What is the time limit for Volkswagen's first maintenance?

1 Answers
Lonnie
07/29/25 11:00pm
Volkswagen's first maintenance is due at around half a year or 4,000 to 5,000 kilometers. Relevant information about the first car maintenance is as follows: Precautions for the first car maintenance: The period before the first maintenance of a new car is called the break-in period. During the break-in period, since the gears of the engine, transmission, etc. have not yet fully broken in smoothly, it is generally not advisable to drive too fast, absolutely not exceeding 100 km/h, and preferably not exceeding 80 km/h. If the vehicle is properly broken in during this period, there will be fewer problems with the car's operation in the future, and it will also be more fuel-efficient. Introduction to the first maintenance inspection content: The first maintenance inspection includes checking whether engine oil and oil filters need to be replaced, and cleaning the air filter; checking whether the car's coolant level is normal; inspecting the car's brakes and whether there are any scratches on the chassis components; checking whether the power steering fluid level is normal and whether there are any oil leaks at the oil pipe interfaces; examining the condition of the generator, air conditioning, water pump, and the aging and tightness of the belts; and checking the tire pressure and wear condition.
Was this review help?
3
5
Share
More Forum Discussions

How to Reset the Tire Pressure Warning Light on a BMW 3 Series?

The method to reset the tire pressure warning light on a BMW 3 Series is as follows: After restoring the air pressure of all four tires to the standard level, press and hold the tire pressure reset button next to the gear lever to eliminate the warning light. The BMW 3 Series is a new generation sedan product from BMW Group, with a body weight of 1465kg and dimensions of 4734mm in length, 1811mm in width, and 1455mm in height. The BMW 3 Series is equipped with a 4-cylinder engine, delivering a maximum power of 110kw and a maximum torque of 200nm. In terms of performance, the vehicle features an EDC shock absorption control system, offering three tuning modes: Sport, Normal, and Comfort. The interior includes a programmable full LCD instrument panel, a touch-sensitive central control display, and a full-color head-up display system.
10
1
Share

What Causes Frequent Car Stalling?

Reasons for frequent car stalling: 1. Use of low-quality fuel causing engine carbon buildup leading to stalling; 2. Damaged fuel pump or obstructed fuel lines; 3. Clogged fuel injectors or abnormal fuel pressure causing stalling; 4. Driver's lack of proficiency or improper operation may also result in stalling; 5. Faulty spark plugs or ignition coils. Solutions for stalling: 1. At idle speed, the car doesn't move quickly—simply restart the engine after stalling. For automatic transmission cars, shift to Park or Neutral before restarting; 2. If stalling occurs while coasting, maintain steering control while gently applying brakes. Manual transmission vehicles should depress the clutch, engage the appropriate gear, then release the clutch to let the vehicle's momentum restart the engine. Automatic transmission cars need to shift to Neutral before restarting the engine.
16
3
Share

Where to Insert the Memory Card in a Dash Cam?

Where to insert the memory card in a dash cam depends on the type of dash cam. For mirror-type dash cams, the card slot is located at the top of the front side of the device. For hidden-type dash cams, the card slot is on the left or right side of the device. For bullet-type dash cams, the card slot is on the right side of the device. Some dash cams have a more discreet design, so the memory card slot may be covered, but it is generally not too difficult to find. A dash cam is an instrument that records images, sounds, and other relevant information during vehicle travel. After installing a dash cam, it can record the entire driving process in video and audio, providing evidence in case of traffic accidents. A dash cam typically consists of a main unit, a speed sensor, data analysis software, and an infrared camera.
18
2
Share

What are the reasons for engine shaking during cold start?

Reasons for engine shaking during cold start: 1. Low ignition energy at low engine temperature, insufficient temperature inside the engine, and inadequate temperature of both fuel and lubricating oil. More fuel injection is required during cold start to meet power requirements; 2. Inaccurate air-fuel mixture ratio adjustment, which occurs in both open-loop and closed-loop control systems; 3. Carbon deposits on engine valves and intake ports; 4. Variations in spark plug ignition gap and timing control; 5. Malfunctioning coolant temperature sensor; 6. Dirty air flow meter resulting in reduced air intake; 7. Poor working condition of the exhaust gas recirculation valve, introducing exhaust gas during idle; 8. Poor fuel quality failing to meet the required calorific value, leading to reduced combustion power output.
20
3
Share

What emission standard does VI refer to?

VI refers to the China VI emission standard. The China VI fuel standard can reduce particulate emissions by up to 10%, significantly lowering the pollutant content in vehicle exhaust. Under the China VI standard, the upper limit of aromatic hydrocarbon content in ethanol gasoline for vehicles is reduced by 12.5%, olefin content by 25%, and benzene content by 20%. After upgrading from China V to China VI, the environmental and performance characteristics of gasoline and diesel for vehicles are further improved, effectively reducing engine carbon deposits and extending engine lifespan. Currently, vehicles that meet the China VI emission standard include the X-Trail, all-new Sylphy, Tiguan L, Cadillac XT4, Highlander, Camry, new Lavida, Roewe RX5, and Acura CDX hybrid version, among others.
5
4
Share

What to Do When Fog Lights Get Water Inside?

The solutions for fog lights getting water inside are: 1. If the fog light has slight water ingress, you can turn on the lights for a while, using the heat generated when they are turned on to allow the internal moisture to escape through the vent pipe; 2. In case of severe water ingress, it is necessary to promptly remove the lamp cover, drain the water, and let it dry. It is important to check whether there are any cracks or leaks in the headlight, and if so, they need to be addressed as well. Fog lights usually refer to automotive fog lights, which are installed at the front and rear of the vehicle to illuminate the road and provide safety warnings during rainy or foggy weather, improving visibility for the driver and other traffic participants.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.