What is the suitable tire pressure for cars in summer?

2 Answers
FelixRose
07/29/25 11:33am
In summer, the normal tire pressure for cars is generally suitable between 2.2-2.4 bar. As the temperature and road surface temperature rise, the tire pressure can easily increase during high-speed or long-distance driving. Excessive tire pressure can lead to loss of braking control and may cause tire bursts when encountering road protrusions or depressions. Hazards of excessive tire pressure: Reduced tire friction and adhesion, affecting braking performance; Causes steering wheel vibration and deviation, reducing driving comfort; Accelerates wear on the central tread pattern, shortening tire lifespan; Increases vehicle vibration, indirectly affecting the lifespan of other components; Overstretches the tire cords, reducing tire elasticity and increasing the load on the car during driving; Decreases puncture resistance. When encountering sharp objects like nails or glass on the road, the tire is more prone to punctures, leading to internal cracks, bursts, and blowouts.
Was this review help?
11
4
Share
JuliannaRose
08/13/25 7:31pm
I remember paying special attention to tire pressure in summer while driving, as high temperatures can easily cause issues. Generally, the recommended values in the owner's manual or on the door frame are the most reliable, usually between 30 to 35 PSI. In summer, as temperatures rise, the air expands, causing tire pressure to be 2-4 PSI higher than when the car is cold. I recommend measuring it in the early morning when temperatures are lower, maintaining the recommended value but possibly keeping it slightly lower by 1-2 PSI to avoid the risk of a blowout. Never arbitrarily increase the pressure, as this can lead to faster wear in the center of the tire and make the car harder to control while driving. I regularly check with a tire pressure gauge to ensure the front and rear tires are consistent, which enhances both safety and fuel efficiency. Experience has taught me that improper tire pressure can lead to accidents, big or small, so I always handle it with care—better safe than sorry.
Was this review help?
13
4
Share
Expand All
More Forum Discussions

Why are all the warning lights on and the car won't start?

Possible reasons for all warning lights being on and the car not starting include: insufficient fuel pressure; incorrect throttle position sensor signal; malfunctioning fuel pump; faulty spark plugs. Below is an extended explanation: Other reasons: Apart from improper operation by the driver, if all dashboard warning lights are on and the car won't start, it could also be due to starter motor failure, fuel pump supply issues, injector problems, or sensor malfunctions. These more complex situations require professional handling. Precautions: Fuel quality issues. Upon inspection, water and mud were found in the fuel tank. Using such contaminated fuel will inevitably damage the car. Therefore, it is advised that owners must refuel at reputable gas stations. When traveling, a gauze can be placed over the fuel nozzle to filter out impurities. Lack of antifreeze. Some owners use water or low-quality antifreeze, resulting in the entire cooling system freezing in extremely cold winter conditions, leading to engine block cracks, inoperable water pumps, failure to start, and damage to other engine components.
6
4
Share

What are the brands of pickup trucks?

Pickup truck brands mainly include Great Wall, Jiangling, ZX Auto, Nissan, Qingling, Yangzi, Sunlight, SG Auto, Xinkai, Wanfeng, etc. Here is some relevant information: 1. Pickup truck annual inspection: The annual inspection items for pickup trucks vary depending on the classification of passenger vehicles, cargo vehicles, trailers, tricycles, motorcycles, etc. Pickup trucks fall under the category of small cargo vehicles, and their annual inspection includes 8 major categories with 50 detailed items: vehicle uniqueness inspection, online query, vehicle characteristic parameter inspection, vehicle appearance inspection, safety device inspection, chassis dynamic inspection, vehicle chassis component inspection, and instrument equipment inspection. 2. Required documents: For the annual inspection, the owner must bring the vehicle's "Driving License", "Insurance Certificate", and the owner's original ID card. For initial inspections (including new vehicles and transferred vehicles), the inspection is conducted based on the "Motor Vehicle Registration Business Acceptance Certificate"; for periodic inspections, the inspection is conducted based on the "Motor Vehicle Driving License", "Motor Vehicle Periodic Inspection Form" (which can be downloaded online), and the "Third-Party Liability Insurance Certificate (Policy)".
20
0
Share

What does car scratch insurance mean?

