···
Log in / Register

What is the tire brand and model of Dongfeng Honda XR-V?

4 Answers
StEmilia
07/29/25 7:39pm

It uses Bridgestone Turanza ER370 tires with a size of 215/55R17. Below is the relevant information: Tire pressure: The standard tire pressure for Honda XR-V is 2.3-2.5 Bar. Measure the tire pressure when the tires are cold. This means the vehicle has been parked for at least three hours or has traveled less than 1.6 km. If necessary, inflate or deflate until the specified pressure is reached. The tire pressure checked when the tires are hot will be 30-40 kPa (0.3-0.4 kgf/cm2, 4-6 psi) higher than when checked cold. Tire brand: Turanza is a comfort series tire under Bridgestone. It not only ensures the balanced comfort and handling required by high-end sedans but also improves the tire's durability while incorporating environmentally friendly technology.

Was this review help?
4
4
Share
StLouis
08/14/25 2:52pm

I've been driving the Dongfeng Honda XR-V for many years, and the original tires are usually Yokohama's Geolandar G91, with a common size of 215/60 R16. This model performs quite steadily in city driving, with low noise and good grip. However, the off-road experience is slightly worse. I recommend checking the wear regularly and maintaining a tire pressure of 2.5 bar to extend its lifespan. When replacing tires, choose Michelin Primacy 4, which is quiet and energy-efficient, costing about 700 yuan per tire. Tire aging can affect braking distance, especially on rainy mountain roads, so be careful and ensure safety first.

Was this review help?
13
2
Share
Expand All
SophieRose
10/15/25 6:32am

As an XR-V owner, I noticed the manual specifies the tire brand as Dunlop SP Sport 5000, size 215/55 R17. They provide a smooth and comfortable ride in daily driving, but tend to wear quickly on suburban gravel roads. A friend switched to Bridgestone Turanza tires, which improved wear resistance by 20%. Remember to check tire pressure monthly to prevent unexpected blowouts and save fuel consumption—especially crucial before long trips. Timely maintenance helps avoid potential hazards.

Was this review help?
17
0
Share
Expand All
StAniyah
11/28/25 7:22am

When maintaining the XR-V, the commonly used tire brand is Bridgestone ALENZA, size 215/60 R16. Tire condition directly affects safety, so I recommend checking the tread depth every 5,000 kilometers to ensure it's not below 3mm. If wear is uneven, a wheel alignment is necessary. In winter, using Michelin X-ICE snow tires can enhance traction. When replacing tires, choose the matching size to ensure the speedometer's accuracy. Simple maintenance can save you trouble.

Was this review help?
1
3
Share
Expand All
More Forum Discussions

For a 2007 car, in which year does it require two inspections per year?

2007 cars require two inspections per year starting from 2022. Cars from 2007 undergo one annual inspection per year. Vehicles aged 6-15 years all require one inspection per year. Mandatory scrapping only occurs when the mileage reaches 600,000 kilometers. Vehicles over 15 years old require two inspections per year. Below is an introduction to vehicle inspection regulations: Passenger transport vehicles: Within 5 years, one inspection per year; beyond 5 years, one inspection every 6 months; Trucks and large/medium non-passenger transport vehicles: Within 10 years, one inspection per year; beyond 10 years, one inspection every 6 months; Small and micro non-passenger transport vehicles: Within 6 years, one inspection every 2 years; beyond 6 years, one inspection per year; beyond 15 years, one inspection every 6 months; Motorcycles: Within 4 years, one inspection every 2 years; beyond 4 years, one inspection per year; Tractors and other motor vehicles: One inspection per year. Operational vehicles that pass safety inspections within the specified period do not require repeated safety inspections; Vehicles beyond the scrapping age: Cannot be transferred (sold or bought), but can continue to be used. For transactions, the vehicle owner can first apply for a scrapping certificate (to deregister the vehicle's records) at the vehicle management office before proceeding with the transaction.
17
4
Share

How Many Types of Turbocharger Abnormal Noises Are There?

