What is the starting method for an automatic transmission car?

[StLeo]

Automatic transmission car starting method is as follows: 1. First, turn the ignition key to the second position, the power gear, to allow the car's computer system to begin self-checking for at least 6 seconds or more. 2. Press the foot brake, shift the gear from P to N (if reversing, start the engine directly in P gear), then release the foot brake and turn the ignition key to the ignition position to start the engine. 3. After starting the engine, press the foot brake, release the handbrake, and shift the gear from N to D; if starting on a slope, to prevent rolling backward, you can first shift the gear from N to D. 4. Slowly release the foot brake to start moving. 5. Then, according to road conditions, steadily press the accelerator to increase speed and drive safely.

[StPhoebe]

When I first started learning to drive an automatic transmission car, I found the starting process quite simple: The first step is to sit in the driver's seat, adjust the rearview mirror and seat for comfort, then fasten the seat belt—this is a crucial step. Press down on the brake pedal while confirming the gear is in the P (Park) position, which is designed to prevent the car from rolling. Next, insert the car key and turn it all the way until the engine starts; if you hear clicking sounds, the battery might be dead. After starting, don’t rush to press the accelerator—wait for the dashboard lights to fully illuminate and check for any warning indicators before shifting to D (Drive) and setting off. In cold winter starts, it’s good to warm up the engine for a minute or two to ensure proper lubrication. The most important part of the whole process is pressing the brake pedal, which beginners often forget, leading to failed starts and funny situations. It’s best to practice a few times in an open space to get familiar with it—safety first!

[CeciliaMarie]

After driving automatic transmission cars for over a decade, I've learned that starting must follow proper procedures: Sit firmly and press the brake pedal hard, gear must be in P position – otherwise it simply won't start. Some people try to save time by attempting to start in N gear, only to damage the starter motor and waste money on repairs. Don't turn the key too forcefully or hold it too long when starting; release immediately after the engine fires up. Regularly check battery health – if you encounter issues like no sound during startup, it might indicate battery aging, in which case you can either jump-start with a friend's help or replace it. After starting, gently press the accelerator to test responsiveness, don't stomp on it like a novice wasting fuel. The key is developing good habits: Check dashboard before starting, listen for smooth engine sounds after ignition, and immediately shut down and investigate if anything seems abnormal – this prevents roadside breakdown troubles!

[DiJude]

As someone who often reminds friends about driving safety, I emphasize the crucial details when starting the car: Pressing the brake pedal isn't just a procedure—it prevents the vehicle from rolling and hitting objects. Before starting, sit properly and observe the surroundings to ensure no people or vehicles are nearby. Keep your hands on the steering wheel while turning the key to start, allowing quick reaction in case of abnormalities. The P (Park) position is mandatory—it locks the transmission to prevent unintended movement. After starting, fasten your seatbelt and promptly check if the lights are functioning, such as the headlights being on. Stay calm throughout the process; don't rush. If the key turns but the engine doesn't start, it might be due to an active anti-theft system—patiently retry. Safe driving begins with a proper start—avoid haste-induced mistakes that could lead to accidents!