What is the technology behind Benelli's four-cylinder engine?

1 Answers
StAndrew
07/25/25 9:41am
Benelli LF-01 is equipped with a water-cooled L-type four-cylinder engine, featuring four valves per cylinder, an actual displacement of 680cc, and a maximum output power of 72KW at 12,000 rpm. Below are the relevant details: 1. Abandonment of electronic cruise control and electronic throttle system: For large-displacement four-cylinder touring motorcycles, many foreign models are equipped with electronic cruise control and electronic throttle systems. However, Benelli has officially opted out of these two configurations, primarily due to cost considerations. 2. Range: As a touring motorcycle, the focus might also be on its range. However, given the relatively high fuel consumption of a four-cylinder engine, even with a large 20-liter fuel tank, the estimated maximum range is just over 300 kilometers.
Was this review help?
11
2
Share
More Forum Discussions

What is the power output of the 4BD1 engine?

4BD1 engine has a power output of 75KW. Here are the specific details about engine power: 1. Advantages and disadvantages of high-power models: With the same displacement, the higher the power, the better. Some manufacturers use technologies such as intake valve stroke control, EGR, and 5-valve to increase power. High-power models will have higher fuel consumption and increased emissions pollution. 2. Concept: Engine power refers to how fast the engine does work. The engine's power is not equal to the vehicle's power, as there are intermediate losses in mechanical transmission. Designs that thicken and reinforce the body for safety considerations can also lead to a loss of engine power. Therefore, vehicles equipped with small-displacement engines are not necessarily slower or inferior in performance compared to those with high-power engines.
4
4
Share

How Many Years Can a Sedan Be Used?

Small private cars have no usage time limit, but they will be scrapped after traveling 600,000 kilometers. The relevant introduction to mandatory scrapping is as follows: Mandatory scrapping age for cars: Small and micro taxi passenger cars are used for 8 years, medium taxi passenger cars for 10 years, large taxi passenger cars for 12 years, rental passenger cars for 15 years, small long-distance passenger cars for 10 years, medium long-distance passenger cars for 12 years, large long-distance passenger cars for 15 years, passenger cars for 13 years, other small and micro operational passenger cars for 10 years, and large and medium operational passenger cars for 15 years, and so on. Mandatory scrapping standards for cars: Reaching the legally prescribed usage period, still failing to meet the relevant requirements of the national safety technical standards for in-use motor vehicles after repair and adjustment, still failing to meet the relevant requirements of the national standards for in-use motor vehicles after repair and adjustment or the adoption of control technology, and emitting pollutants or noise into the atmosphere.
7
0
Share

How Often Should Car Compressor Lubricant Be Changed?

Generally, car compressor lubricant should be changed every 5,000 kilometers or 7,500 kilometers. Relevant information is as follows: 1. Lubricant: The lubricant used in air compressors is a special compressor-specific oil provided by lubricant manufacturers. The lubricant has three functions: cooling compressed air, sealing rotor meshing gaps, and lubricating bearings, shaft seals, and gears. In fact, most of the oil is used to cool the compressed air. The oil that enters the compression chamber to cool the compressed air comes into direct contact with the air at operating temperatures of nearly 100 degrees, making it highly prone to oxidation and deterioration. Therefore, the cooling lubricant must have excellent oxidation resistance. 2. Formula: The lubricant used in air compressors is formulated with special additives, not only to fully perform the three functions of the lubricant but also to provide characteristics such as oxidation resistance, minimal foaming, and low air solubility. 3. Time: The interval for changing the lubricant depends on actual conditions. Generally, the lubricant must be changed after accumulating 2,000 hours of operation, but this also depends on the customer's usage patterns and frequency.
5
4
Share

What is the correct way to engage reverse gear in a van?

The correct way to engage reverse gear in a van is simply to shift the gear lever to the R position. Below is some relevant information about gear shifting: Function: It allows the vehicle to operate at a very low and stable speed, which would be difficult to achieve with just the internal combustion engine's minimum stable speed. The reverse gear in the transmission enables the vehicle to move backward, while the neutral gear allows the engine to be separated from the drivetrain for extended periods during engine start-up, parking, and coasting. Operating essentials: Start in 1st gear, then shift to 2nd gear when the tachometer needle reaches around 2000 RPM. Shift to 3rd gear when the tachometer again reaches around 2000 RPM. Then, observe the speedometer and shift to 4th gear when the needle points to approximately 40 km/h. At this point, the vehicle can cruise for a while. When the speedometer needle reaches around 60 km/h, you can shift to the highest gear, 5th. This shifting technique ensures smooth vehicle operation and generally prevents insufficient power issues.
12
0
Share

What are the symptoms of a faulty car air conditioning amplifier?

When the car air conditioning amplifier is faulty, it can cause the vehicle's air conditioning system to fail in cooling and functioning properly. Here is additional information: 1. Introduction: Car air conditioning refers to the air conditioning device installed in vehicles, which can cool, heat, ventilate, and purify the air inside the cabin, providing a comfortable environment for passengers, reducing driver fatigue, and enhancing driving safety. The air conditioning system has become one of the indicators to measure whether a car is fully equipped. 2. Composition: Generally, it includes a cooling device, heating device, and ventilation device. This integrated system makes full use of the limited space inside the car, featuring a simple structure and easy operation, making it a popular modern car air conditioning system internationally.
7
2
Share

Where is the crankshaft mark on the 4D24 engine?

4D24 engine crankshaft mark is located at the top dead center position of the first cylinder compression. The following are the specific details of the 4D24 engine: 1. Features: The 4D24 engine has the advantages of high power, good cold start performance, wide application range, good fuel economy, low noise, compact structure, precise coordination, high reliability, and low emission performance. It is mainly used as the power source for 0.75-1.5T light vehicles. 2. Positioning: The 4D24 engine is a light vehicle diesel engine model independently developed by Beijing Foton Environmental Power Co., Ltd., fully compliant with Euro II emission regulations.
14
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.