···
Log in / Register

What is the tire inflation warning?

4 Answers
SawyerAnn
07/30/25 12:16am

Prompting tire inflation means the tire pressure warning is activated, indicating that one or more tires have insufficient air pressure. Underinflated tires can lead to abnormal wear, shorten tire lifespan, increase fuel consumption, and even raise the risk of a blowout. The standard tire pressure is approximately 2.2 to 2.5 bar. The maintenance methods for car tires are as follows: 1. Regularly check tire pressure: Tire pressure is a crucial factor affecting tire lifespan. It should not be too high or too low. Inflate according to the vehicle's recommended tire pressure. In summer, try to keep the pressure slightly lower, while in winter, ensure the tire pressure is slightly higher than in summer due to thermal expansion and contraction. 2. Frequently inspect tire wear: Some vehicles may experience uneven tire wear ("tire cupping"), so regularly check tires, especially the inner side, for abnormal wear. Pay attention to whether the tread depth on both sides is consistent. 3. Promptly remove small stones and other debris from tires: Debris in tire treads poses potential hazards and can fly out while driving. Use a key or similar tool to remove small stones and keep tires clean. 4. Rotate tires on schedule: Front tires, being steering tires, wear more quickly. To reduce front tire wear, perform a four-tire rotation every 5,000 kilometers after the first maintenance, preferably using the diagonal rotation method.

Was this review help?
3
1
Share
DeCali
08/16/25 4:31am

The tire inflation alert is that light or warning sound on the car that reminds us when the tire pressure is too low. When driving, I often see a small light shaped like a tire on the dashboard, which tells me that at least one tire has low pressure and needs to be inflated immediately. This is really important because driving with low tire pressure increases fuel consumption. I often feel the car is much heavier, and the fuel gauge drops much faster, which really hurts the wallet in the long run. Safety-wise, it's even more critical—low tire pressure can cause the tire to overheat and potentially lead to a blowout, especially scary at high speeds. So, I always try to find a gas station as soon as possible to check the pressure with a gauge and inflate each tire to the manufacturer's recommended level. Remember to check your tires regularly, at least once a month, to avoid many unexpected troubles.

Was this review help?
10
5
Share
Expand All
VonAshley
10/19/25 7:00am

When the tire pressure is low, the system gives a prompt, which feels like a thoughtful little assistant. In the past, without this feature, I often had to check manually. Now, when the light on the car comes on, I know it's time to inflate the tires. Why is it important? Low tire pressure makes driving unstable, the steering feels floaty, and it's easy to skid when turning, especially on rainy days—how dangerous! It also affects the tire's lifespan. I've experienced a few times when I didn't deal with it promptly, and the tires wore out quickly and unevenly, costing more money for replacements. It's advisable to develop a habit of checking for tread wear or nail punctures when inflating the tires to avoid unnecessary trouble. This little reminder is really convenient and ensures safety.

Was this review help?
7
1
Share
Expand All
JuneRose
12/02/25 7:38am

When the tire pressure is low, a tire icon lights up on the car's dashboard as a warning, which is something I pay the most attention to. After driving for a long time, I've noticed that when the tire pressure is normal, the ride is stable and comfortable, but when it's low, the car becomes bumpy, consumes more fuel, and wears out the tires. I learned my lesson once when I ignored it, resulting in tire deformation and having to spend hundreds on a new one. The warning system is a great help in ensuring safety, and I always remind people around me to regularly inflate their tires to extend their lifespan.

Was this review help?
3
1
Share
Expand All
More Forum Discussions

What are the models and specifications of hydraulic cylinders?

Common standards include Φ140/100-800, which means the cylinder bore is 140, the rod diameter is 100, and the stroke is 800. For three-stage and four-stage hydraulic cylinders, the rated working pressure is 19MPa, the stroke ranges from 3880 to 6200mm, the maximum extending sleeve diameter is 195mm, and the cylinder thrust is 20-56 tons. The structural composition of hydraulic cylinders is introduced as follows: Introduction 1: The hydraulic cylinder of a hydraulic press consists of a cylinder head (guide sleeve), cylinder body, piston rod, piston head, sealing device, buffer device, and exhaust system. The hydraulic cylinder is a hydraulic actuator that converts hydraulic energy into mechanical energy for linear motion. The hydraulic cylinder has a simple structure, smooth movement, and reliable operation. Introduction 2: The cylinder body of the hydraulic cylinder is made of high-quality carbon structural steel forgings to ensure material uniformity. The inner hole of the cylinder is subjected to strong rolling to improve surface smoothness, precision, hardness, and high rigidity, with good wear resistance. The hydraulic cylinder has a long service life. The piston rod and piston head of the hydraulic cylinder are made of carbon structural steel forgings, with chrome plating and fine grinding on the surface, providing high hardness and strong pressure resistance. Introduction 3: The sealing device of the hydraulic cylinder uses imported high-quality sealing rings, which have excellent wear resistance and heat resistance, low friction, avoiding cylinder leakage, ensuring reliable operation and extending the service life of the sealing rings. Introduction 4: The buffer device of the hydraulic cylinder can slow down the piston at the end of the stroke and bring the speed close to zero, reducing the inertial force of the piston moving parts and preventing collisions between the piston parts and the cylinder body, thereby reducing noise and vibration, avoiding damage to the hydraulic cylinder body, and extending the service life of the hydraulic cylinder. The exhaust system of the hydraulic cylinder ensures the smooth operation of the hydraulic cylinder and prevents intermittent impact forces and vibrations.
16
0
Share

Can a Motor Vehicle Driving License Be Used to Ride a Motorcycle?

