What is the three-yield mnemonic of 'yield right to left, yield turning to straight'?

2 Answers
Spencer
07/25/25 1:46pm
Turning vehicles must yield to vehicles going straight. When both vehicles are going straight, the vehicle coming from the right side of the road has the right of way. The left-side vehicle must yield to the right-side vehicle. When vehicles are coming from opposite directions, a right-turning vehicle must yield to a left-turning vehicle. According to regulations, traffic should proceed as follows: Designated lanes: At intersections with designated lanes, enter the appropriate lane based on your intended direction of travel. Entering a roundabout: When preparing to enter a roundabout, yield to vehicles already within the roundabout. When turning left: Turn from the left side of the intersection center point. Activate the turn signal when turning, and use low beams when driving at night.
Was this review help?
17
2
Share
LeConnor
08/11/25 8:53pm
As a new driver who just got my license, I have a deep understanding of the 'three-yield rule': 'right turn yields to left turn, left turn yields to straight.' It essentially means that at intersections without traffic lights, right-turning vehicles must wait for left-turning and straight-going vehicles to pass first, while left-turning vehicles must yield to straight-going ones. When I first started driving, I was always nervous at intersections. Once, when making a right turn at a crossroad, I got overwhelmed by the heavy traffic and almost collided with a left-turning car, which scared me into slamming the brakes. Later, my instructor repeatedly drilled this rule into me, and I memorized it until it became second nature. Now when driving, I always check my mirrors more often, observe my surroundings, and only move when it's safe. This rule protects everyone, making it less likely for beginners like me to make mistakes, especially during rush hours when traffic is heavy. Remembering it makes driving safer and more civilized.
Was this review help?
5
3
Share
Expand All
More Forum Discussions

Does the Shadow Leopard have wireless charging?

The Shadow Leopard does not have a wireless charging function. Introduction to in-car wireless charging: Inside the wireless charging pad, there is a coil that generates a magnetic field when electrified. This magnetic field is then captured by the coil in the phone, converting the magnetic field back into electric current to charge the phone. In-car wireless charging can free users from the constraints of wires, but it has insufficient charging stability, low charging efficiency, and tends to generate significant heat. Introduction to models equipped with in-car wireless charging panels: Currently, many models are equipped with wireless charging panels, such as the GAC Trumpchi GS4, Lynk & Co 01, BMW X3, Roewe RX8, and Cadillac CT6.
19
5
Share

Does the BYD Qin Pro Have Ambient Lighting?

BYD Qin Pro is equipped with ambient lighting, which does not have an independent switch. As the sky gradually darkens, the ambient lighting will automatically turn on along with the headlights. Also known as LED ambient lighting, it is primarily designed to enhance the cabin's aesthetics at night, creating an atmosphere and setting the mood. In terms of body dimensions, the BYD Qin Pro measures 4765 mm in length, 1838 mm in width, and 1500 mm in height, with a wheelbase of 2718 mm. As for the powertrain, the BYD Qin Pro fuel-powered version is equipped with a 1.5T engine across the lineup, delivering a maximum power of 154 horsepower and a peak torque of 240 Nm.
8
1
Share

How to Remove the Rear Seat of the Nissan Sylphy Classic?

The method for removing the rear seat of the Nissan Sylphy Classic is as follows: 1. Reach under the seat cushion and forcefully lift the front part upward until the front hooks are released. This action needs to be performed once on both the left and right front sections; 2. After lifting the front part, insert your left hand under the side, push the seat cushion toward the backrest with your right hand, and while pushing it in slightly, use your left hand to lift the rear part. This action also needs to be performed once on both the left and right sides; 3. After removing the seat cushion, unscrew the three screws under the rear backrest, lift it upward, and the rear backrest can be removed.
9
0
Share

How to Replace the Rear Wiper on a Ford Kuga?

Ford Kuga rear wiper replacement steps: 1. First lift the wiper arm to engage its self-locking mechanism. 2. Then use your right hand to pinch the two dovetail clips. 3. Rotate the wiper blade at a certain angle and pull it upward to remove. 4. Install the new wiper blade by aligning its front notch with the small head of the wiper arm, then pull the blade downward while pinching the two dovetail clips. 4. Rotate the blade clockwise at a certain angle to secure it in position. 5. After confirming proper installation, gently place the wiper arm back onto the windshield. 6. Use the same method to replace the driver-side wiper blade.
6
3
Share

How to Install the Clutch Pedal Spring on a Ford Focus?

The clutch pedal spring of a Ford Focus cannot be installed by yourself and requires professional installation at a repair shop. During driving, the driver can press or release the clutch pedal as needed to temporarily separate and gradually engage the engine and transmission, thereby cutting off or transmitting the power input from the engine to the transmission. The Ford Focus is a compact car under the Ford brand. In terms of body dimensions, the car measures 4647mm in length, 1810mm in width, and 1468mm in height. In terms of power, the Ford Focus is equipped with two engines: a 1.0T and a 1.5T. The 1.0T engine has a maximum power output of 94kw, while the 1.5T engine has a maximum power output of 135kw.
14
3
Share

How to fold down the rear seats of a Volvo S60?

To fold down the rear seats of a Volvo S60, follow these steps: Open the trunk, pull the rear seat release lever labeled 'Release' located at the upper center of the trunk backward, then open the rear door and fold down the rear seats from inside the car. There are two ways to fold down the rear seats of a Volvo S60: 1. Split-folding: When folding down by proportion, the flexibility of the rear seats increases. You can fold down only half of the backrest to accommodate large items while the remaining part can still seat passengers. 2. Full-folding: When folding down entirely, the rear space expands, but it cannot seat passengers.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.