What is the suspension system of the Volkswagen Lavida?

Can You Make a U-Turn When the Left-Turn Signal is Red?

Whether you can make a U-turn when the left-turn signal is red depends on three scenarios: 1. If there is a no-left-turn sign at the intersection, you cannot make a U-turn when the left-turn signal is red. 2. If there is no no-left-turn sign at the intersection, you can make a U-turn when the left-turn signal is red. 3. Before reaching the stop line, if there is a dashed-line gap in the middle of the road, you can make a U-turn as long as there is no no-U-turn sign at the gap; if there is a no-U-turn sign or a solid line at the gap, you must proceed to the stop line position to make a U-turn. The following situations prohibit U-turns: 1. U-turns are not allowed on crosswalks. 2. U-turns are not allowed when there is no left-turn lane. 3. U-turns are not allowed if there is a no-U-turn or no-left-turn sign. 4. U-turns are not allowed when the center line of the road is a solid yellow line. 5. U-turns are not allowed on yellow grid lines.

6

1

Share

How to Break in an Automatic Transmission?

Automatic transmission new car break-in period techniques are as follows: 1. Pay attention to the break-in mileage: The break-in mileage for a new car is generally 1000 to 3000 kilometers. 2. Emphasize warming up the car: Do not start driving immediately after starting the car; wait until the water temperature reaches the normal temperature before starting. 3. Pay attention to changing speeds: Avoid maintaining a constant speed for extended periods. Unlike manual transmissions where you can select gears for break-in, automatic transmissions can only achieve this through continuous speed variations. 4. Avoid heavy load during break-in: During the specified break-in mileage, try to drive with no load or light load and avoid full capacity. 5. Check equipment: Before hitting the road, test all the gauges to ensure they display normal functions for all parts.

5

0

Share

Differences Between Automatic and Manual Transmission Cars

Differences between automatic and manual transmission cars are as follows: 1. Automatic transmissions use hydraulic fluid for power transmission, while manual transmissions rely on mechanical gears. 2. Since automatic transmissions control speed solely through throttle input, they generally have higher fuel consumption. 3. Manual transmissions require the driver to control vehicle speed by operating the throttle, brake, and clutch; automatic transmissions only need acceleration and deceleration inputs, with the computer handling throttle, brake, and clutch operations. 4. Generally, automatic transmission cars are more expensive than manual ones; automatic transmissions don't require left foot operation. So-called automatic transmission cars are vehicles that drivers can operate without using a clutch. The machine automatically shifts gears based on vehicle speed, though these cars typically have slower acceleration. Manual transmission cars require the driver to shift gears themselves, deciding which gear to use based on experience - they usually have faster acceleration, which is why racing cars predominantly use manual transmissions.

8

1

Share

The Difference Between Coolant and Cooling Water

Coolant and cooling water each have their own functions: 1. The role of automotive coolant: Coolant is an indispensable part of a car engine. It circulates within the engine cooling system, carrying away excess heat generated during engine operation, allowing the engine to operate at normal working temperatures. When coolant is insufficient, it will cause the engine water temperature to rise too high, leading to damage to engine components. Once a car owner discovers insufficient coolant, it should be promptly replenished. 2. The role of cooling water: In the engine's cooling system, the thermostat controls the water within the engine body, directing it to the radiator, where the water in the radiator dissipates heat through the airflow from the cooling fan. There is also a crucial aspect to this, which is the material and function of the cooling water. Depending on the design of different manufacturers, engine temperatures are not always below 100°C. Ordinary water boils at 100°C, and once water boils and turns into steam, it can no longer absorb heat. The inability to absorb heat will cause engine damage, so cooling water cannot be replaced or supplemented with ordinary water. Using coolant is the standard practice.

20

2

Share

How to Reset the Maintenance Wrench Light on Honda Envix?

To reset the maintenance wrench light on Honda Envix, first turn off the ignition switch to cut off the power supply to the car. Then, press and hold the button on the right side of the dashboard with your left hand. While holding the button, turn on the ignition with your right hand to power up the car. Continue holding the button until the maintenance wrench light goes off, indicating that the reset is complete. Here is some additional information about the car maintenance wrench light: 1. The maintenance wrench light is a reminder that lights up during driving to indicate that the vehicle requires maintenance. Not all vehicle models allow manual reset; some models require specialized equipment from the manufacturer to clear the code. 2. The function of the car maintenance indicator light is to record the mileage of important components, similar to a timer in a sprint race. It serves to remind the car owner and maintenance personnel. 3. After maintenance is completed, there is a procedure to reset the maintenance light to zero. If not reset, the indicator light will remain on even after maintenance has been performed.

16

2

Share

How to Determine the Quality of an Electric Vehicle Battery?

Methods to determine the quality of an electric vehicle battery are as follows: 1. Assess the battery's external packaging: (1) Check if the outer packaging is damaged or has been opened. (2) Inspect the battery's appearance for any scratches or rust at the positive and negative terminal connections. (3) Verify the presence of anti-counterfeit labels on the battery casing, check if the production date is too old, and ensure that manufacturer-related information and markings are complete and clearly written. 2. Test the battery's performance during a trial run—install a fully charged battery into the electric vehicle, start the power, and suddenly accelerate while riding to observe the changes in the battery gauge: (1) If the battery gauge pointer drops by less than half a division during acceleration, the battery is likely new or of good performance. (2) If the pointer drops by 1 or 2 divisions during acceleration, the battery is probably old or of poor quality. (3) If the pointer drops by 3 or 4 divisions during acceleration, the battery is likely a refurbished product from a scrapped battery, posing as new, and of very poor quality.

17

5

Share

What is the suspension system of the Volkswagen Lavida?

Can You Make a U-Turn When the Left-Turn Signal is Red?

How to Break in an Automatic Transmission?

Differences Between Automatic and Manual Transmission Cars

The Difference Between Coolant and Cooling Water

How to Reset the Maintenance Wrench Light on Honda Envix?

How to Determine the Quality of an Electric Vehicle Battery?

How many cylinders does the Cavalier engine have?

What does Toyota Camry Dual Hybrid mean?

How to open the fuel tank of the new Sagitar?

What is the Prado GXR?