What is the tire brand of the 2019 new Camry?

2 Answers
StephanieDella
07/29/25 11:08pm
2019 new Camry tire brand is Yokohama. Tires are often used in complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during driving. Therefore, they must have high load-bearing performance, traction performance, and cushioning performance. At the same time, they are required to have high wear resistance and flex resistance, as well as low rolling resistance and heat generation. The 2019 new Camry has a length, width, and height of 4885mm, 1840mm, and 1455mm respectively, with a wheelbase of 2825mm. The body type is a 4-door, 5-seater sedan, and the top speed is 205 kilometers per hour.
Was this review help?
10
0
Share
MacValeria
08/16/25 1:13am
I've checked the tire configurations for the 2019 Camry, and they aren't uniform—they vary by specific model and region, featuring brands like Bridgestone, Michelin, or Goodyear. Having driven a friend's Camry a few times, I noticed Bridgestone tires perform well in wear resistance, making them ideal for daily commutes, while Michelin offers better grip, enhancing stability at high speeds. This choice significantly impacts driving experience: Bridgestone suits hassle-free city driving, whereas Michelin excels in comfort for long trips. Owners should verify their tire brand via the vehicle's label or manual to avoid safety risks during replacements. Regular checks on tire pressure and tread wear are also crucial to prevent roadside breakdowns.
Was this review help?
9
1
Share
Expand All
More Forum Discussions

How to Remove a Steering Wheel?

Method for removing a steering wheel: 1. Drill a hole in the middle of the flat iron jig and thread it, then install a screw rod; 2. Loosen the steering wheel's fixing nut until it aligns with the steering shaft, attach the flat iron jig on both sides using bolts into the two screw holes on the steering wheel, ensuring the jig is tightly against the steering shaft and nut, then tighten the middle screw rod of the jig against the steering shaft; 3. Use a hand hammer to strike the top of the screw rod while tightening the bolts on both sides. The vibration will loosen the steering wheel from the steering shaft. The function of the steering wheel is to convert the force applied by the driver on the edge of the steering wheel into torque, which is then transmitted to the steering shaft, thereby achieving the purpose of controlling the direction.
7
5
Share

How to Check Automatic Transmission Fluid?

Methods for checking automatic transmission fluid: 1. For transmissions equipped with a dipstick, check the fluid level using the dipstick markings - generally, the level should not exceed the maximum mark nor fall below the minimum mark; 2. For transmissions without a dipstick, there is typically an inspection screw on the side of the transmission housing. Remove this screw - if transmission fluid flows out, the level is normal. Different transmission types require different inspection methods, such as dipstick measurement, overflow tube inspection, or inspection port checking. Therefore, it's necessary to know the transmission model or vehicle VIN to consult relevant technical data. Transmission (commonly called gearbox in automotive applications or speed variator in industrial machinery) is a mechanical or hydraulic device for mechanical power conversion.
20
1
Share

What are the tips for replacing the cabin air filter?

Cabin air filter replacement tips: Locate the glove compartment in the front passenger seat area. Remove the dampers on both sides of the glove compartment to take it out. After removing the glove compartment, you will see the cabin air filter. Release the clip on the right side of the filter cover plate, then remove the old filter. When installing the new filter, pay attention that the arrow on the filter should face upward to ensure proper filtration. Then reinstall the cover plate and secure the right-side clip. The cabin air filter is installed in the vehicle's air conditioning system to absorb dust particles, alleviate respiratory discomfort, reduce irritation for allergy sufferers, and protect the air conditioning cooling system.
3
3
Share

Is Cleaning the Three-Way Catalytic Converter Useful?

Cleaning the three-way catalytic converter is useful and necessary. Since fuel contains harmful substances such as sulfur and phosphorus, combustion can form chemical complexes on the surface of the oxygen sensor and inside the three-way catalytic converter. Over time, carbon deposits will accumulate. If not cleaned in time, it can lead to failures such as poisoning and malfunction of the oxygen sensor and three-way catalytic converter, ultimately causing abnormal engine operation, increased fuel consumption, reduced power, and excessive exhaust emissions. The function of a three-way catalytic cleaner is to remove chemical substances like sulfur and phosphorus from the surface of the catalytic converter, unclog exhaust pipe blockages, and restore the activity of the three-way catalytic converter. However, if the blockage is severe, relying solely on cleaner may not be very effective. In such cases, disassembly and cleaning may be necessary, and if the converter is damaged or severely blocked, it should be replaced directly.
9
4
Share

How to Check the Fuel Level in a Car?

Methods to check the fuel level in a car: For analog fuel gauges, there are two letters marked on the gauge, E and F. E stands for empty, indicating no fuel, while F stands for full, indicating a full tank. When the needle points to E, it's time to refuel. Digital fuel gauges display the remaining fuel through the remaining mileage and the number of illuminated segments on the display. Both analog and digital fuel gauges require the vehicle to be started before readings can be taken. On analog fuel gauges, the letters E and F are marked, where E is the initial of Empty, meaning the tank is empty, and F is the initial of Full, meaning the tank is full. Digital fuel gauges indicate the remaining fuel through the remaining mileage and the number of illuminated segments on the display.
7
2
Share

How to Determine the Quality of Car Shock Absorbers?

Methods to determine the quality of car shock absorbers: First, check if the shock absorber is leaking oil. If there is any leakage, repair it immediately. If there is no oil leakage, a simple way to judge is to drive the car on an uneven road for 10 to 15 kilometers, then touch the shell of the shock absorber by hand to see if it is hot. If it does not heat up, it means the shock absorber may have lost its damping effect due to lack of oil or damage to key components, and it should be removed for inspection, repair, or replacement of parts. The shock absorber is mainly used to suppress the oscillation when the spring rebounds after absorbing shock and the impact from the road surface. When driving on uneven roads, although the shock-absorbing spring can filter the vibration of the road, the spring itself will still have reciprocating motion, and the shock absorber is used to suppress this spring jumping.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.