What is the symbol for the defogger button?

2 Answers
LaDeclan
07/24/25 9:49pm
The symbol for the defogger button is a fan-shaped pattern with three upward-pointing arrow lines, indicating front window defogging, while a rectangular frame symbol represents rear window defogging. Fogging on vehicle glass is a common issue that can easily lead to accidents due to reduced visibility. Proper use of the window defogging function can effectively reduce traffic accidents caused by fogging. In extremely humid weather, avoid using the defogging mode while the air conditioning is operating. The temperature difference between the outside air and the windshield can cause fogging on the outer surface of the windshield, obstructing the driver's view. When the humidity inside the car is high, the windows are prone to fogging. Turning on the AC switch can dehumidify the air from the vents, effectively defogging the windshield.
Was this review help?
3
5
Share
BrodyDella
08/10/25 2:46pm
The defrost button usually features a fan-shaped glass with three upward-wavy lines, specifically designed to tackle fogging on the windshield. Having driven for ten years and seen dozens of car models, I can confirm that almost all vehicles use this symbol. It's typically placed near the air conditioning panel alongside the square rear-window heater icon. Pressing it activates maximum airflow directed at the windshield. Key tip: For quick defogging, remember to turn on the A/C switch to engage the air conditioner in dehumidification mode – just blowing warm air alone will make the glass even blurrier. Windshield fogging during rainy drives is extremely dangerous, making this button an absolute lifesaver.
Was this review help?
20
4
Share
Expand All
More Forum Discussions

Where does the Erguang Expressway run from and to?

The Erguang Expressway runs from Erenhot City in Xilin Gol League, Inner Mongolia Autonomous Region, to Guangzhou City in Guangdong Province. The total length of the Erguang Expressway is 2,685 kilometers, passing through six provinces and regions: Inner Mongolia, Shanxi, Henan, Hunan, Hubei, and Guangdong. It is a major north-south transportation artery in China, facilitating information exchange and personnel movement between the north and south. Expressways are not only an important symbol of modern transportation but also a significant indicator of a country's modernization. Expressways are multi-lane roads designed exclusively for motor vehicles, with separate lanes for different directions and fully controlled access. The average annual daily traffic volume on expressways should ideally exceed 15,000 passenger car units, with a design speed ranging from 80 to 120 kilometers per hour.
18
4
Share

How Many Kilometers Should Transmission Fluid Be Changed?

Automobile transmissions mainly include manual MT transmissions, automatic AT transmissions, CVT continuously variable transmissions, and DSG transmissions. Below are the replacement intervals for each type of transmission fluid: 1. Manual MT transmission fluid is the cheapest to replace and has a relatively long replacement interval, generally usable for about 80,000 kilometers, with most models requiring approximately 3 liters. 2. AT automatic transmission fluid is typically changed every 40,000 kilometers, with the total fluid capacity being 6-8 liters. However, due to structural reasons, it usually cannot be completely replaced in one go. 3. CVT fluid is generally replaced based on the deterioration level indicated by the computer system, but it is recommended to replace CVT fluid preferably between 60,000 to 80,000 kilometers.
5
4
Share

What is the Standard for Headlight Adjustment?

Standard for Headlight Adjustment: Park the vehicle to be inspected on a level ground. Move the inspection device to the front of the vehicle, ensuring the lens surface of the device is (30±5) cm away from the headlight's diffuser lens. Adjust the height of the device box to match the height of the headlight center from the ground. Below are the standard steps for headlight adjustment: 1. Inspection and adjustment of beam direction: Turn on the low beam of the headlight to be inspected. The beam passes through the lens of the device box and projects onto the screen inside the box. Visually observe through the viewing window and rotate the beam direction selection knob until the horizontal segment of the cutoff line (i.e., the light pattern) aligns with the solid line on the screen. 2. Inspection and adjustment of beam intensity: After verifying the low beam direction, press the low beam button to inspect the luminosity of the dark area. The device sets the maximum luminosity of the dark area at 625cd. Values below this are in the green zone (pass), while values exceeding it are in the red zone (fail).
3
5
Share

What do the letters on tires represent?

Tires generally have two letters, the first letter represents the tire type, and the second letter represents the maximum speed the tire is allowed to reach. Taking the tire specification 245/45R1896Y as an example: 1. 45: Represents the aspect ratio of the tire. This value usually ranges between 30-80, with a lower number indicating a thinner sidewall. 2. R: Indicates the type of tire. 'R' and 'Z' represent radial tires, 'X' represents high-pressure tires, and '-' represents low-pressure tires. 3. 18: Indicates the wheel size the tire is suitable for. The number 18 means this tire is suitable for wheels with a diameter of 18. 4. 96: Represents the maximum load a single tire can bear. The higher the number, the greater the load the tire can withstand. 5. Y: The so-called speed rating, which is the maximum speed the tire is allowed to reach. Different numbers represent different speed levels. Exceeding the maximum speed of the tire may lead to dangers such as a blowout.
14
1
Share

Can I skip the scheduled Subject 1 exam?

Failure to attend the scheduled Subject 1 exam will be considered as voluntary abandonment and treated as a failing grade. Below are specific details about Subject 1: Consequences of absence: According to Article 36 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses" (Ministry of Public Security Order No. 123), applicants who cannot attend the exam at the scheduled time must apply to cancel the appointment one day in advance. If an applicant fails to attend the exam at the scheduled time without prior cancellation, the exam will be marked as a failure. Missing the exam after successful scheduling counts as abandonment, which is treated as a failing grade. You can reschedule the exam, but you will need to pay a retake fee. There is no limit to the number of retakes for Subject 1, so there's no need to worry about it, except for the retake fee. Introduction to Subject 1: The exam content includes the most basic knowledge of driving theory, road safety laws and regulations, traffic signals, traffic rules, and local regulations. The scheduling of the driver's theory exam is arranged by local vehicle management offices. Subject 1 is part of the teaching and examination outline for motor vehicle driver training. This outline divides the examination into three subjects, organized by the traffic management departments of public security authorities. The exams proceed in the order of Subject 1, Subject 2, and Subject 3. Passing the previous subject allows you to proceed to the next; failing the previous subject requires continuing with the next subject's exam.
14
0
Share

What is the difference between buying a car at a 4S store and an auto trade store?

Differences between buying a car at a 4S store and an auto trade store: 1. Price difference: Since they are not subject to the manufacturer's price control, prices are adjusted according to the market. In most cases, auto trade stores generally offer cheaper prices. 2. Insurance difference: The insurance discounts at 4S stores are relatively low, but the final total insurance price is higher than at secondary stores, which is clearly due to different prices from different insurance companies for the same type of insurance. 3. After-sales difference: 4S stores are sales outlets that integrate car sales, maintenance, parts, and information services, while secondary stores lack sufficient after-sales support. If a secondary store drives and repairs the vehicle without authorization, even if the vehicle is still under warranty, it cannot enjoy the services provided by the 4S store during the warranty period. 4. Vehicle source difference: 4S stores are authorized dealers of brand manufacturers and only sell models of one brand, while auto trade stores can sell models of multiple brands. 4S stores refer to the overall sales, maintenance, after-sales, and parts sales of cars, while auto trade stores only sell cars and do not provide after-sales services (some have independent after-sales service guarantees).
13
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.