···
Log in / Register

What is the suitable tire pressure for a Baojun 730 carrying 7 passengers?

4 Answers
DeKyle
09/03/25 7:10am

The official recommended tire pressure for the Baojun 730 is approximately 2.3-2.5 bar, and it is more appropriate to adjust the tire pressure to 2.5 bar when carrying 7 passengers. According to the provisions and requirements of the international GBT2978-2008 standard, different tire pressures are divided into standard tires at 2.4-2.5 bar; reinforced tires at 2.8-2.9 bar; the maximum air pressure should not exceed 3.5 bar. In winter, the tire pressure should be based on the standard tire pressure of the car, with an appropriate increase of about 0.2 bar. In summer, the tire pressure can generally be set at the lower limit of the standard tire pressure. For example, the lower limit for standard tires is 2.4 bar. If the car is often parked outdoors, the tire pressure can generally be about 0.1 bar lower than the standard to avoid tire blowouts due to high temperatures. The hazards of excessive tire pressure include reduced tire friction and adhesion, affecting braking performance; causing steering wheel vibration and deviation, reducing driving comfort; accelerating the wear of the central tread pattern, shortening the tire's lifespan, etc. The hazards of insufficient tire pressure include an increased friction coefficient between the car and the road surface, leading to higher fuel consumption; causing the steering wheel to feel heavy and prone to deviation, which are factors detrimental to driving safety; increasing the movement of various parts of the tire, leading to excessive rolling and abnormal heating of the tire, etc.

Was this review help?
16
4
Share
SkylarMarie
09/15/25 8:30am

I've been driving the Baojun 730 for several years, often carrying a full load of 7 people on long trips, so tire pressure is quite important. The standard tire pressure is usually indicated on the small label on the door frame or in the user manual, typically around 2.4 bar for the front tires and 2.4 bar for the rear tires. When fully loaded, I slightly adjust it to 2.5 bar measured when cold to avoid excessive tire flattening or rapid sidewall wear. Remember to use a tire pressure gauge for checking, and don't do it when the tires are hot, as the readings won't be accurate. By the way, incorrect tire pressure not only increases fuel consumption but also affects braking and cornering safety. I recommend checking it yourself every two weeks—it's low-cost but can prevent major issues. Safety comes first, ensuring peace of mind for family trips.

Was this review help?
13
5
Share
Expand All
MacMaggie
10/30/25 2:21am

As a family car owner, I often take my Baojun 730 out with 7 people. The tire pressure should follow the recommended values in the manual, usually around 2.4 bar consistently. When fully loaded, there's no need to add too much pressure—keeping it as is can sufficiently support the weight. The key is to pay attention to changes in tire pressure. If it's too high, the ride becomes bumpy and uncomfortable; if it's too low, it increases the risk of a flat tire or higher fuel consumption. I make it a habit to get a free check at the repair shop at the beginning of each month. In fact, maintaining the correct tire pressure can extend the tire's lifespan, saving both money and hassle. Don't overlook these small details—it ensures the kids sit securely in the back.

Was this review help?
14
3
Share
Expand All
CollinLee
12/13/25 2:29am

Young car owners often ask how to adjust the tire pressure for this car. I drive a Baojun 730 with 7 people for daily commuting. Just check the user manual or the door frame, the standard is 2.4 bar. No need to adjust when fully loaded, the original value is fine. Remember to use a simple tire pressure gauge when the tires are cold to ensure they're within the recommended range. Proper tire pressure ensures smooth handling and reduces annoying tire noise. Regular checks can prevent accidents—simple yet practical.

Was this review help?
6
2
Share
Expand All
More Forum Discussions

What is the minimum ground clearance of the X-Trail?

The minimum ground clearance of the X-Trail is 210mm. The front suspension of the X-Trail is a MacPherson strut independent suspension with a stabilizer bar, while the rear suspension features a stabilizer bar and a multi-link independent suspension. Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the vehicle is fully loaded and stationary. It is used to indicate the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The X-Trail is a compact SUV launched by Dongfeng Nissan, with dimensions of 4675mm in length, 1820mm in width, and 1722mm in height, and a wheelbase of 2706mm. It is equipped with two naturally aspirated engines, a 2.0L and a 2.5L, paired with a CVT (simulating 7 gears) transmission.
16
2
Share

Which Gear is for Forward Movement in an Automatic Transmission?