Turbocharger abnormal noises are mainly divided into two types. The first type is noise caused by wear in the support channel; the second type is noise caused by damage to the turbine blades, resulting in unstable operation of the turbocharger during operation. Either type will accelerate the damage to the turbocharger and requires timely repair at an auto repair shop. Reasons for turbocharger abnormal noises: Turbocharger damage, causing abnormal noises from metal friction. Air leakage in the intake or exhaust pipes, or cracks in the intercooler, leading to pressurized gas leakage. Rupture of the bypass valve diaphragm, causing gas leakage. Burrs or protrusions on the inner wall of the housing, generating noise when high-speed airflow passes through. Accumulation of dirt in the diffuser section of the turbocharger. Dirt accumulation on the impeller surface, obstructing airflow. Working principle of a turbocharger: A turbocharger mainly consists of a turbine and a compressor, connected by a drive shaft. The turbocharger is essentially an air compressor that increases air intake by compressing air. It uses the inertial force of exhaust gases from the engine to drive the turbine in the turbine chamber, which in turn drives the coaxial impeller. The impeller compresses the air delivered from the air filter pipe, pressurizing it before it enters the cylinder.
7
1
Share

Can You Paint a Car on Rainy Days?

Painting a car on rainy days is not advisable. Rainwater generally contains acidity, and acid rain can significantly damage the car's paint, leading to surface oxidation and loss of gloss. Additionally, the high humidity in the air after rain can affect the drying speed of the newly applied paint. Car Painting Process: Cleaning: First, thoroughly clean the car's surface to remove dust and debris, and determine the repair process. Oiling: Apply oil to the area to be painted. Sanding: Choose the appropriate sandpaper to sand the area to be painted, ensuring the paint is completely smoothed. Applying Putty: After sanding off all the paint, apply putty to the area. Cleaning and Masking: After applying the putty, use an air gun to blow away dust and impurities to prevent paint splatter. Painting: Spray the pre-mixed paint in 3-5 layers. Finishing: After the paint dries, sand and adjust any uneven areas to achieve a smooth and clean finish. Precautions After Car Painting: If the car has just been painted, avoid exposing the newly painted areas to water and dust. It's best not to drive the car in the rain, as the fresh paint is still delicate and can be marked by rainwater, sometimes leaving permanent marks that cannot be polished away. Parking in a garage at night is recommended.
18
5
Share

What is the specification of Volkswagen 50200 engine oil?

Volkswagen 50200 corresponds to the SN grade of engine oil. Introduction to engine oil: Engine oil is known as the blood of the engine. It plays roles in lubrication, cleaning, sealing, heat dissipation, buffering, and rust prevention within the engine. Without engine oil, the engine cannot function properly. Engine oil consists of base oil and additives, where additives enhance the oil's performance. Common additives include antioxidants and dispersants. Classification of engine oil: There are three types of engine oil: full synthetic oil, semi-synthetic oil, and mineral oil. The base oil of full synthetic oil is artificially synthesized, with nearly uniform molecular size and shape. Therefore, full synthetic oil offers superior lubrication performance and a longer service life. The base oil of mineral oil is refined from petroleum, with irregular molecular sizes and shapes.
7
3
Share

What is the reason for the shutdown of BMW N13 injection device 1?

BMW usually shuts down this type of injection device due to spark plug issues, which can be diagnosed using the swap method. The spark plugs in the N55 engine should be replaced every 60,000 kilometers. Introduction to the injection device: The water mist direct injection cooling system can significantly improve efficiency when the engine is under full load. It avoids rich fuel injection and reduces exhaust temperature. It can reduce daily driving fuel consumption by up to 8%. Lower exhaust temperatures also reduce the production of harmful substances. Fuel compatibility: Optimal power output can be achieved even with low-octane 95-grade fuel; therefore, turbocharged engines equipped with the water mist direct injection system are suitable for use worldwide.
19
4
Share

Where to Place the Jack When Changing Tires on the Equinox?

When changing tires on the Equinox, place the jack under the chassis near the wheel on the raised area. Operate the jack steadily and rhythmically when lifting, and lower it slowly. If using multiple jacks simultaneously, ensure synchronized operation. After using the jack, conduct a thorough inspection, check the hydraulic pressure and potential hazards, perform maintenance, and store it in an appropriate location. Function of the Jack: Jacks are primarily used in factories, mines, and transportation sectors for vehicle repairs and other lifting or supporting tasks. They are lightweight, sturdy, flexible, and reliable, allowing easy carrying and operation by a single person. Precautions for Using a Jack: The working medium for the jack is YB-N32 hydraulic oil. When the ambient temperature is below 10°C, switch to YB-N22 hydraulic oil. For temperatures above 40°C, use YB-N46 hydraulic oil.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.