What is the Subject 3 Civilized Safety Knowledge Test?

Where is the drain screw for the Audi Q5 radiator?

The drain screw for the Audi Q5 radiator is located on the lower hose of the radiator. Specific location: The radiator is located at the front of the engine. When opened, you can see the electric fan. Behind the electric fan is the radiator, and the drain screw is on the lower hose of the radiator. Method for adding water to the radiator: Open the radiator cap or expansion tank cap (the filling location varies by model). Start the car. If there is no water in the radiator at all, you can first add some water, then start the car, and slowly add more water until it overflows. Then tighten the cap. You can also gently press the accelerator to raise the water temperature. Wait until the cooling fan operates. When the fan stops, use a wet towel to cover the cap and slowly open it to check if the water level has reached the standard mark. If not, add more water until it reaches the correct level.

15

4

Share

What year was the purely imported Corolla produced?

Corolla purely imported was produced in 2016. Differences between domestic and imported models: The domestic Corolla is equipped with two types of transmissions: a 6-speed manual and a 4-speed automatic. In contrast, the Japanese-produced Corolla comes with a Super CVT-i transmission, which can simulate a 7-speed manual mode. This continuously variable transmission provides smooth acceleration and fuel-efficient performance, representing a hallmark transmission for Toyota vehicles. Corolla: The Corolla is a compact car under FAW Toyota. It measures 4635 mm in length, 1780 mm in width, and 1455 mm in height, with a wheelbase of 2700 mm. The body type is a 4-door, 5-seater sedan, and it features a CVT transmission (simulating 10 gears). The Corolla is equipped with a brake force distribution system, brake assist system, vehicle stability control system, lane departure warning system, lane keeping assist system, and active safety system.

8

0

Share

Where is the fuse location for the Mercedes brake pad warning line?

Mercedes brake pad warning line fuses are located in two places: one is in the fuse box of the Mercedes GLA, which is on the front floor of the passenger side. Lift the floor mat to see the fuse box. The other is located in the engine compartment. Definition of automobile brake pads: Automobile brake pads, also known as automobile brake linings, refer to the friction materials fixed on the brake drum or brake disc that rotates with the wheel. The friction lining and friction block bear external pressure and generate friction to achieve vehicle deceleration. Structure of automobile brake pads: The heat insulation layer is composed of non-heat-conducting materials, aiming to insulate heat. The friction block consists of friction materials and adhesives. When braking, it is squeezed against the brake disc or brake drum to generate friction, thereby achieving vehicle deceleration and braking. Due to friction, the friction block will gradually wear out. Generally, the lower the cost of the brake pads, the faster they wear. When the friction materials are used up, the brake pads should be replaced in time. Otherwise, the steel plate will directly contact the brake disc, eventually losing the braking effect and damaging the brake disc.

20

4

Share

What is the actual fuel consumption of the Kamiq?

The comprehensive fuel consumption of the Kamiq is 5.8-6.0L/100km. Currently, there are 8 models of the Kamiq available for sale: the Automatic Standard Edition, Manual Comfort Edition, Automatic Comfort Edition, Automatic Flagship Edition, Automatic Comfort Edition, Manual Standard Edition, with a comprehensive fuel consumption of 6.0L/100km. The DSG Flagship Edition and DSG Comfort Edition have a comprehensive fuel consumption of 5.8L/100km. The above figures are the NEDC comprehensive fuel consumption, which is the fuel consumption data measured under the NEDC test procedure. The actual fuel consumption is higher than this value, around 7.8L. Methods to reduce fuel consumption: Clean engine carbon deposits: Excessive engine carbon deposits are a significant cause, mainly due to the use of unsuitable fuel. It is recommended to add a certain amount of cleaning agent when refueling. If the effect is not obvious, it indicates a large amount of carbon deposits in the engine. In this case, the car must be taken to a 4S shop for professional technicians to clean the carbon deposits in the engine. Check the oxygen sensor: As an internal control unit of the car, the oxygen sensor mainly monitors the fuel-air ratio of the engine. Once it is damaged, it will cause an imbalance in the fuel-air ratio, leading to a sudden increase in fuel consumption. After the oxygen sensor is damaged, the exhaust pipe will emit darker-colored exhaust gas during driving, and the oxygen sensor should be replaced at this time. Regularly replace the three filters: During the use of the vehicle, the oil filter, air filter, and fuel filter must be replaced regularly. If they are not replaced for a long time, they become dirty and send incorrect information to the engine control unit, resulting in incomplete fuel combustion and increased engine carbon deposits. Check the electronic control unit: Although the engine's electronic control unit is highly reliable, in vehicles that have been used for a long time, various faults may inevitably occur.

8

2

Share

Where is the handbrake of Yueda Kia automatic transmission?

The handbrake of the automatic transmission Kia is located at the lower left corner of the driver's seat and is a foot-operated handbrake. After parking, step on the foot brake: You can observe the dashboard area, where a red exclamation mark will appear, indicating that the "handbrake" has been engaged. Similarly, when starting the vehicle, step on it again to release the "handbrake", and the "handbrake" indicator light will turn off. Advantages of foot-operated handbrake: The benefit of this handbrake is that it is convenient and technologically advanced, with no distinction in braking force, preventing "false braking" and "half braking". The biggest drawback is that it may feel unfamiliar for first-time users and is easy to forget to release the brake. Before starting the vehicle: Develop the habit of checking whether the "handbrake" indicator light is off.

4

1

Share

What are the best tires to replace for Haval H9?

When replacing tires for Haval H9, you can choose original equipment manufacturer (OEM) tires or high-quality tires from brands such as Pirelli, Goodyear, Continental, and Michelin. Below is some information about tire replacement: 1. Car tires should be replaced every 3 to 5 years or 40,000 to 60,000 kilometers: After 2 to 3 years of use, small cracks may gradually appear on the sidewalls of the tires. If these are noticed, the tires should be replaced promptly. 2. If the tires have not reached the wear limit or mileage: Tires should also be replaced when they have been in use for 5 years or when a large number of cracks appear on the sidewalls. As long as the tire sidewalls have not been impacted and the cords are not broken, they can continue to be used. 3. Tires need to be replaced when the actual wear limit is less than 1.6 millimeters: The triangular marks on the tire sidewalls can help the owner locate a protrusion in the tread grooves to determine the actual wear limit of the tire. This value should be greater than 1.6 millimeters. If it is less than 1.6 millimeters, the tires need to be replaced.

6

2

Share

What is the Subject 3 Civilized Safety Knowledge Test?

Where is the drain screw for the Audi Q5 radiator?

What year was the purely imported Corolla produced?

Where is the fuse location for the Mercedes brake pad warning line?

What is the actual fuel consumption of the Kamiq?

Where is the handbrake of Yueda Kia automatic transmission?

What are the best tires to replace for Haval H9?

What is the wading depth of the BMW X1?

Why does the Audi A4 malfunction?

Why Does BMW Frequently Display Fault Codes?

How to Fold the Rearview Mirrors of the Lavida Car?