···
Log in / Register

What is the symbol for adding windshield washer fluid?

4 Answers
Gretchen
08/30/25 7:45am

There is a spray pattern on the blue plastic cap, and the inlet for adding windshield washer fluid has corresponding markings. Locate this marking to add the fluid. Below are the functions and selection criteria for windshield washer fluid: Functions of windshield washer fluid: Windshield washer fluid typically has wetting, penetrating, and solubilizing functions, thereby serving to clean and remove dirt. The presence of alcohol and ethylene glycol significantly lowers the freezing point of the liquid, providing antifreeze properties and quickly dissolving frost. Selection of windshield washer fluid: In autumn and winter, windshield washer fluid should have excellent cleaning and antifreeze performance. Winter windshield washer fluid is selected based on its antifreeze properties, and you should choose a fluid with a freezing point at least 10 degrees Celsius below the local minimum temperature.

Was this review help?
10
0
Share
Frodo
09/12/25 4:41am

The windshield washer fluid symbol is a spray or wiper icon that's easily visible after opening the hood, typically featuring a blue cap with water droplet or spray patterns. When I first started driving, I got confused too - couldn't find it and accidentally poured into the coolant reservoir, which almost caused problems. Later, a friend showed me it's located near the front wheels with a distinctly colored cap. Remember to top up washer fluid regularly: use antifreeze type in winter to prevent freezing, and standard type in summer. It's not just about keeping the windshield clean - clear visibility is crucial for road safety. If you can't locate it, check your vehicle manual or ask someone knowledgeable rather than tampering with other components.

Was this review help?
13
5
Share
Expand All
LaneFitz
10/26/25 5:30am

I noticed the windshield washer fluid indicator is quite simple - just a small spray symbol on a blue cap, sometimes labeled "WASHER FLUID" in English. As an experienced driver, I must emphasize its location near the front left side of the engine compartment - don't confuse it with the green coolant cap. I make it a habit to check the washer fluid level monthly and top it up when low, especially during rainy seasons when the spray system gets heavy use. Timely refills ensure smooth operation without malfunctions. When choosing washer fluid, consider the weather - use winter formula in cold regions to prevent freezing. Most importantly, adding fluid to the wrong reservoir could damage your vehicle, so always double-check that symbol before proceeding.

Was this review help?
13
1
Share
Expand All
LoganFitz
12/09/25 5:49am

From the perspective of proper vehicle maintenance, identifying the windshield washer fluid symbol is crucial. It typically features a water spray image on a blue cap, located under the hood near the windshield. This simple marking helps avoid incorrect addition to other fluid compartments, which could otherwise cause blockages or contamination. Personally, I prioritize using eco-friendly windshield washer fluid to reduce chemical emissions and prevent harmful substances from entering the wiper system. If the symbol becomes faded, regularly clean or replace the cap to maintain visibility. During maintenance, take a moment to check the fluid level – these simple steps can significantly extend your vehicle's lifespan.

Was this review help?
9
2
Share
Expand All
More Forum Discussions

What is the difference between an electronic parking brake and autohold?

The differences between an electronic parking brake and autohold are: 1. Different symbols: The symbol for the electronic parking brake is 'P'; the symbol for autohold is 'A'. 2. Different functions: The electronic parking brake achieves parking by clamping the friction between the brake shoes and the brake drum or between the friction pads and the brake disc; autohold is an extension of ESP, allowing the driver to avoid prolonged braking when the vehicle is stopped, preventing unnecessary sliding of the vehicle. The method of using the electronic parking brake is: 1. Press the electronic parking brake to stop braking; 2. Lift the electronic parking brake to start braking. The method of using autohold is: 1. In situations requiring short stops, such as at traffic lights, the system will automatically brake the wheels after the vehicle comes to a stop to prevent rolling; 2. When starting on an uphill slope, the system will automatically brake to prevent rolling backward.
12
1
Share

How to Enable the Horn Sound When Locking the Baojun 510?

To enable the horn sound when locking the Baojun 510: 1. Press and hold the unlock or lock button on the remote key for more than 3 seconds to switch between audible and silent locking. 2. To restore the horn sound, simultaneously press and hold both the lock and unlock buttons for 3 seconds. Below are more details about the Baojun 510: 1. The Baojun 510 is a compact 5-door, 5-seat SUV with dimensions of 4220mm in length, 1740mm in width, and 1615mm in height, and a wheelbase of 2550mm. 2. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 73 kW and a maximum torque of 135 Nm. The front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
17
2
Share

How to Drive a Manual Transmission Car in Crowded Areas

When driving a manual transmission car in crowded areas, follow these steps: 1. Engage first gear only to avoid collisions, minimize shifting hassle, and maintain better speed control. 2. Keep your foot on the clutch in a semi-engaged state. To move forward, slightly release the clutch while gently pressing the accelerator. To slow down, depress the clutch and ease off the accelerator. To stop completely, apply the brakes. In heavy traffic or densely populated areas where frequent stopping and starting is required, vehicle control becomes crucial. Regardless of the method used, the primary goal is speed regulation. Technique is just one aspect - equally important is possessing proficient driving skills, quick reflexes, and sharp mental alertness. Never drive after consuming alcohol. Road safety is paramount, and every driver must prioritize safe driving awareness.
8
1
Share

What are the correct steps to use the Volkswagen Passat electronic parking brake?

Volkswagen Passat electronic parking brake correct usage steps: Step on the brake pedal, shift to P or N gear, then pull up the electronic parking brake button with your finger. Below is relevant information about the electronic parking brake: 1. The electronic parking brake serves the same function as a traditional handbrake but offers improved performance. 2. The electronic parking brake is part of the Electronic Parking Brake (EPB) system. The EPB system integrates temporary braking during driving with long-term parking braking functions, all controlled electronically to achieve parking brake technology. 3. The electronic parking brake implements parking brake technology through electronic control. Its working principle is the same as that of a mechanical handbrake, both achieving parking brake control through friction generated between the brake disc and brake pads, except that the control method changes from a mechanical handbrake lever to an electronic button.
11
4
Share

How to Read the Fuel Gauge Display on a Mercedes-Benz C200?

The fuel gauge of the Mercedes-Benz C200 is displayed at the lower part of the left instrument cluster pod. '0' indicates empty, while '1' indicates full, with multiple segments in between showing the fuel level. Here are some related details: 1. With the engine idling, transmission in P position, and transmission oil temperature at 45°C, loosen the transmission oil pan drain plug. It's normal for bubbles to appear when the transmission oil flows out. The transmission oil and filter should be replaced every 60,000 km for Mercedes-Benz vehicles. Within 60,000 km, there's no need to check the transmission oil level unless there are oil leaks under the vehicle. 2. The Mercedes-Benz C200 is equipped with a 722.6 transmission (model A000-989-2103). The oil should be added from the fill tube located behind the engine on the left side of the engine bay. After adding 6.5 bottles of oil, the oil level must be checked. A relatively long dipstick is required to check the oil level.
7
5
Share

What are the reasons why the car charging cable cannot charge?

The following are the specific reasons why the car charging cable cannot charge: 1. Fuse blown: The fuse of the vehicle's USB charging port is blown. Refer to the vehicle's user manual to locate the corresponding fuse. If it is blown, promptly replace it with a spare fuse; the data cable is damaged; the phone's charging port spring is loose, resulting in poor contact. 2. Insufficient current output: Check the application range of the USB charging port in the vehicle's user manual. Generally, USB ports used only for data reading have a current output of 0.5A, while phone charging ports require at least 1A current output.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.