. Regularly clean the stones in the tire gaps; 2. Reduce exposure of the tires to sunlight; 3. Promptly check the tire pressure; 4. Pay attention to the maintenance of the suspension; 5. Regularly check the front wheel alignment; 6. Be mindful of driving habits. The steps for tire replacement are: 1. Park the vehicle in a safe and stable area; 2. Place the jack under the frame of the vehicle where the tire is to be changed and lift the vehicle to a certain height; 3. Loosen the nuts with a wrench and remove the tire that needs to be replaced; 4. Place the new tire on; 5. Tighten the nuts with a wrench; 6. Retract the jack.

Was this review help?
20
1
Share
OLaura
08/14/25 4:07pm

I've worked on many 2016 Tiguan models, and the tire size is typically 235/55 R17. This means a tire width of 235 millimeters, an aspect ratio of 55%, fitted with 17-inch rims. The factory chose this size to strike a balance between comfort and handling, making it particularly suitable for SUVs like the Tiguan in urban environments. If you're considering changing tires, I recommend sticking to the original size or checking the owner's manual, as altering the size can affect driving stability and fuel consumption. For snowy areas, you can use winter tires of the same specifications to enhance safety. It's crucial to confirm based on your vehicle's configuration: base models might use 215/65 R16, while higher trims sometimes come with 18-inch rims. During routine maintenance, checking tire wear and pressure is also important to extend their lifespan and save on fuel costs. I've seen some owners switch to the wrong size, only to experience worse handling and end up spending money to revert to the original setup.

Was this review help?
3
2
Share
Expand All
VanMichael
10/16/25 2:16am

Buddy, I know the Tiguan pretty well! The 2016 model usually comes with 235/55 R17 tires – 235mm width, 55% aspect ratio, and 17-inch rims. This size offers a comfy ride with solid grip, my go-to recommendation. Can't find the manual? Just check the label on the driver's door frame. Stick to this size – deviating increases fuel consumption and may compromise high-speed stability. When replacing tires, Michelin or Bridgestone are durable picks. I've driven a friend's high-trim version with slightly larger tires – better highway stability but slightly higher fuel consumption. Remember: regular pressure and tread checks mean safer driving and cost savings. Consistent sizing matters across road conditions – original-size tires deliver reliable traction, especially during rainy highway drives.

Was this review help?
8
4
Share
Expand All
JulianRose
11/29/25 3:04am

My 2016 Tiguan has 235/55 R17 tire size. The tire width is 235mm, aspect ratio 55%, and wheel diameter 17 inches. I chose this because it balances comfort and handling, providing a smooth and fuel-efficient ride. Always check the manual when replacing tires to avoid issues caused by incorrect sizing. In daily use, the correct size helps reduce tire wear and enhances safety.

Was this review help?
6
0
Share
Expand All
More Forum Discussions

How to Replace the Battery in a Toyota Electronic Key?

The method to replace the battery in a Toyota car key is as follows: Hold the remote key facing upwards, use a small flat-head screwdriver to gently pry into the middle of the gap. The key will separate slightly, creating a gap of about 2mm. Then, separate the key into two parts to access the battery compartment. Gently split the key along the middle gap, and finally remove the old battery and replace it with a new one. Below are the detailed steps: First, prepare the necessary tools for battery replacement: 1 flat-head screwdriver, the car key that needs a battery replacement, and a new battery. Step 1: There is a round button on the side of the car key. Press this button with one hand while pulling out the mechanical key with the other hand. Step 2: Hold the key with one hand and the flat-head screwdriver with the other. Locate the gap in the middle of the top part of the key and insert the flat-head screwdriver into it. Pry the key up and down until a gap is created. If the key doesn't budge, gradually increase the force until it moves. Step 3: Remove the key's circuit board and gently push one side of the battery with your finger to remove it. Place the new battery with the positive side facing up into the battery slot of the key. Gently push the battery until it is fully secured. Step 4: Cover the key's circuit board back onto the key, align the two separated halves of the key, and press both sides of the key with your hands until the upper and lower parts are completely fitted together. Then, insert the mechanical key back into the key gap to complete the process. Summary: If the key does not function properly after following the above steps, disassemble the key again to check if the battery was installed incorrectly (wrong side up). If the battery orientation is correct, then the issue may lie with the key itself.
6
4
Share

How to Replace the Battery of a Geely Emgrand Car Key?

