What is the standard tire pressure for the MG 5?

1 Answers
Diaz
07/29/25 12:20pm
The standard tire pressure for the MG 5 is approximately 2.4-2.5 bar. Generally, the recommended tire pressure for a car can be found on the label at the bottom of the driver's side B-pillar. Normal tire pressure reference standards: According to the international GBT2978-2008 standard, the tire pressure for standard tires is around 2.4-2.5 bar, while reinforced tires have a tire pressure of about 2.8-2.9 bar. Seasonal changes should also be considered when adjusting tire pressure. In winter, the standard tire pressure should be slightly increased by about 0.2 bar, while in summer, the tire pressure can be set slightly lower than the standard, usually by about 0.1 bar, to prevent blowouts due to high temperatures. Daily tire pressure considerations: Most cars are equipped with a tire pressure monitoring system that alerts the driver to leaks or abnormal tire pressure to ensure driving safety. It is important to regularly check the tire pressure monitoring light on the instrument panel, as both underinflated and overinflated tires can affect driving performance and increase tire wear.
Was this review help?
17
3
Share
More Forum Discussions

Where is the engine of the Geely Binrui produced?

Geely Binrui's engine is independently produced by Geely. More details about the Geely Binrui are as follows: 1. The Geely Binrui adopts a new family-style design with a black and gray color scheme, balancing fashion and sportiness. The central control area features a 10.25-inch multimedia screen, integrating the GKUI Geely ecosystem, which includes intelligent voice control, Gaode navigation, remote security assistant, and other functions. A 7-inch LCD screen replaces the traditional analog instrument cluster. 2. The car features a youthful design style, with a fastback roof and sporty high waistline as its signature exterior elements. In terms of configuration, the high-end version of the Binrui is equipped with full LED headlights, ACC adaptive cruise control, rearview camera, 17-inch wheels, etc. Regarding dimensions, the Binrui measures 4680/1785/1460mm in length, width, and height, with a wheelbase of 2670mm.
8
1
Share

What to Do When the Car Steering Wheel Is Misaligned?

The adjustment method for a misaligned car steering wheel is: 1. Turn the vehicle's steering wheel all the way to the right to expose the rear of the left front wheel; 2. After loosening the nut, rotate the left tie rod clockwise to shorten it, or counterclockwise to lengthen it; 3. Turn the steering wheel all the way to the left to expose the rear of the right front wheel; 4. After loosening the nut, rotate the right tie rod clockwise to shorten it, or counterclockwise to lengthen it. The car steering wheel is connected to the steering shaft via splines, converting the force applied by the driver on the steering wheel's edge into torque and transmitting it to the steering shaft. The buttons on the steering wheel include: 1. SET for setting speed; 2. CNL for canceling cruise control; 3. RES for resuming cruise control; 4. Up and down for volume adjustment.
8
5
Share

How to Start a Dual-Clutch Transmission Car?

Correct method to start a dual-clutch transmission car: 1. When starting, make sure to press the brake pedal, then shift into N (Neutral) gear to start the engine. 2. After the engine starts, shift into D (Drive) gear, release the brake pedal, and gently press the accelerator to start moving. Additional information about dual-clutch transmission: 1. The dual-clutch transmission may exhibit noticeable jerking during start-up, which is caused by its structure and shift logic. To mitigate this, switch to manual mode during start-up to delay upshifting, effectively reducing the jerking sensation. 2. Correct method to park a dual-clutch transmission car: When parking, first press the brake pedal until the car comes to a complete stop, then shift into N (Neutral) gear, turn off the engine, and finally shift into P (Park) gear.
10
5
Share

What Should You Pay Attention to When Driving an Automatic Transmission Car?

When driving an automatic transmission car, you need to pay attention to restricted starting, not relying solely on the P gear for parking, and avoiding switching between forward and reverse gears when the vehicle is not completely stopped. Restricted starting: If the gear is not in P or N, the vehicle cannot be started. This is a safety feature set by the manufacturer to prevent potential hazards caused by incorrect operations. Do not rely solely on the P gear for parking: Although the P gear can assist the handbrake, it cannot replace it. The P gear uses engine braking, which only provides some assistance in parking but cannot independently complete the parking action. The correct procedure is to shift into N gear after the vehicle is stopped, then engage the handbrake and release the foot brake, and finally shift into P gear to assist the handbrake in completing the parking. Avoid switching between forward and reverse gears when the vehicle is not completely stopped: Shifting from D to R before the vehicle has fully stopped creates an instant "reverse rotation pressure" on the reverse gear clutch plates, which can not only cause transmission failure but also lead to excessive wear of the clutch plates over time.
19
4
Share

What Causes High Idle Speed During Cold Engine Start?

The reasons for high idle speed during cold engine start are as follows: 1. In a cold state, the car needs to allow the engine to quickly enter the normal working environment after starting. Therefore, during a cold start, the engine control unit automatically increases fuel injection. By burning more fuel than normal idle speed, it rapidly raises the engine's coolant temperature, allowing the engine to quickly reach a suitable operating temperature. 2. This mainly manifests as a higher engine idle speed when cold, typically between 950-1300 RPM. Once the engine temperature rises to a certain level, the idle speed will decrease to the normal value. Relevant information about car idle speed is as follows: 1. Car idle speed refers to an operating condition of the car where the engine runs without load, known as idling. This means the car's gear is in neutral, figuratively speaking, the engine is "working without outputting power." 2. The engine's power comes from fuel combustion, which is achieved through the combined operation of the fuel injection system, ignition system, and mechanical structure. Therefore, unstable idle speed is often caused by abnormalities in these systems.
1
3
Share

What is the BMW E30?

The BMW E30 is a model from the BMW 3 Series, launched in the 1980s, and can be considered the most nostalgic car in the BMW 3 Series lineup. The E30 should be regarded as the second generation of the 3 Series, but the glory of the BMW 3 Series truly began with this car. More details are as follows: 1. The M-Power version of the E30 achieved outstanding results in numerous competitions, making it a championship-winning machine. 2. The production cycle of the E30 spanned from 1982 to 1994. Initially, it was only available as a two-door coupe. In 1983, a four-door version was introduced, followed by a wagon version in 1985. 3. However, this car is relatively rare in the domestic market, and prices in the used car market are not cheap. Many car modification enthusiasts still choose it for customization. 4. Of course, modifying this car is a major project. Given its age, many parts need replacement. To make it roadworthy, the entire powertrain and exhaust system require extensive upgrades, almost amounting to reassembling a car. 5. If modifying this car, a minimalist style is recommended, as it aligns better with the original car's character and helps preserve its authentic flavor.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.