What is the Suitable Engine Oil for Summer?

Does a squeaking sound when braking mean the brake pads need to be replaced?

Vehicle brake disc and pad replacement limits are: brake discs must be replaced when single-side wear reaches 3MM, and brake pads must be replaced when remaining thickness is 3MM. The following are reasons for squeaking sounds during braking: 1. Rust on brake discs or pads: After prolonged parking, especially in humid climates or after rain, some rust or dirt may form on brake discs or pads. This usually resolves after driving for a while, or you can apply butter or specialized lubricant at the connection between brake pads and calipers. 2. New brake pads: New vehicles or recently replaced brake pads may produce similar sounds. New brake pads and discs require a break-in period, and such noises during braking are completely normal. However, if the sound persists after extended use, there may be an issue. 3. Excessive wear on brake discs or pads: Both components are high-wear items that experience friction during every brake application. Long-term use naturally causes wear, and excessive wear will produce abnormal sounds, necessitating regular inspection and replacement. Typically, brake pads should be replaced every 60,000-80,000 kilometers, while brake discs should be replaced every 100,000-120,000 kilometers.

6

4

Share

Why does the booster pump keep running when not in use?

The following are the reasons why the booster pump keeps running when not in use: 1. Water leakage in the pipe connected to the booster pump: Due to the decrease in water pressure in the pump chamber, the pump restarts to replenish the pressure. Because the water output is very small, the pressure quickly rises to the set value, causing the booster pump to stop maintaining pressure. When the pressure is reached, the water pressure will drop due to leakage, and the booster pump will replenish the pressure again. 2. The check valve of the booster pump is of poor quality: Since there is no water in the outlet direction of the pump, the pressure is quickly replenished, and the booster pump immediately enters a dormant standby state. The reciprocating cycle causes this obvious shutdown phenomenon. The solution is to replace the one-way check valve with one that meets quality standards. 3. There is a problem with the control system of the booster pump: When the control system malfunctions, the water pump will not work, and the pressure disappears once the pump stops.

20

2

Share

How to check if ETC has been processed?

Bring your ID card, vehicle license and other documents to the ETC service outlet and consult the staff to check whether your vehicle has ETC. Here is some relevant information about ETC: 1. The full name of ETC is Electronic-Toll-Collection, which translates to electronic non-stop toll collection system in Chinese. The biggest advantage of this system is that it works 24 hours non-stop. 2. ETC is generally installed in the middle of the front windshield of the car, directly behind the rearview mirror. This ensures accurate ETC identification while not obstructing the driver's view. 3. The on-board electronic tag installed on the windshield communicates with the microwave antenna of the toll station. When passing through the toll station, the system settles accounts with the bank through computer interconnection technology, thus achieving non-stop toll collection.

9

0

Share

How to Replace the Battery in a Mercedes-Benz SL280 Key?

The back of the key has a button. Press and hold this button, then push the back cover of the key forward to open it. The battery is located in the slot nearby and can be replaced directly. During the replacement process, it is crucial to pay attention to the battery model. Most Mercedes-Benz key batteries are of the 3V-CR2025 type. After removing the old battery from the slot, replace it with a new one. Next, reattach the back cover of the key. Once installed, the battery replacement is complete. More details are as follows: 1. The lifespan of a Mercedes-Benz key battery is generally two years, while the original factory battery can last up to six years. 2. When the key battery is low, the Mercedes-Benz vehicle will provide two types of alerts: one is when pressing the ignition switch, the dashboard will display a message to replace the key battery. 3. The second alert is when pressing the lock or unlock button on the key. If the indicator light on the key becomes dim or does not light up, it is time to replace the key battery.

4

0

Share

How Many Days in Advance Can You Apply for a Driver's License Renewal?

You can apply for a driver's license renewal up to 90 days in advance. According to relevant regulations, drivers must apply for a license renewal within 90 days before the expiration of their current driver's license. Before renewing the license, any traffic violations associated with the driver's license must be resolved. Driving with an expired license is considered driving without a valid license. Regulations for driver's license renewal: If the license has expired for less than one year, you should promptly visit the vehicle management office to renew it. If the license has expired for one to three years, you must apply for a written test (Subject 1) at the vehicle management office and pass the exam to obtain a new license. If the license has expired for more than three years, it will be revoked, and you will need to retake the entire driving test. Required documents include the original ID card, the current driver's license, and three one-inch white-background photos. Locations for driver's license renewal: You can renew your driver's license at the vehicle management office, through the mobile app "Traffic Management 12123," or at police-post convenience service stations. Requirements for applying for a delayed renewal: If a driver is unable to renew the license within the specified time due to reasons such as military service or being abroad, they can apply for a delayed renewal at the vehicle management office where the license was originally issued, within the inspection validity period of the license. The maximum delay period is three years. Note that during the delay period, the driver is not allowed to operate a motor vehicle.

2

3

Share

What is the question type ratio for Subject 1?

There is no fixed question type ratio for the driver's license Subject 1 exam; questions appear randomly, with a total of 100 questions, each worth 1 point. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," each question is worth 1 point, totaling 100 points. If 11 questions are answered incorrectly during the exam, the system will automatically submit the test and end the exam. Subject 1, also known as the theoretical exam or driver theory test, is part of the motor vehicle driver's license assessment. The exam content includes driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The exam is computer-based and has a time limit of 45 minutes. Subject 1 exam content: Driver's license and motor vehicle management regulations; road traffic conditions and rules; road traffic safety violations and penalties; road traffic accident handling regulations; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 exam precautions: Candidates should dress appropriately for the exam—no slippers are allowed. Electronic devices and bags are prohibited in the exam room. Bring your ID card and queue to enter the waiting hall. Observe the instructions and procedures on the large screen before entering the exam room, and store personal belongings in a locker. Upon entering the exam room, candidates will be assigned a seat at the identity verification station. Once seated, begin the exam, ensuring the camera is aligned with you and adhering to exam discipline. If you fail the first attempt, a retake is available on the same day. If you fail again, you must pay to reschedule. After the exam, queue to collect your score report and sign it—failure to sign renders the result invalid. There is no limit to the number of times you can reschedule the Subject 1 exam. Each subject can be taken once, with one retake allowed if you fail. If you do not take the retake or fail it, the exam process ends, and you must reschedule. In contrast, Subjects 2 and 3 have only five exam attempts. Subjects 2 and 3 can be rescheduled after ten days. If you fail the Subject 3 safe and civilized driving knowledge test, your passing score for the road driving skills test remains valid. There are three subjects in the driver's license exam: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge exam. Subject 2 refers to the field driving skills test. Subject 3 is divided into two parts: road driving skills and safe and civilized driving knowledge. The safe and civilized driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official terminology (as per the Ministry of Public Security's Order No. 123) does not include the term "Subject 4."

17

3

Share

What is the Suitable Engine Oil for Summer?

Does a squeaking sound when braking mean the brake pads need to be replaced?

Why does the booster pump keep running when not in use?

How to check if ETC has been processed?

How to Replace the Battery in a Mercedes-Benz SL280 Key?

How Many Days in Advance Can You Apply for a Driver's License Renewal?

What is the question type ratio for Subject 1?

Is it okay to park next to an outdoor air conditioning unit?

What are the regulations for the uphill stopping point in Subject 2?

What is the fuel consumption of the Lincoln Navigator?

What does 8AT mean in cars?