What is the symbol for the car air conditioner?

3 Answers
ReeseAnn
07/29/25 1:50am
The symbol for turning on the car air conditioner is the A/C switch button. AUTO is the automatic air conditioner button. When this function is activated, it automatically adjusts and controls the temperature and airflow of the air conditioner based on information obtained from sensors inside and outside the car, maintaining a comfortable temperature inside the vehicle and eliminating the hassle of manual adjustments. Components of the car air conditioning system: 1. Ventilation system: Ensures indoor ventilation while the car is in motion, continuously introducing fresh air into the car interior and expelling dust, carbon dioxide, and harmful gases from the engine. 2. Heating system: Heats the air inside the car or fresh air entering from outside, providing warmth and dehumidification. 3. Cooling system: Reduces the interior temperature when the external environment is hot, ensuring passengers feel cool and comfortable. 4. Air purification system: Filters the incoming air and continuously removes polluted gases from the car interior to maintain clean air inside. 5. Control system: On one hand, it controls the temperature and pressure of the cooling and heating systems; on the other hand, it manages the temperature, airflow, and direction of the air inside the car to optimize all functions of the air conditioning system.
Was this review help?
18
1
Share
VanAmelia
08/12/25 11:46am
When I first bought my car, I couldn't tell the difference between the air conditioning buttons either. The most noticeable ones were the blue snowflake ❄️ and the red sun ?. The snowflake is for cold air, and the sun is for warm air. There's also a fan icon with rotating arrows that controls the wind speed—my daughter always loves pressing that one randomly. Nowadays, many cars design the A/C button as illuminated letters, making it especially convenient to find when driving at night. The AUTO button for automatic air conditioning is the simplest—just press it, and the system adjusts the temperature by itself. Older cars liked to use a composite pattern of a snowflake and a fan, but now, most new cars come with large touchscreens where the air conditioning symbols directly display the temperature in numbers.
Was this review help?
12
4
Share
Expand All
ReaganAnn
10/02/25 3:09am
As an enthusiast who has been tinkering with automotive circuits for years, the design of air conditioning symbols is truly meticulous. The most common ones are the blue snowflake symbol for activating the compressor's cooling function and the red sun symbol for turning on the heater core. Modern car control panels have higher integration, such as the button with a fan-shaped pattern for the front windshield defogger and the one labeled REAR for independent rear temperature control. Hybrid models often mark their air conditioning buttons with EV mode priority switching. I recommend checking the icon descriptions before using the car, especially for touchscreen vehicles like Tesla, where the air conditioning icons are hidden in secondary menus and not very intuitive.
Was this review help?
17
1
Share
Expand All
More Forum Discussions

How to Use the Car Cigarette Lighter?

The method of using the car cigarette lighter is as follows: 1. Turn on the car's power, insert the cigarette lighter into the car's power socket, and press down to lock it; 2. When the heating element of the cigarette lighter reaches a certain temperature, it will automatically pop out, or wait for 5 to 8 seconds until the heating element turns red, then it can be manually removed. After lighting the cigarette, place the cigarette lighter back into the power socket. The cigarette lighter can also be used as a car power source, but when using it, it is not recommended to use electrical appliances with a power exceeding 120W. If the power of the electrical appliance is too high, it may cause the cigarette lighter's circuit to overload and be damaged.
20
0
Share

Should the Hybrid Odyssey Use 92 or 95 Octane Gasoline?

Hybrid Odyssey should use 92 octane gasoline, as this is the fuel grade officially recommended in the vehicle's user manual. In addition to checking the appropriate gasoline grade in the user manual, the Hybrid Odyssey's fuel cap will also indicate the recommended grade. You can usually determine the suitable gasoline grade based on the engine's compression ratio. Vehicles with an engine compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. If the compression ratio is even higher, 98 octane gasoline is recommended. However, with the application of new technologies, the compression ratio alone cannot determine the gasoline grade, as high compression ratios can also be tuned to use lower octane gasoline. Other factors, such as ignition timing, turbocharging technology, and Atkinson cycle technology, also play a role. Generally, the higher the gasoline grade, the higher the octane number and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If the Hybrid Odyssey occasionally uses the wrong gasoline grade, simply switch back to the correct grade after consumption. However, prolonged use of the wrong gasoline grade can have the following effects: For vehicles recommended to use lower octane gasoline, accidentally using higher octane gasoline will not cause damage. However, the increased octane number may alter the fuel's ignition point, leading to delayed combustion in the engine. This reduces the engine's power output and thermal efficiency, resulting in poorer performance. For vehicles recommended to use higher octane gasoline, using lower octane gasoline can cause engine knocking. Due to the significantly lower octane number, the gasoline may ignite prematurely during the compression stroke before the spark plug fires. This premature ignition creates resistance during the upward stroke, making the engine run very unevenly. If the knocking is mild, it may only increase noise without obvious engine damage. However, severe knocking indicates serious engine conditions, affecting not only driving stability but also causing abnormal wear on pistons and cylinders, and in extreme cases, cylinder scoring.
10
3
Share

What engine does the Audi RS7 have?

