What is the symbol for car fog lights?

2 Answers
OBrody
07/24/25 2:51pm
Detailed introduction to car fog light symbols is as follows: 1. The front fog light symbol consists of three diagonal lines on the left crossed by a curved line, with a semi-oval shape on the right. 2. The rear fog light symbol features a semi-oval on the left and three horizontal lines on the right, crossed by a curved line. Relevant information about fog lights includes: 1. When driving under adverse weather conditions such as fog, snow, heavy rain, or in smoke-filled environments, front fog lights must be used to illuminate the road ahead and ensure driving safety. 2. The shade inside the front fog light is designed to block the light from the filament that would otherwise reflect off the upper part of the reflector, creating a clear cut-off line in the light distribution pattern—dark above and bright below. 3. In the visible area at the upper edge of the light distribution, it should be as dark as possible, while the bright area at the bottom should have a horizontal diffusion angle of 50° on both sides, forming a bright horizontal zone to provide good lighting conditions for safe driving without causing glare.
Was this review help?
15
2
Share
Evelyn
08/11/25 8:33am
I've been driving for many years, and the fog light symbols are quite common. The front fog light on the dashboard has a wavy line with a small bulb icon slanting to the lower left, shaped like fog pressing downward, indicating the light illuminates nearby fog. The rear fog light has a wavy line with a small bulb slanting to the upper right, serving as a warning to vehicles behind. I remember one time driving in heavy fog, I searched for the symbol for a long time. It's usually hidden on the edge of the dashboard, and some cars have a switch on the light control lever—you have to press it correctly to turn it on. Safety first! In foggy conditions, you should turn them on in advance, but don't use them in clear weather to avoid blinding others. Many beginners mistakenly use the rear fog light as a regular taillight, making it hard for drivers behind to see clearly and increasing the risk of rear-end collisions. When checking, always refer to the manual—each car has slight design differences, so don’t take it lightly.
Was this review help?
19
1
Share
Expand All
More Forum Discussions

What Causes the Malfunction Light to Flash, Engine to Shake, and Lack of Power When Accelerating?

Malfunction light flashing, engine shaking, and lack of power when accelerating indicate poor combustion of the air-fuel mixture in the engine. When the mixture in the cylinder is too rich, the vehicle may experience knocking and shaking; when the mixture is too lean, the vehicle may exhibit poor acceleration. If the issue is not related to the air-fuel mixture, it could be due to faulty spark plugs, high-voltage wires, or ignition coils. Poor performance of the ignition system or inadequate spark plug firing can also cause the engine malfunction light to illuminate. Engine maintenance precautions include: Do not blindly remove the engine thermostat. Removing the thermostat due to high engine temperature will cause the coolant to circulate only in a large loop, unable to regulate cooling intensity, making it difficult to ensure the engine operates at an appropriate temperature.
12
3
Share

Can a car battery still be used after sitting for 6 months?

A car battery cannot be used after sitting for 6 months due to internal sulfation and passivation. Precautions for battery storage: Keep away from metal objects; Do not store in damp places; Do not store in extremely cold locations; Do not store in high-temperature areas; Recharge the battery every month. Methods to determine the condition of a car battery: Over 80% of maintenance-free batteries currently have a charge indicator window. The colors visible in the observation window are generally divided into three types: green, black, and white. Green indicates sufficient charge, black indicates slight discharge, and white means the battery is dead and needs replacement. Refer to the label on the battery for specific details. Observe whether there are white or green powdery substances around the battery terminals. These are battery oxides. High-quality or new batteries generally do not easily develop these oxides. Once they appear, it means the battery's performance is starting to deteriorate.
12
3
Share

What materials are needed to renew a driver's license and where to renew it?

Renewing a driver's license requires the following materials: the identity proof of the motor vehicle driver, the motor vehicle driver's license, a medical condition certificate issued by a county-level or above medical institution or a military medical institution at the regimental level or above. For those applying to drive a small automatic transmission passenger vehicle specially designed for the disabled, a medical condition certificate issued by a specialized medical institution designated by the provincial health authority must be submitted. Take the required materials to the vehicle management office where the driver's license was originally issued to apply for renewal. A driver's license, also known as a 'driving license,' is a certification document issued by the government transportation department to individuals who meet the qualifications for driving. It is usually a card. To obtain a driver's license, one must meet the minimum age requirement and pass a driving test.
4
1
Share

What to Do If a Car Accumulates 72 Points During Annual Inspection?

If a car accumulates 72 points during annual inspection, go to the traffic violation processing office with the following documents: 1. Required documents: Bring your ID card, driver's license, and vehicle registration certificate to the traffic violation processing office. Submit these documents to the staff, who will retrieve the violation records to confirm if the vehicle has committed any traffic offenses. Once confirmed, the staff will print out the penalty decision. 2. Regulations: According to Article 68 of the 'Regulations on the Application and Use of Motor Vehicle Driving Licenses,' if a motor vehicle driver accumulates 12 points within a scoring cycle, the traffic management department of the public security authority shall detain their motor vehicle driving license. The driver must report to the traffic management department of the public security authority where the license was issued or where the violation occurred within 15 days to attend a seven-day course on road traffic safety laws, regulations, and related knowledge.
6
3
Share

How to reset the maintenance light on GAC Trumpchi GS8?

The method to reset the maintenance light on GAC Trumpchi GS8 is: 1. Turn on the ignition switch; 2. Select the odometer mode on the instrument panel; 3. Turn off the ignition switch; 4. Hold the instrument button while turning on the ignition switch; 5. After a while, the odometer screen will display the timing belt maintenance mode, adjust the button to select 15 or 20; 6. Hold the button to confirm and turn off the ignition switch. The GAC Trumpchi GS8 is a mid-size 5-door 7-seat SUV with body dimensions of: length 4835mm, width 1910mm, height 1785mm, wheelbase 2800mm, equipped with a 2.0T turbocharged engine and a 6-speed automatic transmission, with a maximum power of 185 kW and a maximum torque of 390 Nm.
19
2
Share

What is the reason for the EPC warning light in JAC trucks?

JAC truck's EPC light indicates that the engine temperature is too high, which is caused by the engine oil level being below the normal height. It is necessary to add engine oil to cool it down, and the light will automatically turn off. Below is relevant information about EPC light faults: 1. Explanation of reasons: The EPC warning light staying on indicates a fault in the engine management system or electronic control, often accompanied by unstable idling or engine cold start shaking. However, for domestic vehicle owners, this is usually caused by the quality of domestic fuel and a dirty driving environment. It is recommended to drive to a maintenance service station as soon as possible for inspection and repair. In most cases, cleaning the throttle body can resolve the issue. 2. Precautions: If the EPC light is on without any fault symptoms, you can continue driving, but timely maintenance and inspection are still required.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.