What is the standard tire pressure for the Pajero?

What are the acceptance standards for engine overhaul completion?

Automobile engine overhaul completion acceptance standards: 1. Good power performance, stable idle operation, reasonable fuel consumption, normal lubrication of components, and proper functioning of accessories. 2. No water leakage, oil leakage, air leakage, or electrical leakage is allowed. 3. The engine should be able to start within 5 seconds at normal temperature, with stable operation at low, medium, and high speeds. Water temperature should not exceed 90 degrees Celsius, with good acceleration performance. 4. There should be no misfiring, carburetor backfiring, or exhaust pipe popping. After stable engine operation, there should be no abnormal noises, but slight and uniform timing gear, engine oil pump transmission gear noise, and valve tappet sounds are allowed. 5. Cylinder pressure must meet specified limits. 6. Engine oil pressure must meet specified limits. 7. Engine emissions must comply with regulations, and minimum fuel consumption must meet specified limits. 8. Painting must be done according to specifications. 9. After passing inspection, the engine must be installed with a speed limiter.

7

5

Share

Can Tires Be Replaced One by One?

Tires can be replaced one by one. Here are some considerations for tire replacement: 1. Pay attention to the front and back sides of the tire: The so-called front and back sides of the tire specifically refer to which side needs to face outward. The tread pattern that appears the same on both sides actually has a direction. If installed incorrectly, it may cause uneven tire wear. When installing the tire, simply install the side with numbers facing the front of the hub. However, different manufacturers have different labeling methods. For example, some brand tires will mark "OUTSIDE" on the sidewall of the tire. After installing the tire, there is another essential step, which is to adjust the dynamic balance. 2. Pay attention to the distinction between new and old tires: The difference between new and old tires is obvious when placed together. The depth of the tread pattern and the color of the rubber are distinctly different. The small particles on the new tire and the hairs on the sidewall indicate that the tire has not been driven on, which is a sign of a brand-new tire.

6

2

Share

What are the criteria for classifying legal systems?

The classification criteria for legal systems are relative and comprehensive. Here are the specific details: 1. Reasons for classifying legal systems: Different standards can lead to different classifications, such as by historical type, by legal origin (form), by the relationship between religion and law (religious legal systems and secular legal systems), by region and tradition (Far Eastern legal systems and Western legal systems), etc. Under the same standard, different classifications can be made depending on the main departments being examined. 2. Factors influencing legal systems: There are many and complex factors that influence the formation of legal systems. While legal systems are constrained by the economic base, they are also influenced by non-economic factors, including other superstructural elements. The simplest and most notable characteristic is that civil law systems are primarily based on statutory law, meaning that there is no crime without a written law, and court rulings are made according to written legal provisions. On the other hand, common law systems are primarily based on case law, meaning that when adjudicating a case, reference is made to previous court rulings on identical or similar cases, and the current case is adjudicated based on such precedents.

3

1

Share

Does the GAC Trumpchi GM6 have a 6-seater version?

The Trumpchi GM6 offers both 6-seater and 7-seater versions. Here are the relevant details: 1. It is powered by a 1.5T engine. 2. The GM6 adopts the 'Light and Shadow Sculpture 3.0' design concept, featuring a bold yet refined overall appearance. Among medium-sized 6/7-seater MPVs, the GM6 boasts body dimensions of 4780*1837*1730mm, significantly surpassing its peers, undoubtedly providing passengers with more spacious seating and usage areas, even in the third row where there's no need to sit cramped. 3. For the interior, the generous seating, soft color schemes, and smooth, flowing lines on the dashboard create a warm and elegant cabin atmosphere. Compared to its boxy exterior, the interior leans more towards a cozy, homey style. 4. In terms of features, it comes fully equipped with a dual 12.3-inch display, in-car connectivity, voice control, and other multimedia systems.

13

0

Share

What are the reasons for the car air conditioning compressor not turning?

The reasons for the car air conditioning compressor not turning are: 1. Severe internal wear of the compressor; 2. Refrigerant leakage; 3. Faulty temperature sensor solenoid valve; 4. Circuit system malfunction; 5. Loose connection of the compressor control line; 6. Insufficient gap in the compressor electromagnetic clutch; 7. Lack of lubricating oil in the electromagnetic clutch bearing. The function of the car air conditioning compressor is to compress and transport refrigerant vapor. Its working principle is: it inhales low-temperature and low-pressure refrigerant gas from the suction pipe, compresses it through the operation of the motor driving the piston, and then discharges high-temperature and high-pressure refrigerant gas to the exhaust pipe, providing power for the refrigeration cycle.

14

3

Share

What Causes Clutch Shudder?

Here are the reasons for clutch shudder: 1. Clutch shudder: Let the engine idle, engage a low gear, slowly release the clutch pedal and increase the throttle to start. If the vehicle body shakes at this point, it indicates clutch shudder. 2. Uneven distribution of positive pressure between the driving and driven discs: The uneven elasticity of the pressure springs in frequently engaged clutches, inconsistent adjustment of the release levers, and/or uneven ends of the diaphragm spring fingers can lead to asynchronous pressure application, uneven force on the pressure plate, or even tilting of the pressure plate, resulting in poor contact between the driving and driven discs and causing clutch shudder. Automotive parts experts suggest replacing the clutch pressure springs and leveling the release levers in such cases. 3. Weakened damping spring elasticity: Weakened elasticity of the clutch torsional damping springs, weakened clutch pressure springs, or cracks in the diaphragm spring can all cause shudder during clutch engagement. The recommended solution is to replace the springs. 4. Poor contact of the clutch lining: Poor contact of the clutch lining, surface hardening, or adhesion of sticky substances can easily lead to clutch shudder. In such cases, the clutch lining should be re-bonded.

15

0

Share

What is the standard tire pressure for the Pajero?

What are the acceptance standards for engine overhaul completion?

Can Tires Be Replaced One by One?

What are the criteria for classifying legal systems?

Does the GAC Trumpchi GM6 have a 6-seater version?

What are the reasons for the car air conditioning compressor not turning?

What Causes Clutch Shudder?

What are the requirements for the single-plank bridge driving test?

Can an expired driver's license receive penalty points?

What is the normal tire pressure for Geely Boyue?

What are the regulations for rear seat seatbelt usage?