What is the straight-ahead signal traffic police hand gesture?

2 Answers
OMackenzie
09/06/25 4:17am
The straight-ahead signal traffic police hand gesture is when the left arm extends horizontally to the left at a 90-degree angle to the body, palm facing forward, fingers closed together, with the face and gaze simultaneously turning 45 degrees to the left; or the right arm extends horizontally to the right at a 90-degree angle to the body, palm facing forward, fingers closed together, with the face and gaze simultaneously turning 45 degrees to the right. Drivers need to pay attention to traffic police hand gestures while operating a vehicle. Below is detailed information about vehicle driving: Overview: Driving a vehicle is one of the essential skills modern individuals should master. To acquire vehicle driving (driving-a-motor-vehicle) skills, one must meet the required age and physical conditions, and complete training and examinations on road traffic safety laws and regulations, basic automotive mechanical knowledge, and safe driving practices. Other: The permission to drive a vehicle is granted through the issuance of a driver's license. This indicates that obtaining a driver's license is a formal procedure that must be issued by an authorized agency.
Was this review help?
2
0
Share
CarolineFitz
09/18/25 4:12am
When driving in the city, I often see traffic police directing traffic. That straight-through gesture is actually quite obvious—the officer extends their right arm straight forward with the palm facing forward, indicating that you can proceed. Once, I was driving through a particularly congested intersection where the traffic lights were out, and it was entirely up to the traffic police using this gesture to keep vehicles moving efficiently. New drivers might panic and stop or make erratic turns if they don't understand this signal, but once familiar, you'll find it provides clear guidance at chaotic intersections, reducing congestion. I remember one windy day when the traffic signals were unstable, yet the officers still used hand signals to maintain order and ensure safety.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

What causes the brake light to illuminate?

The reasons for the brake light to illuminate are as follows: 1. The handbrake system of the motor vehicle is not fully released; 2. There is a shortage of brake fluid inside the vehicle's engine; 3. Leakage in the vehicle's master brake cylinder or brake fluid pipes; 4. There is air leakage in the vehicle's brake system; 5. Issues with the vehicle's brake pads or brake calipers in the brake system. Solution: It is necessary to safely pull the vehicle over to the side of the road at a safe speed, then set up a safety warning sign behind the vehicle, inspect the vehicle to identify the specific cause of the fault, and address it accordingly. Once resolved, the vehicle can be driven normally. Until the fault is eliminated, the vehicle must not continue to move forward, as this would increase the risk to the vehicle.
20
2
Share

How to use the cruise control on the 2017 Sagitar?

17 Sagitar cruise control usage is as follows: 1. The SET button is used to set the current speed. 2. RES is used to recall the memorized speed, and then adjust the speed with the +/- buttons, with each press increasing or decreasing the speed by 1 km/h. Precautions for using cruise control on the Volkswagen Sagitar: 1. Cruise control does not have automatic braking function, while adaptive cruise control is more intelligent. 2. Simply pressing the brake will deactivate the cruise control. The speed setting will not be cleared and can be resumed later. 3. It may be dangerous to use cruise control in complex road conditions or under adverse weather conditions. 4. On downhill slopes, the vehicle may accelerate. In such cases, you should brake to control the speed to prevent accidents caused by loss of control.
4
5
Share

What are the differences between the VV5 and VV6?

The differences between the VV5 and VV6 lie in their body dimensions: the VV5 measures 4462mm in length, 1857mm in width, and 1638mm in height, with a wheelbase of 2680mm; the VV6 measures 4625mm in length, 1860mm in width, and 1720mm in height, also with a wheelbase of 2680mm. In terms of power, the VV6 is equipped with a 2.0T turbocharged engine, delivering a maximum output of 197 horsepower and a peak torque of 355 Nm, paired with a 7-speed wet dual-clutch transmission. For the interior, the VV6 continues the consistent style of the WEY family, but opts for a beige and black two-tone color scheme, and the steering wheel abandons the more sporty flat-bottom design.
10
4
Share

Does the Dongfeng Fengshen AX7 have LED daytime running lights?

Dongfeng Fengshen AX7 is equipped with LED daytime running lights. The main function of daytime running lights is to alert oncoming vehicles, making the car more visible during daytime driving. They serve as a type of signal light. Below are the manual operation steps to turn off the daytime running lights: 1. Insert the ignition key with the ignition switch in the off position, move the turn signal switch to the left turn position, pull up the high beam and hold it, then turn on the ignition switch. 2. Hold for 5 seconds until you hear a prompt sound, then release the ignition switch and return it to the original position. The daytime running lights will be turned off. Conversely, to turn them on, the procedure is similar to turning them off, just change the left turn signal to the right turn signal.
1
2
Share

Under What Circumstances Should Paint Be Applied?

Paint application is necessary under the following circumstances: 1. When the paint surface is severely aged and cannot be restored through polishing techniques; 2. When the paint surface is heavily eroded by lens effect and loses significant gloss; 3. When the paint surface has a thick oxidation layer with localized corrosion that cannot be polished away; 4. When the paint surface has deep scratches that cannot be removed by polishing; 5. When the paint surface has localized or extensive damage. Loss of adhesion may occur between the topcoat and primer, between the topcoat and old paint layers, or between the primer and metal surface. During the painting process, the feathering repair method should be employed. This involves applying the second coat of primer over a slightly larger area than the first, followed by adding approximately five times the amount of thinner for edge feathering during application.
19
3
Share

What model of tires does the Kia Forte use?

The Kia Forte 1.6L GL model uses tires with the specification 195/65R15; the 2.0L TOP model uses tires with the specification 205/55R16. Below is related information about the Forte: 1. Taking the 2019 Forte as an example, its body dimensions are 4510mm in length, 1750mm in width, and 1470mm in height, with a wheelbase of 2650mm, a minimum ground clearance of 150mm, a fuel tank capacity of 50 liters, and the body structure is a 4-door, 5-seater sedan. 2. The 2019 Forte is equipped with a 1.6L naturally aspirated engine with a maximum power of 90.2 kW and a maximum torque of 150.7 Nm, paired with a 6-speed manual transmission.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.