What is the tire brand of the A4L?

1 Answers
PenelopeAnn
07/30/25 9:40am
Audi A4L is equipped with Michelin tires, with the specification being 235/55R17. The tire consists of an outer tire, inner tube, and a base strip. Below is the relevant introduction: Introduction to Michelin tires: Michelin has promoted the radialization process of large vehicle tires in China. Compared to bias-ply tires, radial tires have advantages such as longer wear life, lower puncture rates, fuel savings, larger contact area, better handling, lower operating temperatures, and enhanced safety, comfort, and machine protection. Introduction to the parameters of the 2020 A4L: The 2020 A4L is a mid-size sedan with body dimensions of 4858mm in length, 1847mm in width, and 1439mm in height, a wheelbase of 2908mm, a fuel tank capacity of 56 liters, and a curb weight of 1615kg. It features a five-link independent front suspension and a five-link independent rear suspension. It is powered by a 2.0L turbocharged engine with a maximum horsepower of 190PS, a maximum power of 140kW, and a maximum torque of 320Nm, paired with a 7-speed dual-clutch transmission.
Was this review help?
1
1
Share
More Forum Discussions

What is the method to restore the black screen on the Langdong?

The method to restore the black screen on the Langdong is: 1. Press and hold the home button and the power button until the logo appears and the restart is successful; 2. Use the system installation disc, wait for the startup interface to display, then select 'Repair System' and wait for the repair to complete. The Langdong's body dimensions are: length 4570mm, width 1775mm, height 1445mm, with a wheelbase of 2700mm, a fuel tank capacity of 50 liters, and a trunk capacity of 473 liters. The Langdong is equipped with a 1.6L naturally aspirated engine, with a maximum horsepower of 128ps, a maximum power of 93.8kw, and a maximum torque of 156nm.
9
5
Share

What are the operating steps for a Volkswagen car jack?

Volkswagen car jack operating steps are: 1. Locate the support points at the front and rear of the vehicle's side beams; 2. Secure the jack's lifting claw onto the vertical edge of the support point; 3. Turn the handle to raise the vehicle off the ground with the jack's lifting claw. The principle of a car jack involves moving the handle to engage the pawl, which drives the intermittent rotation of the ratchet wheel. The small bevel gear then drives the large bevel gear, rotating the lifting screw to enable the lifting sleeve to achieve upward or downward movement. Taking the Volkswagen 2021 Lavida as an example, its body dimensions are: length 4670mm, width 1806mm, height 1471mm, with a wheelbase of 2688mm, a fuel tank capacity of 51 liters, and a trunk capacity of 510 liters.
6
4
Share

What does vehicle glazing mean?

Automotive glazing involves using a soft wool pad or sponge with a high-speed vibration polishing machine to forcefully penetrate glaze molecules into the surface of the car and the gaps in the paint, leveraging the glaze's unique permeability and adhesion. After glazing, the vehicle's paint surface can achieve or even surpass the original paint effect, while also offering features such as high-temperature resistance, sealing, oxidation resistance, enhanced gloss, water wash resistance, and corrosion resistance. Precautions after automotive glazing: 1. Avoid washing the car with water within 8 hours after glazing, as the glaze layer has not fully solidified and will continue to penetrate during this time; washing may remove the uncured glaze. 2. Try to avoid washing the car after the glazing treatment, as the product provides anti-static properties, so general dust can be wiped off with a clean, soft cloth. 3. Do not apply wax after the glazing treatment, as the wax layer may adhere to the surface of the glaze layer, and the isolation caused by the wax layer could affect the glazing effect when reapplying glaze.
5
4
Share

What causes the Audi A4L to shake when cold?

A4L cold shaking mainly has several major causes: carbon deposits, weak ignition, low cylinder pressure, unqualified fuel, etc. There are three main reasons for cold shaking: 1. Low ignition energy at low engine temperature: The temperature inside the engine is insufficient, and the temperature of both fuel and lubricating oil is not high enough; 2. Inappropriate engine mixture ratio: The air-fuel mixture ratio is not accurately adjusted, which exists in both open-loop and closed-loop control. In vehicles with closed-loop control, the minimum operating temperature of the oxygen sensor is 370 degrees Celsius. When starting the car, the temperature in the exhaust pipe does not reach 370 degrees Celsius, so the oxygen sensor does not work, leading to ECU misjudgment; 3. Carbon deposits on engine valves and intake ports: If carbon deposits occur on the engine valves and intake ports, they can absorb an appropriate amount of fuel, causing the ECU to make errors, resulting in shaking.
20
4
Share

What Causes the Horn to Keep Sounding?

If the car horn keeps sounding continuously, it could be due to the following reasons: the horn button on the steering wheel is stuck and remains in a permanently powered position; the relay contacts are fused and fail to disconnect normally, causing continuous contact; or the negative switch wire of the horn is grounded. Additional information: 1. While driving: Avoid pressing the horn for extended periods. Also, do not press the horn too hard or use excessive force, as this is a common cause of failure. 2. During rainy days or car washing: Try to prevent the horn from getting soaked with water. If water ingress is noticed, dry it immediately. 3. Introduction to relay contacts: Relay contacts are in either a normally open or normally closed state, simply understood as switches that connect or disconnect signals. The performance of the contacts is affected by factors such as contact material, contact pressure, load type, operating frequency, atmospheric conditions, contact configuration, and bouncing.
17
0
Share

What brand is geoland tire?

geoland is an off-road tire series under Yokohama Tires, available in sizes ranging from 15 to 18 inches. Yokohama Tires is a Japanese tire brand established in 1917 in Yokohama, Japan, with the full company name being The Yokohama Rubber Co., Ltd. Important considerations regarding car tires: 1. The sidewall of the tire displays information such as the brand, production date, model, and manufacturer. Be sure to check these details when picking up a new car. 2. When replacing car tires, park the vehicle on a flat and solid surface to prevent tipping and potential hazards. 3. It's best to replace car tires with original equipment manufacturer (OEM) tires; although more expensive, they offer guaranteed quality. 4. When modifying car tires, it's advisable to use tires of the same size. 5. Car tires should be inspected every 10,000 kilometers to prevent safety risks due to air leakage, bulging, or abnormal tire pressure.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.