In an automatic transmission, the D gear is the forward gear. More details are as follows: 1. When shifting to D (Drive) or R (Reverse), you must press the brake pedal; otherwise, the gear won't engage. 2. After the gear is engaged, release the brake, and the vehicle will start moving forward (or backward), then you can accelerate. 3. To stop, simply press the brake pedal, and the vehicle will come to a halt. Below is a brief introduction to automatic transmission gears: 1. An automatic transmission, as the name suggests, does not require the driver to manually shift gears. The vehicle automatically selects the appropriate gear based on speed and traffic conditions. Typically, an automatic transmission has six gear positions, arranged from top to bottom as: P, R, N, D, S, L. 2. On the gear lever, P stands for Park, R for Reverse, N for Neutral, and D for Drive. For a manual-automatic transmission, '+' increases a gear, and '-' decreases a gear. For uphill or downhill driving, the D gear is sufficient, and you can control the speed using the brake and accelerator. When waiting at a traffic light or stopping briefly, keep the gear in D and press the brake.
9
3
Share

How to Replace a Car Remote Control Battery?

Replacing a car remote control battery can be done as follows: 1. If the key is foldable, after popping out the mechanical key, you can see the buckle at the folding position. Use a tool to press the buckle, and you can remove the shell. 2. If it's a hidden mechanical key, after opening the key shell, remove the old button battery and check if the model of the new battery matches the old one. Then replace it with a new button battery of the correct specification, paying attention to the installation position to avoid reversing it. Here is some related information about the functions of car keys: 1. Automatic unlocking: The chip in the smart card carried by the owner automatically locks and unlocks the door. When the owner approaches the car, the key and the car begin to exchange preset command information via radio waves. Subsequently, the car's locking system, security system, and engine control system are all activated. 2. Smart ignition: The driver needs to insert the key into the car's ignition keyhole to start the engine. The keyless start feature of smart keys makes this process more convenient. 3. Owner identification: Each smart key has a unique ID code that corresponds to the vehicle's ID code. Even if the key is simply duplicated, the vehicle cannot be started without the ID code.
3
4
Share

What are the basic adjustment channel numbers in the Volkswagen system?

Volkswagen system basic adjustment channels include channel numbers 03, 04, 05, 06, 07, and 08. Channel 03: Automatically locks doors when vehicle speed reaches 20km/h. Channel 04: Automatically unlocks when the key is removed. Channel 05: Sounds the warning horn twice when unlocking with remote. Channel 06: Sounds the warning horn once when unlocking with remote. Channel 07: Flashes all turn signals twice simultaneously when unlocking with remote. Channel 08: Flashes all turn signals once simultaneously when locking with remote.
5
0
Share

Why is the Mercedes-Benz engine oil level system temporarily unable to measure?

Mercedes-Benz engine oil level system temporarily unable to measure the reasons are as follows: Oil sensor damage: The car's oil pressure sensor is an important device to detect the oil pressure of the vehicle engine, the detected data can help control the normal operation of the engine. If damaged, the engine oil level system cannot be measured. Engine control unit failure The engine control unit can keep the engine in the best working condition, the performance of the engine (power, economy, emissions) to achieve the best. If faulty, it will also cause the oil level system to be unable to measure.
14
1
Share

How Often Should a Lavida Car Be Maintained?

Maintenance intervals for the Volkswagen Lavida are determined by the type of engine oil used, with different oils requiring different change cycles. Here are the specifics: 1. Mineral oil should be changed every 5,000 kilometers or 3 months. 2. Semi-synthetic oil should be changed every 7,500 kilometers or 6 months. 3. Fully synthetic oil should be changed every 10,000 kilometers or 1 year. 4. The actual interval may vary depending on the driving conditions of the vehicle. Regular maintenance and upkeep of the vehicle are essential for driving safety, and maintaining good vehicle condition is a guarantee of safe driving. Regular maintenance is necessary to achieve the best performance from the car.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.