What is the throttle body matching method for the Cruze?

1 Answers
SanBrooklyn
07/30/25 6:05am
For the SAIC-GM Chevrolet Cruze, throttle body matching, also known as initialization, requires disconnecting the negative terminal of the battery for several minutes to allow the vehicle to enter a dormant state. During this process, the vehicle's onboard computer will reset its original memory to factory settings, and then the matching can be completed by restarting the vehicle. The specific steps are as follows: 1. Open the driver's door of the SAIC-GM Chevrolet Cruze. 2. Pull the hood release lever located on the left side of the driver's leg area. 3. Lift the engine hood upwards. 4. Secure the engine hood with the support rod to ensure it is firmly held and to prevent any hazards during the operation. 5. Disconnect the black negative terminal of the battery for more than 5 minutes to allow the vehicle to enter a dormant state. During this time, the onboard computer's original memory will be reset to factory settings. 6. Reconnect the negative terminal of the battery, turn the key, and start the engine to complete the matching process.
Was this review help?
2
0
Share
More Forum Discussions

Can the Tayron's Doors Be Opened After Automatic Locking?

The doors of the Tayron cannot be opened after automatic locking; the driver must press the unlock button inside the vehicle to open the doors. The automatic locking feature activates when the car is started and the brake is pressed, causing all four doors to lock automatically after approximately 10 seconds. This function is designed for anti-theft purposes, ensuring quick locking after starting to drive, which helps prevent door-pull robberies during traffic jams or at red lights, providing a certain level of security. The Tayron is a premium German mid-size SUV, offering four powertrain options: 280TSI, 330TSI, 380TSI, and both two-wheel and four-wheel drive. In terms of body dimensions, the Tayron measures 4595mm in length, 1860mm in width, and 1660mm in height, with a wheelbase of 2731mm.
15
4
Share

What does the wrench symbol on the Volkswagen Lavida dashboard indicate?

When the wrench symbol appears on the Volkswagen Lavida dashboard, it serves as a reminder for the vehicle's scheduled maintenance rather than indicating a malfunction. This symbol does not affect normal driving operations and will disappear after the maintenance service is completed. It's worth noting that this symbol carries the same meaning across all automotive brands, not just Volkswagen. This feature isn't standard on all vehicles; it only appears on models equipped with this functionality. Manufacturers preset a mileage parameter during production - when the vehicle reaches this predetermined mileage, the wrench symbol illuminates to alert the driver about required maintenance. The Lavida represents Shanghai Volkswagen's first independently developed A-segment vehicle and holds significant importance in Volkswagen's global product strategy.
20
5
Share

What are the first maintenance items for the Cadillac XT154?

The regular maintenance items for the first service of the Cadillac XT154 include replacing the oil filter, air filter, fuel filter, and engine oil. Below is relevant information about the first car maintenance: 1. The first maintenance is due at 6 months or 5,000 kilometers. 2. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting, or replacing certain parts of the car, also known as car servicing. 3. The purpose of maintenance is to keep the car clean and tidy, ensure normal technical conditions, eliminate potential hazards, prevent failures, slow down the deterioration process, and extend the usage cycle.
6
4
Share

Where is the VIN number located on the Chery e3?

Chery e3's VIN number is located on the crossbeam under the front passenger seat. You need to lift the carpet to see it. If there is floor covering, you will need to cut it open to view the VIN. The VIN, short for Vehicle Identification Number, is a unique 17-character alphanumeric code used to identify a vehicle's manufacturer, engine, chassis number, and other specifications. The Chery e3 is a compact car equipped with a 1.5L naturally aspirated engine and a 5MT transmission. In terms of body dimensions, the Chery e3 measures 4450mm in length, 1748mm in width, 1493mm in height, with a wheelbase of 2570mm.
8
3
Share

How to Check Tire Pressure on Volkswagen Fuel Tank Cap?

There are two units for tire pressure indicated on Volkswagen fuel tank caps: bar and kPa. For example, 200 kPa equals 2.0 bar, and the normal tire pressure should be around 2.5 bar. Some Volkswagen models also provide various recommended tire pressures based on different numbers of passengers and luggage loads in the trunk. Tires are the only components of a car that come into contact with the ground, and they are crucial for driving stability and safety. Tire pressure should neither be too high nor too low. If the pressure is too low, the tires may exhibit wave-like deformation during high-speed driving, increasing the risk of a blowout. If the pressure is too high, it reduces the contact area between the tires and the ground, negatively affecting the car's handling and driving stability. Volkswagen AG is an automobile manufacturer headquartered in Wolfsburg, Germany, with brands such as Audi and Volkswagen under its umbrella. Main Volkswagen models include sports cars, compact family cars, the EOS coupe, Golf, Bora, Sagitar, and Jetta.
2
0
Share

How Many Models Does the BMW 3 Series Have?

The BMW 3 Series has 7 models, all of which comply with the China VI emission standards and adopt a front-engine, rear-wheel-drive layout. The 2020 BMW 3 Series is the latest model, with a body length of 4719mm, width of 1827mm, height of 1459mm, and a wheelbase of 2851mm. Safety features of the BMW 3 Series include driver and front passenger airbags, front side airbags, front and rear head airbags, seatbelt reminder, rear child seat interface, tire pressure monitoring, run-flat tires, ABS anti-lock braking system, brake force distribution, brake assist, traction control, and electronic stability control. The BMW 3 Series is equipped with a 2.0T turbocharged engine, paired with an 8-speed automatic transmission.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.