Having a motor vehicle driving license does not permit one to ride a motorcycle. The traffic management department of the public security authority should establish a supervision system for the vehicle management office's handling of motor vehicle driving license services. Additionally, they should strengthen the supervision and management of driver examinations, the issuance of driving licenses, and their use. The following driving licenses allow one to ride a motorcycle: Introduction 1: The driving licenses that permit motorcycle riding are types D, E, and F. Among them, a D license allows the holder to drive all types of motorcycles, including both three-wheeled and two-wheeled ones, regardless of the engine displacement or model. Introduction 2: The D license covers the vehicle types permitted by the E and F licenses. An E license allows the holder to drive all two-wheeled motorcycles, regardless of engine displacement, and also includes the vehicle types permitted by the F license. An F license only permits the holder to ride light motorcycles with an engine displacement below 50CC (excluding 50CC). No car or other type of driving license allows one to ride a motorcycle.
19
4
Share

What Causes the Corolla's Locking Horn Not to Sound?

Corolla's locking horn not sounding is usually caused by the vehicle not being locked or the anti-theft system's battery running out. Here are the relevant details: Reasons why the locking horn does not sound: The vehicle is not locked, and the anti-theft system will only work after locking; the movement is slight, and lightly touching the vehicle will not activate the anti-theft system; the anti-theft system's battery is depleted, and replacing the power source will solve the issue; the anti-theft system is damaged, such as a short circuit in the circuit, and requires repair at a service center. Activating the locking horn: Locking and unlocking are divided into hazard light indicator and horn modes. By simultaneously pressing the lock (LOCK) and unlock (UNLOCK) buttons on the smart key for more than 2.5 seconds, the hazard light will flash once, and the horn will sound once, indicating that the horn mode has been activated.
4
0
Share

What are the precautions for overtaking a car?

Here are the precautions for overtaking a car: 1. Observe the road conditions: Before overtaking, observe the road conditions ahead and try to choose a flat and straight road. Before overtaking, observe the situation of the lane you intend to use. Check the left rearview mirror to see if there is a car behind you attempting to overtake. Wait for the car behind to complete its overtaking maneuver before proceeding with your own. 2. Use of lights: When the conditions for overtaking are met, turn on the left turn signal, then alternately flash the high and low beams and honk the horn to alert the car in front. Confirm that the car ahead has signaled to yield before turning left. 3. Driving in the borrowed lane: If you are already in the borrowed lane, downshift and press the accelerator deeply to increase the engine speed and boost power. The reason for downshifting is that when accelerating, downshifting and pressing the accelerator provides a quicker response, allowing for faster acceleration.
13
4
Share

Why don't 4S shops allow the installation of cruise control?

When purchasing a vehicle, some owners request 4S shops to install cruise control functionality, but some 4S shops advise against it. This is because installing a cruise control system differs from installing other vehicle accessories. The cruise control system needs to be connected to the engine control circuit, car airbags, and the central console. Such modifications can alter the original vehicle's circuitry and wiring, and improper installation may even damage the car. Cruise control systems, also known as speed control systems or autonomous driving systems, function by automatically maintaining the speed set by the driver without the need to press the accelerator pedal, allowing the vehicle to travel at a constant speed. Drawbacks of cruise control systems: They may malfunction, which can be extremely dangerous during high-speed driving. Cruise control is only suitable for use on highways or long-distance routes with light traffic and cannot be used on roads with complex conditions. When using cruise control, the driver's foot is freed from the accelerator pedal, leading to relaxation and reduced concentration. In emergency situations, this may delay braking response, resulting in untimely braking.
20
4
Share

What gear should an automatic transmission tow truck use?

An automatic transmission tow truck should be in N (Neutral) gear. Below are some relevant introductions about tow trucks: 1. The meaning of a tow truck: The full name of a tow truck is a road clearance vehicle, also known as a tow truck, road rescue vehicle, or towing vehicle. It has multiple functions such as lifting, pulling, and towing. Tow trucks are mainly used for road breakdown vehicles, urban traffic violation vehicles, and emergency rescue operations. 2. Precautions for towing: The color of the tow truck should be bright, preferably a warning color that can alert others. Reflective strips can be applied during night towing to remind passing vehicles. During towing, it is necessary to maintain good communication with the vehicle being towed, requiring close coordination between the two vehicles to control a safe distance. The tow rope should not be too short, as the vehicle being towed already has issues. If the tow rope is too short, sudden braking can easily lead to a rear-end collision between the two vehicles.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.