Geely Emgrand car key replacement method is as follows: 1. Press the button next to the car key to take out the mechanical key; 2. Find the small slot next to 'open' and use a flat-head screwdriver to open it; 3. Turn counterclockwise to open the slot and gently pry it open with your hand; 4. Remove the battery that needs to be replaced and take out the button battery for replacement. More information about the Geely Emgrand is as follows: 1. The Emgrand has launched two versions, the Sport version and the Elegant version, with two displacements, 1.3T and 1.8L, totaling 11 models. 2. In the name Emgrand GS, the letter G stands for Grand, interpreting its larger body size and space. The letter S stands for Sporty, as the Emgrand GS design incorporates the crossover SUV style with the aesthetic concept of sporty mimicry design.
14
3
Share

What Causes White Smoke from a Car's Exhaust Pipe in Winter?

White smoke is actually just water vapor attached to the inner wall of the exhaust pipe muffler. Since the exhaust gas coming out of the pipe is at a high temperature, this hot water vapor rapidly cools when expelled from the exhaust pipe, quickly condensing into visible small water droplets. Here are the sources of water vapor in the exhaust pipe: 1. In most cases, it comes from the air. 2. Impure fuel containing a relatively high amount of water vapor. 3. A dirty air filter causing insufficient air intake. 4. Older carburetor-equipped family cars with carburetor malfunctions. 5. Modern fuel-injected cars without carburetors where the oxygen sensor in the exhaust pipe is contaminated, failing to provide the correct information to the engine control unit. 6. Damaged cylinder head gasket or cylinder liner allowing coolant to enter the cylinder. 7. Vehicles frequently driven short distances where moisture in the exhaust pipe cannot be fully expelled in time, leading to water accumulation.
17
3
Share

Where is the child safety lock on the Volkswagen Lavida?

Lavida's child safety lock is located on the side of the rear door and is an orange-red button. The following is a related introduction to the child safety lock: 1. The rotary child safety lock requires the use of a key (or key-shaped object) inserted into the corresponding hole to rotate the knob switch for locking and unlocking operations. Below is how to operate the rotary child safety lock: (1) Activation: Insert the mechanical key into the hole and rotate it in the direction indicated by the connector (usually clockwise) until it is tightened. (2) Deactivation: Rotate the keyhole in the opposite direction to unlock the child lock. 2. The toggle-type child safety lock is more convenient to use. Below is how to operate the toggle-type child lock: (1) Activation: Push the toggle lever (in the direction of the arrow) to complete the locking operation of the child safety lock. (2) Deactivation: Push the toggle lever all the way in the opposite direction of the arrow to deactivate the child safety lock.
2
3
Share

Can 84 Disinfectant Be Used for Vehicle Disinfection?

84 disinfectant can be used for interior disinfection in vehicles, but car owners must ensure it is diluted before wiping the car's interior. Additionally, it is advisable to wear rubber gloves when using 84 disinfectant to avoid corrosion from the solution. While cleaning the interior, it is recommended to keep the car doors open and ventilate the area for some time after wiping to eliminate the odor. Below are some relevant details about 84 disinfectant: 1. 84 disinfectant is a commonly used disinfectant in daily life, primarily composed of sodium hypochlorite, which has strong disinfecting properties and noticeable bleaching effects. If car owners intend to use 84 disinfectant for cleaning the car's interior, they must follow the dilution ratio specified on the product packaging and mix it with water beforehand. 2. If 84 disinfectant is not properly diluted, the resulting solution can be corrosive and may damage the car's interior. Using undiluted 84 disinfectant on the interior can leave white stains, and for vehicles with metal-based interior materials, it may cause discoloration or oxidation.
2
1
Share

What is the correct method to measure engine oil?

Here is the correct way to check engine oil: 1. Smell test. Pull out the dipstick and smell it closely. If there is a strong sour odor, it indicates the oil has deteriorated and should be changed. 2. Rubbing method. Rub the extracted old oil repeatedly between your thumb and forefinger. Good-quality oil will feel lubricated, produce little residue, and have no friction. If you feel impurities, poor viscosity, or even a gritty sensation, it should be changed. 3. Color test. Take a clean white filter paper (or a good-quality tissue), drip a few drops of old oil on it, and observe the color after the oil has seeped through. Good-quality oil will have no powder, feel dry and smooth to the touch, and show a clear yellow infiltration zone. If it appears dark brown or has impurities, it should be changed. 4. Light test. Hold the dipstick at a 45-degree angle under light and observe the oil droplets. If you can clearly see no residue in the droplets, the oil is still good. If there is a lot of residue, it should be changed.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.