Car scratch insurance is an additional coverage to vehicle damage insurance, meaning it can be purchased only if the motor vehicle damage insurance is already in place. The full name of scratch insurance is 'Vehicle Scratch Loss Insurance', available for family-owned and non-commercial vehicles. It covers the cost of repainting the vehicle's surface when there are scratches without obvious collision marks during the insurance period, with the insurance company compensating for the actual loss. Scratch insurance is an add-on to vehicle damage insurance and cannot be purchased separately; it requires the main vehicle damage insurance policy to be active. Below is relevant information: Introduction: Scratch insurance, also known as vehicle scratch insurance, is one of the additional coverages, mainly serving as a supplement to vehicle damage insurance, providing effective protection against accidental scratches on the vehicle body. Vehicle Scratch Insurance Clauses: Clause 1 - Scope of Coverage: This insurance is an additional coverage to vehicle damage insurance and can only be purchased if the vehicle is already covered under vehicle damage insurance. Clause 2 - Insurance Liability: During the insurance period, if the insured vehicle suffers from isolated scratches on the painted surface without obvious collision marks, the insurer shall compensate for the actual loss according to the terms of this contract.
15
2
Share

What are the reasons why a Buick car won't start?

There are various reasons why a car won't start, such as: dead battery, damaged ignition coil, faulty ignition solenoid valve, broken ignition switch, problematic buffer plate, engine failure, etc. It's best to have it checked at a 4S shop or repair shop for specific diagnosis. Below is specific information about Buick: 1. Overview: Buick is an automobile brand marketed by General Motors in the United States, Canada, and China. It is sold in North America, China, CIS countries, and the Middle East. 2. Main models: Buick includes many well-known models such as Buick Excelle, Buick Verano, Buick Envision, Buick Enclave, Buick Regal, Buick LaCrosse, Buick Encore, Buick Encore GX, Buick Envision S, Buick Envision Plus, Buick Enclave, Buick GL6, Buick GL8 Land Business Class, GL8 ES Land Elite, Velite 6, Velite 7, and the high-end sub-brand Avenir. Buick holds a significant position in American automotive history. As a major pillar of General Motors, it drives the advancement of the entire automotive industry and serves as a model for other car companies to follow.
19
3
Share

Why does black car paint appear dull and lose its shine?

Black car paint appearing dull and losing its shine may be caused by the following reasons: 1. Paint oxidation: Under the exposure to the sun's ultraviolet rays, the paint film continuously evaporates oils into the air to protect itself. Over time, excessive loss of oils from the paint surface can occur, significantly reducing the brightness and depth of the paint, causing it to slowly turn white. Severe oxidation can be treated through grinding and polishing. 2. Traffic 'film': While driving, friction generates a strong electrostatic layer on the car. Static electricity has a strong ability to attract dust, oil stains, and chemical particles, forming a hard traffic film over time. This can easily lead to oxidation and corrosion of the paint surface, which can be addressed with grinding and polishing. 3. Fading: Oil smoke and pollutants in the atmosphere are the main causes of paint fading and discoloration. Fading differs from oxidation; when fading occurs, uneven color differences appear on the paint. Moderate to mild fading can be treated with grinding and polishing, while severe cases require repainting. 4. Etching: Etching refers to surface abrasion. Insects, bird droppings, tree sap, tar, and asphalt can all cause etching. Only very slight etching can be resolved with grinding and polishing.
15
4
Share

What Causes Air Leakage from the Valve Core After Inflating a Tire?

Tire valve leakage may be caused by aging of the valve stem, which is mainly manifested as surface cracking, deformation, or hardening. If aging occurs, the valve stem should be replaced promptly. It could also be due to poor sealing between the valve stem and the wheel hub, leading to air leakage. Depending on the situation, the valve stem or wheel hub may need to be replaced. Another possibility is damage to the valve core, which may require replacement of the valve core or the entire valve stem assembly. More relevant information is as follows: 1. Valve Core: The valve core is installed inside the main body of the valve stem and functions as a one-way valve to prevent air leakage from the inner tube and to check and adjust the air pressure. To prevent clogging and air leakage in the main body's inner hole, a valve cap is used to seal the valve stem's inner hole. The valve cap can also serve as a tool for installing and removing the valve core. 2. Valve Stem: The rubber of the valve stem may age after prolonged use, leading to air leakage. Driving with insufficient air pressure can cause damage to the tire. Therefore, the valve stem should be inspected regularly.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.