The Audi RS7 is equipped with a 4.0T twin-turbocharged engine. The Audi RS7 is a high-performance mid-to-large-sized sedan, and the maximum power output of this engine is 445 kW, with a maximum torque of 750 Nm. The engine reaches its peak power at 6,100 to 6,800 rpm and its maximum torque at 2,500 to 5,500 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with an 8-speed automatic transmission. The front suspension of the Audi RS7 utilizes a lightweight four-link independent suspension, while the rear suspension employs a trapezoidal-link independent suspension. The Audi RS7 also comes with a full-time all-wheel-drive system, which enhances the vehicle's mechanical grip and improves cornering speed.
18
3
Share

What are the causes and solutions for car pulling to one side?

Causes and solutions for car pulling to one side: 1. Uneven tire pressure on both sides of the car. If the tire pressure on both sides of the car is inconsistent, with one side higher and the other lower, the car will pull to the side with lower tire pressure. In this case, simply inflate the underinflated tire. It should be noted that the normal tire pressure for car tires is between 2.3bar and 2.5bar. 2. Uneven tire wear on both sides. Uneven tire wear on both sides of the car can also cause the vehicle to pull to one side. When the tires are excessively worn, they should be replaced promptly, or the front and rear tires should be rotated after the car has traveled 60,000 kilometers to balance the wear on the car tires. 3. Incorrect wheel alignment. If the car has not undergone a four-wheel alignment after getting new tires, it may also cause the vehicle to pull to one side. In this case, a four-wheel alignment should be performed on the vehicle. 4. Steering gear malfunction. There are many reasons why a malfunctioning steering gear can cause the car to pull to one side. It is necessary to go to a repair shop or 4S store for professional inspection and repair.
9
5
Share

How many seconds does the Wrangler take to accelerate from 0 to 100 km/h?

The Wrangler's 0-100 km/h acceleration time is affected by its body structure, achieving 8.19 seconds. The vehicle is equipped with a 2.0-liter 266-horsepower four-cylinder turbocharged engine, paired with an eight-speed automatic transmission. The engine delivers a maximum power of 195.4 kW and a maximum torque of 400 N·m. If it weren't a hardcore off-road vehicle, its 0-100 km/h performance could be even better. All Wrangler models come with a part-time four-wheel-drive system featuring front-mounted four-wheel drive. The vehicle uses a body-on-frame construction, with a multi-link solid axle front suspension and a multi-link solid axle rear suspension, providing better off-road capability. The Wrangler's water-cooled mid-mounted intercooler ensures stable intake temperatures during prolonged off-road driving, while its VT twin-screw mechanical supercharger delivers high torque at low RPMs.
14
0
Share

What to Do When the Built-in Tire Pressure Sensor Runs Out of Battery?

The built-in tire pressure monitoring system requires battery replacement when it runs out of power. The batteries used in built-in tire pressure monitors are generally disposable, with higher-quality ones lasting 3 to 5 years and lower-quality ones lasting 2 to 3 years. When the battery dies, it means the tire pressure monitoring system has reached the end of its life and needs to be replaced entirely. The built-in tire pressure monitoring system uses pressure sensors installed inside each tire to directly measure tire pressure. A wireless transmitter sends the pressure information from inside the tire to a central receiver module, which then displays the data for each tire. The system automatically alerts when tire pressure is too low or there is a leak. In contrast, external tire pressure monitoring systems use sensors that replace the valve cap, fitting directly onto the valve stem. By pressing the valve core inward, the internal tire pressure is released, allowing direct detection of tire pressure and temperature. The built-in system is less affected by external temperature and road conditions, has a longer lifespan, and does not require frequent disassembly, making it more stable. However, since the sensors are installed inside the tire, professional installation at a repair shop is necessary, and wheel balancing must be performed.
17
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.